| 序号 | 标准号 | 标准名称 |
 1 | ISO 19105-2000 | 地理信息一致性及试验 Geographic information -- Conformance and testing |
| 2 | ISO 19108-2002 | 地理信息暂存概要 Geographic information -- Temporal schema |
| 3 | ISO 19107-2003 | 地理信息 立体图 Geographic information -- Spatial schema |
| 4 | ISO 19019-2005 | 远洋船和海上技术 试航的计划、实施和记录导则 Sea-going vessels and marine technology -- Instructions for planning carrying out and reporting sea trials |
| 5 | ISO 19109-2005 | 地理信息 应用模式规则 Geographic information -- Rules for application schema |
| 6 | ISO 19054-2005 | 夹持医疗器械的滑轨系统 Rail systems for supporting medical equipment |
| 7 | ISO 19018-2004 | 船舶与海上技术 术语、缩写、图形符号和导航概念 Ships and marine technology -- Terms abbreviations graphical symbols and concepts on navigation |
| 8 | ISO 19106-2004 | 地理信息 专用标准 Geographic information -- Profiles |
| 9 | ISO 19113-2002 | 地理信息质量原则 Geographic information -- Quality principles |
| 10 | ISO 19111-2003 | 地理信息 坐标空间基准 Geographic information -- Spatial referencing by coordinates |
| 11 | ISO 19115-2003 | 地理信息 元数据 Geographic information -- Metadata |
| 12 | ISO 19114-2003 | 地理信息 质量评定程序 Geographic information -- Quality evaluation procedures |
| 13 | ISO 19112-2003 | 地理信息 地理标识符的空间基准 Geographic information -- Spatial referencing by geographic identifiers |
| 14 | ISO 19110-2005 | 地理信息 要素编目方法 Geographic information -- Methodology for feature cataloguing |
| 15 | ISO 19119-2005 | 地理信息 服务 Geographic information -- Services |
| 16 | ISO 19117-2005 | 地理信息 图示表达 Geographic information -- Portrayal |
| 17 | ISO 19116-2004 | 地理信息 定位业务 Geographic information -- Positioning services |
| 18 | ISO 19125.1-2004 | 地理信息 简单要素查询 第1部分：一般结构 Geographic information -- Simple feature access -- Part 1: Common architecture |
| 19 | ISO 8440-1986 | 贸易文件编码位置 Location of codes in trade documents |
| 20 | ISO 8441.1-1991 | 信息技术高密度数字记录(HDDR)第1部分:HDDR应用无记录磁带 Information Technology - High Density Digital Recording (HDDR) - Part 1: Unrecorded Magnetic Tape for (HDDR) Applications First Edition |
| 21 | ISO 8441.2-1991 | 信息技术高密度数字记录(HDDR)第2部分:交换惯例指南 Information Technology - High Density Digital Recording (HDDR) - Part 2: Guide for Interchange Practice First Edition |
| 22 | ISO 8442.1-1997 | 与餐具有关的材料和物件餐具和凹形餐具第1部分:食物准备餐具的要求 Materials and articles in contact with foodstuffs -- Cutlery and table holloware -- Part 1: Requirements for cutlery for the preparation of food |
| 23 | ISO 8442.3-1997 | 与餐具有关的材料和物件餐具和凹形餐具第3部分:银盘和装饰性凹盘的要求 Materials and articles in contact with foodstuffs -- Cutlery and table holloware -- Part 3: Requirements for silver-plated table and decorative holloware |
| 24 | ISO 8442.2-1997 | 与食品接触的材料和制品 刀具和凹形餐具 第2部分:不锈钢和镀银刀具的要求 Materials and articles in contact with foodstuffs -- Cutlery and table holloware -- Part 2: Requirements for stainless steel and silver-plated cutlery |
| 25 | ISO 8442.4-1997 | 与食品接触的材料和制品 刀具和凹型餐具 第4部分：镀金刀具的要求 Materials and articles in contact with foodstuffs -- Cutlery and table holloware -- Part 4: Requirements for gold plated cutlery |
| 26 | ISO 8440 Technical Corrigendum 1-2000 | 贸易文件中代码的位置技术勘误1 Location of codes in trade documents - Technical Corrigendum 1 |
| 27 | ISO 844-2004 | 硬质泡沫塑料压缩特性的测定 Rigid cellular plastics -- Determination of compression properties |
| 28 | ISO 8432-1987 | 香精油用高性能液相色谱法分析一般方法 Essential oils -- Analysis by high performance liquid chromatography -- General method |
| 29 | ISO 8434.1-1994 | 液压传动和通用金属导管的接头第1部分:24度压合接头 Metallic tube connections for fluid power and general use -- Part 1: 24 degree compression fittings |
| 30 | ISO 8434.2-1994 | 液压及通用金属管件第2部分:37度喇叭口管件 Metallic tube connections for fluid power and general use -- Part 2: 37 degree flared fittings |
| 31 | ISO 8434.4-1995 | 液压及通用金属管连接件第4部分:有O形面密封焊制管接头的24度圆锥体连接件 Metallic tube connections for fluid power and general use -- Part 4: 24 degree cone connectors with O-ring weld-on nipples |
| 32 | ISO 8434.5-1995 | 液压及通用金属连接管件第5部分:加螺纹液压传动连接管件的试验方法 Metallic tube connections for fluid power and general use -- Part 5: Test methods for threaded hydraulic fluid power connections |
| 33 | ISO 8437-1989 | 扫雪机安全要求和试验程序 Snowthrowers -- Safety requirements and test procedures |
| 34 | ISO 8439-1990 | 形状设计基本配置 Forms design -- Basic layout |
| 35 | ISO 8437 AMD 1-1997 | 扫雪机安全要求和试验程序修改件1 Snowthrowers - Safety requirements and test procedures; Amendment 1 |
| 36 | ISO 8434.3-2005 | 液压及通用金属管件第3部分:O形面密封管件 Metallic tube connections for fluid power and general use -- Part 3: O-ring face seal connectors |
| 37 | ISO 8430.1-1988 | 电阻点焊电极夹具第1部分:锥形接头锥度1:10 Resistance spot welding -- Electrode holders -- Part 1: Taper fixing 1:10 |
| 38 | ISO 8426-1988 | 液压传动正排量泵及电动机确定导出的负载能力 Hydraulic fluid power -- Positive displacement pumps and motors -- Determination of derived capacity |
| 39 | ISO 8429-1986 | 光学和光学仪器眼科学分度盘刻度 Optics and optical instruments -- Ophthalmology -- Graduated dial scale |
| 40 | ISO 8430.2-1988 | 电阻点焊电极夹具第2部分:莫氏(morse)锥形接头 Resistance spot welding -- Electrode holders -- Part 2: Morse taper fixing |
| 41 | ISO 8430.3-1988 | 电阻点焊电极夹具第3部分:端推力直柄接头 Resistance spot welding -- Electrode holders -- Part 3: Parallel shank fixing for end thrust |
| 42 | ISO 8431-1988 | 造船固定式转臂起重机船用一般货物动臂起重机 Shipbuilding -- Fixed jib cranes -- Ship-mounted type for general cargo handling |
| 43 | ISO 843-1997 | 信息和文献工作希腊字符对拉丁字符的转换 Information and documentation -- Conversion of Greek characters into Latin characters |
| 44 | ISO 8430.3 Technical Corrigendum 1-1990 | 电阻点焊焊条夹第3部分:直柄端推入固定技术勘误表1 Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust; technical corrigendum 1 |
| 45 | ISO 8421.6-1987 | 火灾防护措施词汇第6部分:撤离和疏散方式两种语言版 Fire protection -- Vocabulary -- Part 6: Evacuation and means of escape |
| 46 | ISO 8421.7-1987 | 火灾防护措施词汇第7部分:爆炸的探测和排除方法两种语言版 Fire protection -- Vocabulary -- Part 7: Explosion detection and suppression means |
| 47 | ISO 8421.8-1990 | 火灾防护措施词汇第8部分:消防营救设施和使用危险器材的专用术语 Fire protection -- Vocabulary -- Part 8: Terms specific to fire-fighting rescue services and handling hazardous materials |
| 48 | ISO 8422-1991 | 计数检验的序贯抽样方案 Sequential sampling plans for inspection by attributes |
| 49 | ISO 8423-1991 | 不合格百分率计量检验的序贯抽样方案(已知标准偏差) Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
| 50 | ISO 8424-1996 | 光学玻璃坯料抗25℃含水酸溶液腐蚀性试验和分类 Raw optical glass -- Resistance to attack by aqueous acidic solutions at 25 degrees C -- Test method and classification |
| 51 | ISO 8422 Technical Corrigendum 1-1993 | 属性检验的序列抽样方案技术勘误表1 Sequential sampling plans for inspection by attributes; technical corrigendum 1 |
| 52 | ISO 8423 Technical Corrigendum 1-1993 | 百分比不一致(已知标准偏差)用变量检验的序列抽样方案技术勘误表1 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation); technical corrigendum 1 |
| 53 | ISO 8407-1991 | 金属和合金的耐腐蚀性腐蚀试样中腐蚀生成物的清除 Corrosion of metals and alloys -- Removal of corrosion products from corrosion test specimens |
| 54 | ISO 841-2001 | 工业自动化系统和集成机床的数字控制坐标系和运动专用术语 Industrial automation systems and integration -- Numerical control of machines -- Coordinate system and motion nomenclature |
| 55 | ISO 8420-2002 | 动植物脂肪和油极性化合物含量测定 Animal and vegetable fats and oils -- Determination of content of polar compounds |
| 56 | ISO 8421.1-1987 | 火灾防护措施词汇第1部分:火灾的一般术语和现象两种语言版 Fire protection -- Vocabulary -- Part 1: General terms and phenomena of fire |
| 57 | ISO 8421.2-1987 | 火灾防护措施词汇第2部分:结构性防火两种语言版 Fire protection -- Vocabulary -- Part 2: Structural fire protection |
| 58 | ISO 8421.3-1989 | 火灾防护措施词汇第3部分:火警的探测和报警 Fire protection -- Vocabulary -- Part 3: Fire detection and alarm |
| 59 | ISO 8421.4-1990 | 火灾防护措施词汇第4部分:灭火设备 Fire protection -- Vocabulary -- Part 4: Fire extinction equipment |
| 60 | ISO 8421.5-1988 | 防火术语第5部分:烟雾控制 Fire protection -- Vocabulary -- Part 5: Smoke control |
| 61 | ISO 8419-2003 | 皮带传动窄接合型三角皮带有效长度 Belt drives -- Narrow V-belts -- Sections 9N/J 15N/J and 25N/J (lengths in the effective system) |
| 62 | ISO 8395-1995 | 电影摄影70 mm 电影磁带再生产的试验胶片的出版印刷规范 Cinematography -- Test films for the reproduction of 70 mm motion-picture release prints with magnetic stripes -- Specifications |
| 63 | ISO 8397-1988 | 固体肥料和土壤改良剂筛分试验 Solid fertilizers and soil conditioners -- Test sieving |
| 64 | ISO 8398-1989 | 固体肥料静态休止角的测量 Solid fertilizers -- Measurement of static angle of repose |
| 65 | ISO 8399.1-1998 | 航空航天附属设备和安装法兰(米制系列)第1部分:设计规范 Aerospace -- Accessory drives and mounting flanges (Metric series) -- Part 1: Design criteria |
| 66 | ISO 8399.2-1998 | 航空航天附属设备和安装法兰(米制系列)第2部分:尺寸 Aerospace -- Accessory drives and mounting flanges (Metric series) -- Part 2: Dimensions |
| 67 | ISO 8400-1985 | 电影技术16mm电影拷贝乳剂层面的位置标志 Cinematography -- Position of emulsion surface of 16 mm motion-picture prints -- Identification |
| 68 | ISO 8405-1998 | 铸模工具圆柱头顶杆的推顶套一般用途的基本系列 Tools for moulding -- Ejector sleeves with cylindrical head -- Basic series for general purposes |
| 69 | ISO 8406-2001 | 铸模用工具铸模基座圆形定位元件和垫片 Tools for moulding -- Mould bases -- Round locating elements and spacers |
| 70 | ISO 8404-2003 | 角销基本尺寸 Tools for moulding -- Angle pins |
| 71 | ISO 8382-1988 | 用于人的复苏器 Resuscitators intended for use with humans |
| 72 | ISO 8383-1985 | 船上升降机具体要求 Lifts on ships -- Specific requirements |
| 73 | ISO 8384-2000 | 船舶和造船技术挖泥船词汇 Ships and marine technology -- Dredgers -- Vocabulary |
| 74 | ISO 8385-1999 | 船和海船术语挖泥船分类 Ships and marine technology -- Dredgers -- Classification |
| 75 | ISO 8388-1998 | 针织物种类词汇 Knitted fabrics -- Types -- Vocabulary |
| 76 | ISO 8391.1-1986 | 食品的陶瓷蒸煮器皿铅和镉的释放第1部分:试验方法 Ceramic Cookware in Contact with Food - Release of Lead and Cadmium - Part 1: Method of Test First Edition; (PNS 1031-1: 1992) |
| 77 | ISO 839.1-1976 | 7/24锥度的铣刀轴第1部分:尺寸 Milling machine arbors with 7/24 tapers -- Part 1: Dimensions |
| 78 | ISO 8391.2-1986 | 食品的陶瓷蒸煮器皿铅和镉的释放第2部分:容许范围 Ceramic cookware in contact with food -- Release of lead and cadmium -- Part 2: Permissible limits |
| 79 | ISO 839.2-1977 | 7/24锥度的铣刀轴第2部分:附件 Milling machine arbors with 7/24 tapers -- Part 2: Accessories |
| 80 | ISO 8394-1988 | 建筑结构接缝产品单组分密封剂可挤压性的测定 Building construction -- Jointing products -- Determination of extrudability of one-component sealants |
| 81 | ISO 8377.2-1992 | 娱乐旅居车大篷车第2部分:燃油和燃液化石油气的空间加热器的安装 Leisure accommodation vehicles -- Motor caravans -- Part 2: Installation of oil-fired and liquefied petroleum gas-fired space heaters |
| 82 | ISO 8378.1-1986 | 信息处理以限定的频率7958次磁通变换/弧度和38次变换/mm(96次变换/in)在两侧调制录制的130mm(525in)盒式软磁盘的数据交换第1部分:尺寸、物理和磁性特征 Information processing -- Data interchange on 130 mm (525 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad 38 tpmm (96 tpi) on both sides -- Part 1: Dimensional physical and magnetic characteristics |
| 83 | ISO 8378.2-1986 | 信息处理以限定的频率7958次磁通变换/弧度和38次变换/mm(96次变换/in)在两侧调制录制的130mm(525in)盒式软磁盘的数据交换第2部分:磁道排列格式A Information processing -- Data interchange on 130 mm (525 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad 38 tpmm (96 tpi) on both sides -- Part 2: Track format A |
| 84 | ISO 8379-2001 | 越野卡车稳定性试验 Rough Terrain Trucks - Stability Tests Amendment 1 11/15/2001 |
| 85 | ISO 8380-1993 | 林业机械手提式灌木切割机和修草机切割装置保护强度 Forestry machinery -- Portable brush-cutters and grass-trimmers -- Cutting attachment guard strengt |
| 86 | ISO 8381-2000 | 以奶为基料的婴儿食品脂肪含量的测定重量分析法(基准方法) Milk-based infant foods -- Determination of fat content -- Gravimetric method (Reference method |
| 87 | ISO 838-1974 | 纸通用装订孔规格 Paper -- Holes for general filing purposes -- Specifications |
| 88 | ISO 8379 AMD 1-2001 | 不平地带卡车稳定性试验修改件1 Rough terrain trucks - Stability tests; Amendment 1 |
| 89 | ISO 8379-1998 | 越野卡车稳定性试验 Rough terrain trucks -- Stability tests |
| 90 | ISO 8370.2-1993 | 皮带传动测定仰区位置的动态试验第2部分:V形有筋皮带 Belt drives -- Dynamic test to determine pitch zone location -- Part 2: V-ribbed belts |
| 91 | ISO 8371-1994 | 铁矿石爆裂系数的测定 Iron ores -- Determination of decrepitation index |
| 92 | ISO 8373-1994 | 操作工业机器人词汇 Manipulating industrial robots -- Vocabulary |
| 93 | ISO 8374-2001 | 摄影ISO安全光条件的测定 Photography -- Determination of ISO safelight conditions |
| 94 | ISO 8375-1985 | 结构尺寸的实心木材某些物理和机械性能的测定 Solid timber in structural sizes -- Determination of some physical and mechanical properties |
| 95 | ISO 8377.1-1992 | 娱乐旅居车大篷车第1部分:居住要求 Leisure accommodation vehicles -- Motor caravans -- Part 1: Habitation requirements |
| 96 | ISO 8373 AMD 1-1996 | 操作工业机器人的词汇补充件1:附录B:多种语言的附录 Manipulating industrial robots - Vocabulary; Amendment 1: Annex B - Multilingual annex |
| 97 | ISO 8373 Technical Corrigendum 1-1996 | 操作工业机器人词汇技术勘误1 Manipulating industrial robots - Vocabulary; Technical corrigendum 1 |
| 98 | ISO 8362.3-2001 | 注射容器及附件第3部分:注射小瓶用的铝盖 Injection containers and accessories -- Part 3: Aluminium caps for injection vials |
| 99 | ISO 8362.5-1995 | 注射容器及附件第2部分:注射剂小瓶用冷动干燥塞子 Injection containers for injectables and accessories -- Part 5: Freeze drying closures for injection vials |
| 100 | ISO 8362.6-1992 | 注射容器及附件第6部分:注射小瓶用铝和塑料复合物制帽盖 Injection containers for injectables and accessories -- Part 6: Caps made of aluminium-plastics combinations for injection vials |