| 序号 | 标准号 | 标准名称 |
 1 | SAE AMS 2506D-2003 | Coating of Fasteners Aluminum Filled Ceramic Bonded Coating |
| 2 | SAE AMS 2505D-2000 | (Noncurrent)Aluminum Paint Finishing Low Baking |
| 3 | SAE AMS 2689A-1998 | (Noncurrent)Fusion Welding Titanium and Titanium Alloys |
| 4 | SAE AMS 2685D-2002 | Welding Tungsten Arc Inert Gas (GTAW Method) |
| 5 | SAE AMS 2681B-2000 | Welding Electron-Beam |
| 6 | SAE AMS 2680C-2001 | Electron-Beam Welding for Fatigue Critical Applications |
| 7 | SAE AMS 2675G-2002 | Brazing Nickel Alloy Filler Metal |
| 8 | SAE AMS 2673D-2001 | Brazing Aluminum and Aluminum Alloys Molten Flux (Dip) |
| 9 | SAE AMS 2672F-2001 | Brazing Aluminum Torch or Furnace |
| 10 | SAE AMS 2670H-1999 | (R) Brazing Copper |
| 11 | SAE AMS 2667F-2002 | Brazing Silver For Small Pressurized Fittings |
| 12 | SAE AMS 2665G-2003 | Brazing Silver For Use Up to 400 Degrees F (204 Degrees C) |
| 13 | SAE AMS 2644D-2003 | Inspection Material Penetrant |
| 14 | SAE AMS 2664F-1995 | Brazing Silver for Use up to 800 Degrees F (427 Degrees C) |
| 15 | SAE AMS 2662-1998 | Brazing Gold-Nickel Alloy Filler Metal |
| 16 | SAE AMS 2658B-2003 | Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts |
| 17 | SAE AMS 2647B-1999 | (R) Fluorescent Penetrant Inspection Aircraft and Engine Component Maintenance |
| 18 | SAE AMS 2649B-1996 | Etch Inspection of High Strength Steel Parts |
| 19 | SAE AMS 2645K-1995 | (Cancelled)Fluorescent Penetrant Inspection by the Latest Issue of ASTM E 1417 Superseded by ASTM E1417 |
| 20 | SAE AMS 2644C-2002 | Inspection Material Penetrant Should Be Used Instead of MIL-I-25135 Which Was Cancelled on 13 March 1998 |
| 21 | SAE AMS 2643C-2002 | Structural Examination of Titanium Alloys Chemical Etch Inspection Procedure |
| 22 | SAE AMS 2642B-2003 | (R) Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure R(1994) |
| 23 | SAE AMS 2641A-1996 | Vehicle Magnetic Particle Inspection Petroleum Base |
| 24 | SAE AMS 2640K-1996 | (Cancelled)Magnetic Particle Inspection Superseded by ASTM E 1444 |
| 25 | SAE AMS 2634B-1996 | Ultrasonic Inspection Thin Wall Metal Tubing |
| 26 | SAE AMS 2633B-1995 | Ultrasonic Inspection Centrifugally-Cast Corrosion-Resistant Steel Tubular Cylinders |
| 27 | SAE AMS 2632A-1995 | Inspection Ultrasonic of Thin Materials 050 Inch (127mm) and under in Cross-Sectional Thickness |
| 28 | SAE AMS 2631B-1995 | Ultrasonic Inspection Titanium and Titanium Alloy Bar and Billet |
| 29 | SAE AMS 2630B-1995 | Inspection Ultrasonic Product over 05 Inch (127 mm) Thick |
| 30 | SAE AMS 2629B-1994 | Fluid Jet Reference FSC 9130 R(2001) |
| 31 | SAE AMS 2628-1996 | Ultrasonic Immersion Inspection Titanium and Titanium Alloy Billet Premium Grade |
| 32 | SAE AMS 2625E-2001 | (Cancelled)Pressure Testing Hydraulic 2500 psi |
| 33 | SAE AMS 2773-1999 | Heat Treatment Cast Nickel Alloy and Cobalt Alloy Parts |
| 34 | SAE AMS 2772C-2002 | (R) Heat Treatment of Aluminum Alloy Raw Materials |
| 35 | SAE AMS 2771B-2000 | (R) Heat Treatment of Aluminum Alloy Castings Superseding SAE AMS-H-6088 |
| 36 | SAE AMS 2770G-2003 | Heat Treatment of Wrought Aluminum Alloy Parts |
| 37 | SAE AMS 2769-1996 | Heat Treatment of Parts in a Vacuum R(2001) |
| 38 | SAE AMS 2762B-2002 | (Noncurrent)Carburizing Carbon and Low-Alloy Steel Parts |
| 39 | SAE AMS 2759C-2000 | Heat Treatment of Steel Parts General Requirements |
| 40 | SAE AMS 2759/9B-2003 | Hydrogen Embrittlement Relief (Baking) of Steel Parts |
| 41 | SAE AMS 2759/7A-2001 | Carburizing and Heat Treatment of Carburizing Grade Steel Parts |
| 42 | SAE AMS 2759/8-1992 | Ion Nitriding |
| 43 | SAE AMS 2755E-1996 | (Noncurrent)Nitriding Molten Salt Bath |
| 44 | SAE AMS 2759/6A-2002 | Gas Nitriding and Heat Treatment of Low-Alloy Steel Parts |
| 45 | SAE AMS 2759/5C-1999 | Heat Treatment Martensitic Corrosion Resistant Steel Parts |
| 46 | SAE AMS 2759/4B-1996 | Heat Treatment Austenitic Corrosion-Resistant Steel Parts R(2001) |
| 47 | SAE AMS 2759/3C-2000 | Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts |
| 48 | SAE AMS 2759/2C-2000 | Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher |
| 49 | SAE AMS 2759/1C-2000 | Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa) |
| 50 | SAE AMS 2759/10-1999 | Automated Gaseous Nitrding Controlled by Nitriding Potential |
| 51 | SAE AMS 2757A-1996 | Gaseous Nitrocarburizing |
| 52 | SAE AMS 2756A-1984 | (Noncurrent)Gas Nitriding of Steel Parts R(2000) |
| 53 | SAE AMS 2755D-1996 | Nitriding Molten Salt Bath |
| 54 | SAE AMS 2753B-1991 | Liquid Salt Bath Ferritic Nitrocarburizing Non-Cyanide Bath R(1995) |
| 55 | SAE AMS 2750C-1990 | Pyrometry R(1994) |
| 56 | SAE AMS 2745-2001 | Induction Hardening of Steel Parts |
| 57 | SAE AMS 2728-1988 | Heat Treatment of Wrought Copper Beryllium Alloy Parts R(1994) |
| 58 | SAE AMS 2700A-2002 | Passivation of Corrosion Resistant Steels |
| 59 | SAE AMS 2695C-2001 | Connections Electrical Solderless Wire-Wrapped |
| 60 | SAE AMS 2694A-1984 | Repair Welding of Aerospace Castings R(1994) |
| 61 | SAE AMS 2690C-1988 | (Noncurrent)Parallel Gap Welding Micro-Electronic Interconnections to Thin Film Substrates |