| 序号 | 标准号 | 标准名称 |
 1 | ISO 8144.1-1995 | 隔热限制通风的通风屋顶用矿木垫子 Thermal insulation -- Mineral wool mats for ventilated roof spaces -- Part 1: Specification for applications with restricted ventilation |
| 2 | ISO 8144.2-1995 | 隔热无限制通风的通风屋顶用矿木垫子 Thermal Insulation - Mineral Wool Mats for Ventilated Roof Spaces - Part 2: Specification for Horizontal Applications with Unrestricted Ventilation First Edition |
| 3 | ISO 8145-1994 | 热绝缘超平台式屋顶用玻璃棉板规范 Thermal insulation -- Mineral wool board for overdeck insulation of roofs -- Specification |
| 4 | ISO 8146-1985 | 造船和海上建筑物长形孔板桅杆 Shipbuilding and Marine Structures - Oval Eyeplates First Edition |
| 5 | ISO 8147-1995 | 造船和海船设施桅杆式起重机设备和元部件 Shipbuilding and marine structures -- Derrick rigs and component parts -- Vocabulary |
| 6 | ISO 8148-1985 | 造船和海上建筑物悬臂起重机吊杆顶端装置固定型 Shipbuilding and marine structures -- Derrick boom headfittings -- Fixed type |
| 7 | ISO 815 Technical Corrigendum 1-1993 | 硫化橡胶或热塑橡胶在常温、高温或低温下的压缩变形测定技术勘误1 Rubber vulcanized or thermoplastic; determination of compression set at ambient elevated or low temperatures; Technical Corrigendum 1 |
| 8 | ISO 8130.8-1994 | 涂覆用粉第8部分:热固用粉储藏稳定性评定 Coating powders -- Part 8: Assessment of the storage stability of thermosetting powders |
| 9 | ISO 8130.9-1992 | 涂覆用粉第9部分:取样 Coating powders -- Part 9: Sampling |
| 10 | ISO 8131-1992 | 液压传动单杆气缸16MPa(160 bar)小型系列公差 Hydraulic fluid power -- Single rod cylinders 16 MPa (160 bar) compact series -- Tolerances |
| 11 | ISO 813-1997 | 硫化的或热塑性橡胶对硬衬粘合力的测定90度剥离法 Rubber vulcanized or thermoplastic -- Determination of adhesion to a rigid substrate -- 90 degree peel method |
| 12 | ISO 8132-1986 | 液压传动160巴(16MPa)和250巴(25MPa)系列的单杆液压缸辅助设备安装尺寸 Hydraulic fluid power -- Single rod cylinders 160 bar (16 MPa) medium and 250 bar (25 MPa) series -- Mounting dimensions for accessories |
| 13 | ISO 8133-1991 | 液压传动单杆液压缸16MPa小型附件装配尺寸 Hydraulic fluid power -- Single rod cylinders 16 MPa (160 bar) compact series -- Accessory mounting dimensions |
| 14 | ISO 8135-1999 | 液压传动160巴(16MPa)和250巴(25MPa)中型系列的单杆液压缸公差 Hydraulic fluid power -- Single rod cylinders 16 MPa (160 bar) medium and 25 MPa (250 bar) series -- Tolerances |
| 15 | ISO 8137-1986 | 液压传动250巴(25MPa)系列单杆液压缸油口尺寸 Hydraulic fluid power -- Single rod cylinders 250 bar (25 MPa) series -- Port dimensions |
| 16 | ISO 8138-1998 | 液压传动160MPa(160bar)小型系列单杆液压缸油口尺寸 Hydraulic Fluid Power - Single Rod Cylinders 160 MPa (160 Bar) Compact Series - Port Dimensions Second Edition |
| 17 | ISO 8139-1991 | 气液传动1000 kPa(10巴)系列气缸活塞杆端球面孔安装尺寸 Pneumatic Fluid Power - Cylinders 1 000 kPa (10 Bar) Series - Rod End Spherical Eyes - Mounting Dimensions Second Edition |
| 18 | ISO 8130.2-1992 | 涂覆用粉第2部分:用气体比较比重瓶法测定密度 Coating powders -- Part 2: Determination of density by gas comparison pyknometer (referee method) |
| 19 | ISO 8130.3-1992 | 涂覆用粉第3部分:用液体置换比重计法测定密度 Coating powders -- Part 3: Determination of density by liquid displacement pyknometer |
| 20 | ISO 8130.4-1992 | 涂覆用粉第4部分:爆炸下限值的计算 Coating powders -- Part 4: Calculation of lower explosion limit |
| 21 | ISO 8130.5-1992 | 涂覆用粉第5部分:粉/气混合物流动特性的测定 Coating powders -- Part 5: Determination of flow properties of a powder/air mixture |
| 22 | ISO 8130.6-1992 | 涂覆用粉第6部分:在给定温度下热固涂覆用粉热凝时间测定 Coating powders -- Part 6: Determination of gel time of thermosetting coating powders at a given temperature |
| 23 | ISO 8130.7-1992 | 涂覆用粉第7部分:烘干重量损失测定 Coating powders -- Part 7: Determination of loss of mass on stoving |
| 24 | ISO 8130-4 Technical Corrigendum 1-1993 | 涂覆用粉第4部分:爆炸下限值的计算技术勘误1 Coating powders; part 4: calculation of lower explosion limit; Technical Corrigendum 1 |
| 25 | ISO 8130.6 AMD 1-1998 | 涂覆用粉第6部分:在给定温度下热固涂覆用粉热凝时间测定第1次修订 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature; Amendment 1 |
| 26 | ISO 8127.1-1989 | 缩微摄影技术A6型缩微胶卷盒第1部分:16mm缩微胶卷用的5槽胶卷盒 Micrographics -- A6 size microfilm jackets -- Part 1: Five channel jacket for 16 mm microfilm |
| 27 | ISO 8127.2-1999 | 缩微摄影技术A6型缩微胶卷盒第2部分:16mm和35mm缩微胶卷用的其它类型的胶卷盒 Micrographics -- A6 size microfilm jackets -- Part 2: Other types of jacket for 16 mm and 35 mm microfilm |
| 28 | ISO 8128.1-1993 | 苹果汁浓缩苹果汁和含苹果汁的饮料展开青霉素含量的测定第1部分:高性能液相色谱方法 Apple juice apple juice concentrates and drinks containing apple juice -- Determination of patulin content -- Part 1: Method using high-performance liquid chromatography |
| 29 | ISO 8128.2-1993 | 苹果汁浓缩苹果汁和含苹果汁的饮料展开青霉素含量的测定第2部分:薄层色谱方法 Apple juice apple juice concentrates and drinks containing apple juice -- Determination of patulin content -- Part 2: Method using thin-layer chromatography |
| 30 | ISO 8130.10-1998 | 涂覆用粉第10部分:测定熔敷效率 Coating powders -- Part 10: Determination of deposition efficiency |
| 31 | ISO 8130.11-1997 | 涂覆用粉第11部分:斜面变形试验 Coating Powers - Part 11: Inclined-Plane Flow Test First Edition |
| 32 | ISO 8130.1-1992 | 涂覆用粉第1部分:用筛分法测定粒度分布 Coating powders -- Part 1: Determination of particle size distribution by sieving |
| 33 | ISO 8130.12-1998 | 涂覆用粉第12部分:测定可混用性 Coating powders -- Part 12: Determination of compatibility |
| 34 | ISO 8130.13-2001 | 涂覆用粉第13部分:用激光衍射法分析粒径 Coating powders -- Part 13: Particle size analysis by laser diffraction |
| 35 | ISO 8130.14-2004 | 粉末涂层 第14部分：术语 Coating powders -- Part 14: Terminology |
| 36 | ISO 8121-1986 | 纺织机械针织机铭牌内容 Textile Machinery - Knitting Machines - Nameplate Information First Edition; (Corrigendum 1-1992) |
| 37 | ISO 812-1991 | 硫化橡胶低温脆性测定 Rubber vulcanized -- Determination of low-temperature brittleness |
| 38 | ISO 8123-1991 | 道路车辆起动发动机径节小齿轮 Road vehicles -- Diametral pitch starter motor pinions |
| 39 | ISO 8124.2-1994 | 玩具的安全性易燃性 Safety of toys -- Part 2: Flammability |
| 40 | ISO 8124.3-1997 | 玩具的安全性第3部分:特定元件的移动 Safety of toys -- Part 3: Migration of certain elements |
| 41 | ISO 8126-2000 | 缩微摄影技术复制胶片银重氮和多孔胶片视觉密度规范和测量 Micrographics -- Duplicating film silver diazo and vesicular -- Visual density -- Specifications and measurement |
| 42 | ISO 8121 Technical Corrigendum 1-1992 | 纺织机械针织机铝牌信息技术勘误1 Textile machinery; knitting machines; nameplate information; technical corrigendum 1 |
| 43 | ISO 8122-2003 | 纺织机械织机大直径环形针织机的针号 Textile Machinery - Knitting Machines - Number of Needles for Circular Knitting Machines of Large Nominal Diameter Second Edition |
| 44 | ISO 8116.6-1995 | 纺织机械和附件络纱经轴第6部分:织带和织针带经轴 Textile machinery and accessories -- Beams for winding -- Part 6: Beams for ribbon weaving and ribbon knitting |
| 45 | ISO 8116.7-1995 | 纺织机械和附件络纱经轴第7部分:条子纱织带和织针带经轴 Textile Machinery and Accessories - Beams for Winding - Part 7: Beams for Dyeing Silvers Rovings and Yarns First Edition; (Replaces ISO 1037) |
| 46 | ISO 8116.8-1995 | 纺织机械和附件络纱经轴第8部分:跳动误差和测量方法的定义 Textile machinery and accessories -- Beams for winding -- Part 8: Definitions of run-out tolerances and methods of measurement |
| 47 | ISO 8116.9-1991 | 纺织机械和附件卷线轴第9部分:织物染色轴 Textile machinery and accessories -- Beams for winding -- Part 9: Dyeing beams for textile fabrics |
| 48 | ISO 8118-1986 | 织机边撑圆筒三种语言版 Weaving machines -- Temple cylinders |
| 49 | ISO 8119.1-1989 | 纺织机械和附件针织机用针术语第1部分:闩锁式针 Textile machinery and accessories -- Needles for knitting machines -- Terminology -- Part 1: Latch-type needles |
| 50 | ISO 8119.2-1989 | 纺织机械和附件针织机用针术语第2部分:钩针 Textile machinery and accessories -- Needles for knitting machines -- Terminology -- Part 2: Bearded needles |
| 51 | ISO 8119.3-1992 | 纺织机械和附件针织机用针术语第3部分:复合针 Textile Machinery and Accessories - Needles for Knitting Machines - Terminology - Part 3: Compound Needles First Edition |
| 52 | ISO 812 AMD 1-1972 | 第1次修改 Amendment 1-1972 |
| 53 | ISO 8117-2003 | 纺织机械针织机环型织机的公称直径 Textile machinery -- Knitting machines -- Nominal diameters of circular machines |
| 54 | ISO 8114-1990 | 纺织机械和附件环锭纺纱及并线机用锭子等义术语一览表 Textile Machinery and Accessories - Spindles for Ring-Spinning and Doubling Machines - List of Equivalent Terms First Edition |
| 55 | ISO 8115-1986 | 棉包尺寸和密度 Cotton bales -- Dimensions and density |
| 56 | ISO 8115.2-1994 | 棉包第2部分:人造棉纤维的棉包尺寸 Bales -- Part 2: Bales of man-made staple fibres -- Dimensions |
| 57 | ISO 8115.3-1995 | 棉包第3部分:棉纤维棉包包装和加标签 Bales -- Part 3: Bales of cotton -- Packaging and labelling |
| 58 | ISO 8116.1-1995 | 纺织机械和附件络纱经轴第1部分:一般词汇 Textile Machinery and Accessories - Beams for Winding - Part 1: General Vocabulary Second Edition |
| 59 | ISO 8116.2-1995 | 纺织机械和附件络纱经轴第2部分:整经轴 Textile machinery and accessories -- Beams for winding -- Part 2: Warpers beams |
| 60 | ISO 8116.3-1995 | 纺织机械和附件络纱经轴第3部分:织轴 Textile machinery and accessories -- Beams for winding -- Part 3: Weavers beams |
| 61 | ISO 8116.4-1995 | 纺织机械和附件络纱经轴第4部分:织轴、整经轴和分段轴用法兰质量分类 Textile machinery and accessories -- Beams for winding -- Part 4: Quality classification of flanges for weavers beams warpers beams and sectional beams |
| 62 | ISO 8116.5-1995 | 纺织机械和附件卷线轴第5部分:经编机的分段织轴 Textile Machinery and Accessories - Beams for Winding - Part 5: Sectional Beams for Warp Knitting Machines Second Edition |
| 63 | ISO 8113-2004 | 玻璃容器耐垂直负荷性试验方法 Glass containers -- Resistance to vertical load -- Test method |
| 64 | ISO 8096.3-1988 | 防水布用的橡胶或塑料涂敷的织物规范第3部分:天然橡胶和合成橡胶涂敷的织物 Rubber- or Plastics-Coated Fabrics for Water-Resistant Clothing - Specification - Part 3: Natural Rubber- and Synthetic Rubber-Coated Fabrics First Edition |
| 65 | ISO 8097-2001 | 航空器经认证的航空成组装运设备的最低飞行性能要求和试验条件 Aircraft -- Minimum airworthiness requirements and test conditions for certified air cargo unit load devices |
| 66 | ISO 8098-2002 | 自行车幼童用自行车的安全要求 Cycles -- Safety requirements for bicycles for young children |
| 67 | ISO 8099-2000 | 小型船舶卫生间废弃物滞留系统 Small craft -- Toilet waste retention systems |
| 68 | ISO 810-1973 | 镁和镁合金锰含量的测定高碘酸盐光度法(锰含量小于001%) Magnesium and magnesium alloys -- Determination of manganese -- Periodate photometric method (Manganese content less than 001 %) |
| 69 | ISO 8107-1993 | 核电站维护术语 Nuclear power plants -- Maintainability -- Terminology |
| 70 | ISO 8109-1990 | 银行和有关金融业务证券欧洲债券格式 Banking and related financial services -- Securities -- Format of Eurobonds |
| 71 | ISO 811-1981 | 纺织纤维耐水渗透性的测定静水压试验 Textile fabrics -- Determination of resistance to water penetration -- Hydrostatic pressure test |
| 72 | ISO 8112-1984 | 工业用己内酰胺50%己内酰胺水溶液颜色的测定用单位Hazen(铂钴标度)表示光谱测定法 Caprolactam for Industrial Use - Determination of Colour of 50 % Aqueous Caprolactam Solution Expressed in Hazen Units (Platinum-Cobalt Scale) - Spectrometric Method First Edition |
| 73 | ISO 8106-2004 | 玻璃容器用重量法测定容量试验方法 Glass containers -- Determination of capacity by gravimetric method -- Test method |
| 74 | ISO 8092.1-1996 | 道路车辆电子线路板的成组配线装置第1部分:单极联接接头标记命名和特殊要求 Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 1: Tabs for single-pole connections -- Dimensions and specific requirements |
| 75 | ISO 8092.2-2000 | 道路车辆车载电气线束的连接第2部分:定义、试验方法和一般性能要求 Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 2: Definitions test methods and general performance requirements |
| 76 | ISO 8092.3-1996 | 道路车辆电子线路板的成组配线装置第3部分:多极连接的标记尺寸和特殊要求 Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 3: Tabs for multi-pole connections -- Dimensions and specific requirements |
| 77 | ISO 8092.4-1997 | 道路车辆电子线路板的成组配线装置第4部分:单极和多极连接器用销钉尺寸和特殊要求 Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 4: Pins for single- and multi-pole connections -- Dimensions and specific requirements |
| 78 | ISO 8093-1985 | 道路车辆电子系统的故障判断试验 Road vehicles -- Diagnostic testing of electronic systems |
| 79 | ISO 8094-1984 | 钢丝芯线输送机皮带缆索芯线涂层粘合强度试验 Steel cord conveyor belts -- Adhesion strength test of the cover to the core layer |
| 80 | ISO 8095-1990 | 油布用聚氯乙烯涂层织物规范 PVC-coated fabrics for tarpaulins -- Specification |
| 81 | ISO 8096.1 Technical Corrigendum 1-1991 | 防水布用的橡胶或塑料涂敷的织物规范第1部分:PVC涂层纤维技术勘误1 Rubber- or plastics-coated fabrics for water-resistant clothing; specification; part 1: PVC-coated fabrics; technical corrigendum 1 |
| 82 | ISO 8096-2005 | 防水布用的橡胶或塑料涂敷的织物规格 Rubber- or plastics-coated fabrics for water-resistant clothing -- Specification |
| 83 | ISO 8085.1-2001 | 与气体燃料供应用聚氯乙烯管一起使用的聚氯乙烯配件米制系列规范第1部分:通过加热器具进行的套筒熔融用配件 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 1: Fittings for socket fusion using heated tools |
| 84 | ISO 8085.2-2001 | 与气体燃料供应用聚氯乙烯管一起使用的聚氯乙烯配件米制系列规范第2部分:熔接用、通过加热器具进行的套筒熔融用、与电熔融一起使用的配件 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 2: Spigot fittings for butt fusion for socket fusion using heated tools and for use with electrofusion fittings |
| 85 | ISO 8085.3-2001 | 气体燃料供应用的与聚乙烯管一起使用的聚乙烯配件米制系列规范第3部分:电熔融配件 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 3: Electrofusion fittings |
| 86 | ISO 8087-1985 | 移动式起重机卷筒和绳轮尺寸 Mobile cranes -- Drum and sheave sizes |
| 87 | ISO 8088-1994 | 橄榄油的磨炼和橄榄油制品的词汇 Equipment for olive cultivation and olive oil production -- Vocabulary |
| 88 | ISO 8090-1990 | 自行车术语 Cycles -- Terminology |
| 89 | ISO 809-1973 | 镁和镁合金锰含量的测定高碘酸盐光度法(锰含量为00108%) Magnesium and magnesium alloys -- Determination of manganese -- Periodate photometric method (Manganese content between 001 and 08 %) |
| 90 | ISO 8085.2 Technical Corrigendum 1-2001 | 与供应气体燃料的聚乙烯管一起使用的聚乙烯配件米制系列规范第2部分: 对融接用、使用加热工具的套管融接用并与电融接配件一起使用的套接配件技术勘误1 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 2: Spigot fittings for butt fusion for socket fusion using heated tools and for use with electrofusion fittings; Technical Corri |
| 91 | ISO 8086-2004 | 乳品厂卫生条件验收总则和抽样程序 Dairy plant -- Hygiene conditions -- General guidance on inspection and sampling procedures |
| 92 | ISO 8074-1985 | 航空航天奥氏体不锈钢零件的表面处理 Aerospace -- Surface treatment of austenitic stainless steel parts |
| 93 | ISO 8075-1985 | 航空航天可淬硬的不锈钢零件表面处理 Aerospace - Surface Treatment of Hardenable Stainless Steel Parts First Edition |
| 94 | ISO 8078-1984 | 航空航天工艺铝合金的阳极处理非染色涂层的硫酸工艺规程 Aerospace Process - Anodic Treatment of Aluminium Alloys - Sulfuric Acid Process Undyed Coating First Edition |
| 95 | ISO 8079-1984 | 航空航天工艺铝合金的阳极处理硫酸工艺法处理着色涂层 Aerospace process -- Anodic treatment of aluminium alloys -- Sulfuric acid process dyed coating |
| 96 | ISO 8080-1985 | 航空航天钛和钛合金的阳极处理硫酸工艺法 Aerospace -- Anodic treatment of titanium and titanium alloys -- Sulfuric acid process |
| 97 | ISO 8081-1985 | 航空航天工艺铝合金的化学转化涂层一般用途 Aerospace process -- Chemical conversion coating for aluminium alloys -- General purpose |
| 98 | ISO 808-1973 | 铝和铝合金硅含量的测定用还原硅钼酸络含物的分光光度法 Aluminium and aluminium alloys -- Determination of silicon -- Spectrophotometric method with the reduced silicomolybdic complex |
| 99 | ISO 8083-1989 | 林业机械防降落物保护结构实验室试验和性能要求 Machinery for forestry -- Falling-object protective structures -- Laboratory tests and performance requirements |
| 100 | ISO 8082-2003 | 自行式林业机械防倾翻结构实验室试验和性能要求 Self-propelled machinery for forestry -- Roll-over protective structures -- Laboratory tests and performance requirements |