| 序号 | 标准号 | 标准名称 |
 1 | ISO 9455.13-1996 | 软钎焊剂试验方法第13部分:焊剂飞溅量的测定 Soft soldering fluxes -- Test methods -- Part 13: Determination of flux spattering |
| 2 | ISO 9455.14-1991 | 软钎焊剂试验方法第14部分:钎焊剂残留物胶粘度测定 Soft soldering fluxes -- Test methods -- Part 14: Assessment of tackiness of flux residues |
| 3 | ISO 9455.15-1996 | 软钎焊剂试验方法第15部分:铜腐蚀试验 Soft soldering fluxes -- Test methods -- Part 15: Copper corrosion test |
| 4 | ISO 9455.16-1998 | 软钎焊助熔剂试验方法第16部分:助熔剂功效试验湿平衡法 Soft soldering fluxes -- Test methods -- Part 16: Flux efficacy tests wetting balance method |
| 5 | ISO 9455.2-1993 | 软钎焊剂试验方法第2部分:不挥发物的测定沸点计法 Soft soldering fluxes -- Test methods -- Part 2: Determination of non-volatile matter ebulliometric method |
| 6 | ISO 9455.3-1992 | 软钎焊剂试验方法第3部分:酸值测定电势法和目测滴定法 Soft soldering fluxes -- Test methods -- Part 3: Determination of acid value potentiometric and visual titration methods |
| 7 | ISO 9455.5-1992 | 软钎焊剂试验方法第5部分:铜镜试验 Soft soldering fluxes -- Test methods -- Part 5: Copper mirror test |
| 8 | ISO 9455.6-1995 | 软钎焊剂试验方法第6部分:卤化物(不包括氟化物)的含量测定 Soft soldering fluxes -- Test methods -- Part 6: Determination and detection of halide (excluding fluoride) content |
| 9 | ISO 9455.17-2002 | 软钎焊剂试验方法第17部分:钎焊剂残留物的表面绝缘电阻梳试验和电化学迁移试验 Soft soldering fluxes -- Test methods -- Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues |
| 10 | ISO 9449-1990 | 模铸工具定心套筒 Tools for moulding -- Centring sleeves |
| 11 | ISO 9451-1989 | 木工机械手工上料平面胶合压力机术语 Woodworking machines -- Hand-loading veneering presses for flat surfaces -- Nomenclature |
| 12 | ISO 945-1975 | 铸铁石墨显微结构的表示方法 Cast iron -- Designation of microstructure of graphite |
| 13 | ISO 9452-1989 | 木工机械胶合板横切切片命名法 Woodworking machines -- Crosswise veneer splicing machines -- Nomenclature |
| 14 | ISO 9453-1990 | 软钎料合金化学成分和供货形式 Soft solder alloys -- Chemical compositions and forms |
| 15 | ISO 9454.1-1990 | 软钎焊剂分类和要求第1部分:分类、加标签和包装 Soft soldering fluxes -- Classification and requirements -- Part 1: Classification labelling and packaging |
| 16 | ISO 9454.2-1998 | 软钎焊剂分类和要求第2部分:性能要求 Soft soldering fluxes -- Classification and requirements -- Part 2: Performance requirements |
| 17 | ISO 9455.10-1998 | 软钎焊剂试验方法第10部分:助熔剂功效试验焊料展开法 Soft soldering fluxes -- Test methods -- Part 10: Flux efficacy tests solder spread method |
| 18 | ISO 9455.11-1991 | 软钎焊剂试验方法第11部分:钎焊剂残留物的可溶性 Soft soldering fluxes -- Test methods -- Part 11: Solubility of flux residues |
| 19 | ISO 9455.1-1990 | 软钎焊剂试验方法第1部分:不挥发性物质的测定重量分析法 Soft soldering fluxes -- Test methods -- Part 1: Determination of non-volatile matter gravimetric method |
| 20 | ISO 9448.11-1992 | 压制用工具导衬第11部分:F形滚珠隔圈导衬法兰连接2型 Tools for pressing -- Guide bushes -- Part 11: Form F ball cage bushes flanged type 2 |
| 21 | ISO 9448.1-1991 | 压制用工具导衬第1部分:形式 Tools for pressing -- Guide bushes -- Part 1: Forms |
| 22 | ISO 9448.2-1991 | 压制用工具导衬第2部分:A形滑移轴衬普通1型 Tools for pressing -- Guide bushes -- Part 2: Form A gliding bushes plain type 1 |
| 23 | ISO 9448.3-1991 | 压制用工具导衬第3部分:B形滚珠隔离圈轴衬普通1型 Tools for pressing -- Guide bushes -- Part 3: Form B ball cage bushes plain type 1 |
| 24 | ISO 9448.4-1991 | 压制用工具导衬第4部分:C形滑移轴衬有头1型 Tools for pressing -- Guide bushes -- Part 4: Form C gliding bushes headed type 1 |
| 25 | ISO 9448.5-1991 | 压制用工具导衬第5部分:D形滚珠隔离圈轴衬有头1型 Tools for pressing -- Guide bushes -- Part 5: Form D ball cage bushes headed type 1 |
| 26 | ISO 9448.6-1991 | 压制用工具导衬第6部分:E形滑移轴衬法兰连接1型 Tools for pressing -- Guide bushes -- Part 6: Form E gliding bushes flanged type 1 |
| 27 | ISO 9448.7-1991 | 压制用工具导衬第7部分:F形滚珠隔离轴衬法兰连接1型 Tools for pressing -- Guide bushes -- Part 7: Form F ball cage bushes flanged type 1 |
| 28 | ISO 9448.8-1991 | 压制用工具导衬第8部分:G形滑移轴衬分级1型 Tools for pressing -- Guide bushes -- Part 8: Form G gliding bushes stepped type 1 |
| 29 | ISO 9448.9-1992 | 压制用工具导衬第9部分:B形滚珠隔圈导衬滑动连接2型 Tools for pressing -- Guide bushes -- Part 9: Form B ball cage bushes plain type 2 |
| 30 | ISO 9431-1990 | 建筑制图;图纸和文本的距离和图纸上的标题栏 Construction drawings -- Spaces for drawing and for text and title blocks on drawing sheets |
| 31 | ISO 9437-1986 | 造船内河船舶马特洛索夫(Ma-trosov)锚 Shipbuilding -- Inland vessels -- Matrosov anchors |
| 32 | ISO 9438-1993 | 冶金级萤石磷总含量的测定还原磷钼酸盐光谱法 Metallurgical-grade fluorspar -- Determination of total phosphorus content -- Reduced-molybdophosphate spectrometric method |
| 33 | ISO 9439-1999 | 水质水介质中有机化合物临界需氧生物降解性的评估二氧化碳评估试验 Water quality -- Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium -- Carbon dioxide evolution test |
| 34 | ISO 9441-1988 | 钢－铌含量的测定－ＰＡＲ分光光度点 Steel -- Determination of niobium content -- PAR spectrophotometric method |
| 35 | ISO 9442-1988 | 钢用于簧片热轧带肋及带槽的扁钢公差及尺寸 Steel -- Hot-rolled ribbed and grooved flats for spring leaves -- Tolerances and dimensions |
| 36 | ISO 9443-1991 | 热处理和合金钢热轧圆棒材和线材的表面质量分类交货技术条件 Heat-treatable and alloy steels -- Surface quality classes for hot-rolled round bars and wire rods -- Technical delivery conditions |
| 37 | ISO 9448.10-1992 | 压制用工具导衬第10部分:E形滑移导衬法兰连接2型 Tools for pressing -- Guide bushes -- Part 10: Form E gliding bushes flanged type 2 |
| 38 | ISO 9445-2002 | 连续冷轧不锈钢窄带材、宽带材、板材和切割长度尺寸和形状公差 Continuously cold-rolled stainless steel narrow strip wide strip plate/sheet and cut lengths -- Tolerances on dimensions and form |
| 39 | ISO 9444-2002 | 连续热轧不锈钢带材、板材和切割长度尺寸和形状公差 Continuously hot-rolled stainless steel strip plate/sheet and cut lengths -- Tolerances on dimensions and form |
| 40 | ISO 9413-1998 | 轮胎气门嘴尺寸和规范 Tyre valves -- Dimensions and designation |
| 41 | ISO 9414-1989 | 木工机械隔板涂层机械术语 Woodworking machines -- Curtain coating machines -- Nomenclature |
| 42 | ISO 9415-1989 | 木工机械宽带砂纸打磨机械术语 Woodworking machines -- Wide belt sanding machines -- Nomenclature |
| 43 | ISO 9416-1998 | 纸张光散射系数和吸光系数(使用库贝尔卡-蒙克理论)的测定 Paper -- Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) |
| 44 | ISO 9418-1998 | 航空航天铝或铝合金固体铆钉采购规范 Aerospace -- Rivets solid in aluminium or aluminium alloys -- Procurement specification |
| 45 | ISO 94-1982 | 纺织机械和附件环锭细纱机和环锭捻线机的锭距 Textile machinery and accessories -- Spindle gauges for ring-spinning and ring-doubling frames |
| 46 | ISO 9425-1989 | 木质纤维人造板含水率的测定 Wood-Based Panels - Determination of Moisture Content First Edition; (Supersedes 767 823 and 3806) |
| 47 | ISO 9424-2003 | 木质纤维人造板试件尺寸的测量 Wood-based panels -- Determination of dimensions of test pieces |
| 48 | ISO 9404.1-1991 | 电离辐射防护层150mm、200mm和250mm厚壁用铅屏蔽部件第1部分:150mm和200mm厚百叶板 Enclosures for protection against ionizing radiation -- Lead shielding units for 150 mm 200 mm and 250 mm thick walls -- Part 1: Chevron units of 150 mm and 200 mm thickness |
| 49 | ISO 9405-2001 | 铺地织物外观变化的评定 Textile floor coverings -- Assessment of changes in appearance |
| 50 | ISO 9406-1995 | 炼铝用的碳素材料生焦碳用重量分析法测定挥发物的含量 Carbonaceous materials for the production of aluminium -- Green coke -- Determination of volatile matter content by gravimetric analysis |
| 51 | ISO 9407-1991 | 鞋号尺寸和标志的蒙多波因特(mondopoint)系列 Shoe sizes -- Mondopoint system of sizing and marking |
| 52 | ISO 9408-1999 | 水质通过在封闭的透气性测定器中需氧量的测定来评定有机化合物在水介质中的最大需氧生物降解能力 Water quality -- Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer |
| 53 | ISO 941-1980 | 香料和调味品冷水可溶萃取物的测定 Spices and condiments -- Determination of cold water-soluble extract |
| 54 | ISO 9409.1 Technical Corrigendum 1-1998 | 手控工业机器人机械界面第1部分:盘形(A式)技术勘误1 Manipulating industrial robots - Mechanical interfaces - Part 1: Plates (form A); Technical Corrigendum 1 |
| 55 | ISO 9413 AMD 1-2001 | 轮胎气门嘴尺寸和名称与符号修改件1:ISO 3号芯室气门嘴附录 Tyre valves - Dimensions and designation - Amendment 1: Addition of valves using ISO core chamber No 3 |
| 56 | ISO 9409.2-2002 | 操作型工业机器人机械接口第2部分:轴 Manipulating industrial robots -- Mechanical interfaces -- Part 2: Shafts |
| 57 | ISO 9409.1-2004 | 操作工业机器人机械界面第1部分:板 Manipulating industrial robots -- Mechanical interfaces -- Part 1: Plates |
| 58 | ISO 9396-1997 | 塑料酚醛树脂在使用自动装置的特殊条件下甲价酚醛树脂凝胶时间的测定 Plastics -- Phenolic resins -- Determination of the gel time of resols under specific conditions using automatic apparatus |
| 59 | ISO 9400-1990 | 镍基合金抗晶间腐蚀性的测定 Nickel-based alloys -- Determination of resistance to intergranular corrosion |
| 60 | ISO 9401-1991 | 机床电动夹盘的爪 Machine tools -- Jaw mountings on power chucks |
| 61 | ISO 9402-1989 | 受压力的无缝和焊(埋弧焊除外)接钢管纵向缺陷检验用全周边磁换能器/铁涂氧磁管漏磁检验 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections |
| 62 | ISO 9403-2000 | 原油运输责任货物检验导则 Crude petroleum -- Transfer accountability -- Guidelines for cargo inspection |
| 63 | ISO 940-1979 | 香料和调味品醇不溶性萃取物的测定 Spices and condiments; Determination of alcohol-soluble extract |
| 64 | ISO 9398.1-2003 | 工业洗衣机规范容量和耗水特性定义和试验第1部分:织物熨平机 Specifications for industrial laundry machines -- Definitions and testing of capacity and consumption characteristics -- Part 1: Flatwork ironing machines |
| 65 | ISO 9398.2-2003 | 工业洗衣机规范容量和耗水特性定义和试验第2部分:一次性甩干筒 Specifications for industrial laundry machines -- Definitions and testing of capacity and consumption characteristics -- Part 2: Batch drying tumblers |
| 66 | ISO 9398.3-2003 | 工业洗衣机规范容量和耗水特性定义和试验第3部分:洗涤筒 Specifications for Industrial Laundry Machines - Definitions and Testing of Capacity and Consumption Characteristics - Part 3: Washing Tunnels Second Edition |
| 67 | ISO 9398.4-2003 | 工业洗衣机规范容量和耗水特性定义和试验第4部分:洗衣-甩干机 Specifications for industrial laundry machines -- Definitions and testing of capacity and consumption characteristics -- Part 4: Washer-extractors |
| 68 | ISO 9388-1992 | 镍合金磷含量测定钼兰分子吸收光谱法 Nickel alloys -- Determination of phosphorus content -- Molybdenum blue molecular absorption spectrometric method |
| 69 | ISO 9390-1990 | 水质硼酸盐的测定用甲亚胺-H进行的光谱测定法 Water quality -- Determination of borate -- Spectrometric method using azomethine-H |
| 70 | ISO 9391-1993 | 水质宏无脊椎生物的深水取样菌落使用导则 Water quality -- Sampling in deep waters for macro-invertebrates -- Guidance on the use of colonization qualitative and quantitative samplers |
| 71 | ISO 939-1980 | 香料和调味品水含量的测定挟带法 Spices and condiments -- Determination of moisture content -- Entrainment method |
| 72 | ISO 9392-1989 | 胶凝软木盘密封性能 Agglomerated cork discs -- Sealing behaviour |
| 73 | ISO 9393.2-1997 | 热塑性塑料阀门压力试验方法和要求第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门的试验条件和基本要求 Thermoplastics valves -- Pressure test methods and requirements -- Part 2: Test conditions and basic requirements for PE PP PVC-U and PVDF valves |
| 74 | ISO 9394-1998 | 眼科光学接触镜片和接触透镜护理制品用兔眼睛研究目镜法测定生物相溶性 Ophthalmic optics -- Contact lenses and contact lens care products -- Determination of biocompatibility by ocular study using rabbit eyes |
| 75 | ISO 9393.2 Technical Corrigendum 1-1997 | 热塑性塑料阀门压力试验方法和要求第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门的试验条件和基本要求技术勘误1 Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE PP PVC-U and PVDF valves; Technical Corrigendum 1 |
| 76 | ISO 9393.1-2004 | 热塑性塑料阀门压力试验方法第1部分:总则 Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 1: General |
| 77 | ISO 9382-1990 | 船载驳全系列分类和主要要求 Shipborne barges all series -- Classification and main requirements |
| 78 | ISO 9383-1995 | 纤维加强水泥制品屋顶和镶面(建筑物)短波纹或不对称的面板和配件 Products in fibre-reinforced cement -- Short corrugated or asymmetrical section sheets and fittings for roofing |
| 79 | ISO 9384-1991 | 纤维水泥墙面板 Fibre-cement siding shingles |
| 80 | ISO 9385-1990 | 玻璃及玻璃陶瓷努氏硬度试验 Glass and glass-ceramics -- Knoop hardness test |
| 81 | ISO 9386.1-2000 | 运动性受损的残疾人用动力操纵的提升平台安全、尺寸和功能操作规则第1部分:垂直提升平台 Power-operated lifting platforms for persons with impaired mobility -- Rules for safety dimensions and functional operation -- Part 1: Vertical lifting platforms |
| 82 | ISO 9386.2-2000 | 运动性受损的残疾人用动力操纵的提升平台安全、尺寸和功能操作规则第2部分:在一个倾斜面移动的就座者、站立者和使用轮椅者用的动力升降阶梯 Power-operated lifting platforms for persons with impaired mobility -- Rules for safety dimensions and functional operation -- Part 2: Powered stairlifts for seated standing and wheelchair users moving in an inclined plane |
| 83 | ISO 9374.4-1989 | 起重机提供的信息第4部分:动臂起重机 Cranes -- Information to be provided -- Part 4: Jib cranes |
| 84 | ISO 9374.5-1991 | 起重机提供的信息第5部分:桥式起重机和龙门式起重机 Cranes -- Information to be provided -- Part 5: Overhead travelling cranes and portal bridge cranes |
| 85 | ISO 9375-1989 | 木工机械固定位置的砂轮机术语 Woodworking machines -- Disc sanding machines with spindle in fixed position -- Nomenclature |
| 86 | ISO 9376-1988 | 早马铃薯冷却和冷藏运输指南 Early potatoes -- Guide to cooling and refrigerated transport |
| 87 | ISO 9377.2-2000 | 水质油气指数的测定第2部分:溶剂萃取法和气相色谱法 Water quality -- Determination of hydrocarbon oil index -- Part 2: Method using solvent extraction and gas chromatography |
| 88 | ISO 9378-1993 | 摄影技术微泡缩微胶片ISO曝光速度和ISO曝光范围 Photography -- Vesicular microfilm -- Determination of ISO speed and ISO range |
| 89 | ISO 9379-1989 | 门具重复开、关门的试验 Doorsets -- Repeated opening and closing test |
| 90 | ISO 9380-1990 | 门具反复扭转试验 Doorsets -- Repeated torsion test |
| 91 | ISO 9381-1989 | 门具静态扭转试验 Doorsets -- Static torsion test |
| 92 | ISO 938-1975 | 手控台式运货车基本尺寸 Hand-operated stillage trucks -- Principal dimensions |
| 93 | ISO 9364-2001 | 工业连续热浸镀铝/锌薄钢板制图和结构特性 Continuous hot-dip aluminium/zinc-coated steel sheet of commercial drawing and structural qualities |
| 94 | ISO 9366-2001 | 整体地板软木弹性砖片边缘平直度和垂直度的测定与检验 Agglomerated cork floor tiles -- Determination of dimensions and deviation from squareness and from straightness of edges |
| 95 | ISO 9367.1-1989 | 滚装船上道路车辆捆绑和固定装置一般要求第1部分:商业车辆和车辆组合(半挂车除外) Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships -- General requirements -- Part 1: Commercial vehicles and combinations of vehicles semi-trailers excluded |
| 96 | ISO 9367.2-1994 | 滚装船上汽车捆绑和固定装置一般要求第2部分:半挂车 Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships -- General requirements -- Part 2: Semi-trailers |
| 97 | ISO 9368.1-1990 | 用称量法测量封闭管道中液体的流量测试装置规程第1部分:静态称量装置 Measurement of liquid flow in closed conduits by the weighing method -- Procedures for checking installations -- Part 1: Static weighing systems |
| 98 | ISO 9370-1997 | 塑料风化试验中辐射曝光的仪器测定一般导则和基本试验方法 Plastics -- Instrumental determination of radiant exposure in weathering tests -- General guidance and basic test method |
| 99 | ISO 937-1978 | 肉和肉制品氮含量的测定(参照法) Meat and meat products -- Determination of nitrogen content (Reference method) |
| 100 | ISO 9373-1989 | 起重机和有关设备试验期间测量参数精确度的要求 Cranes and related equipment -- Accuracy requirements for measuring parameters during testing |