| 序号 | 标准号 | 标准名称 |
 1 | ISO 8627-1987 | 牙科学牙刷毛簇部位的韧度 Dentistry -- Stiffness of the tufted area of tooth-brushes |
| 2 | ISO 8630.1-1987 | 信息处理以限定的频率13262次磁通变换/弧度在每侧80列磁道上调制录制的130mm(525in)盒式软磁盘的数据交换第1部分:尺寸、物理和磁性特征 Information processing -- Data interchange on 130 mm (525 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad on 80 tracks on each side -- Part 1: Dimensional physical and magnetic characteristics |
| 3 | ISO 8630.2-1987 | 信息处理以限定的频率13262次磁通变换/弧度在每侧80列磁道上调制录制的130mm(525in)盒式软磁盘的数据交换第2部分:77列磁道的磁道排列格式A Information processing -- Data interchange on 130 mm (525 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad on 80 tracks on each side -- Part 2: Track format A for 77 tracks |
| 4 | ISO 8630.3-1987 | 信息处理以限定的频率13262次磁通变换/弧度在每侧80列磁道上调制录制的130mm(525in)盒式软磁盘的数据交换第3部分:80列磁道的磁道排列格式B Information processing -- Data interchange on 130 mm (525 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad on 80 tracks on each side -- Part 3: Track format B for 80 tracks |
| 5 | ISO 8631-1989 | 信息技术程序结构和规范形式 Information Technology - Program Constructs and Conventions for Their Representation Second Edition |
| 6 | ISO 863-1990 | 水泥试验方法火山灰水泥的凝硬性试验 Cement -- Test methods -- Pozzolanicity test for pozzolanic cements |
| 7 | ISO 86.3-1995 | Primary Batteries - Part 3: Watch Batteries First Edition |
| 8 | ISO 862-1984 | 表面活性剂词汇 Surface active agents -- Vocabulary |
| 9 | ISO 8622-1998 | 电影技术70mm电影发行拷贝上的磁性录音A-通路重放特性 Cinematography -- Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes -- A-chain reproduction characteristics |
| 10 | ISO 8623-1997 | 油漆和清漆用高脂油脂肪酸规范和试验方法 Tall-oil fatty acids for paints and varnishes -- Specifications and test methods |
| 11 | ISO 8624-2002 | 眼科光学眼镜架测量系统和术语 Ophthalmic optics -- Spectacle frames -- Measuring system and terminology |
| 12 | ISO 8625.1-1993 | 航空航天液压系统词汇第1部分:与压力有关的术语和定义 Aerospace -- Fluid systems -- Vocabulary -- Part 1: General terms and definitions related to pressure |
| 13 | ISO 8625.2-1991 | 航空航天液压装置词汇第2部分:与流动有关的术语和定义 Aerospace -- Fluid systems -- Vocabulary -- Part 2: General terms and definitions relating to flow |
| 14 | ISO 8625.3-1991 | 航空航天液压装置词汇第3部分:与温度有关的术语和定义 Aerospace -- Fluid systems -- Vocabulary -- Part 3: General terms and definitions relating to temperature |
| 15 | ISO 862 Technical Corrigendum 1-1993 | 表面活性剂词汇技术勘误1 Surface active agents; vocabulary; Technical Corrigendum 1 |
| 16 | ISO 8619-2003 | 塑料酚醛树脂粉在加热玻璃板上流动距离的测定 Plastics -- Phenolic resin powder -- Determination of flow distance on a heated glass plate |
| 17 | ISO 8613.5-1994 | 信息技术开文件结构和互换格式:开文件互换格式 Information Technology - Open Document Architecture (ODA) and Interchange Format: Open Document Interchange Format Second Edition; Technical Corrigendum 1: 12-15-1998; Technical Corrigendum 2: 12-15-1998 |
| 18 | ISO 8613.6 DRAFT AMD 1 | 信息技术开文件结构和互换格式:字符内容体系结构 (Draft)Information Technology - Open Document Architecture (ODA) and Interchange Format: Character Content Architectures Amendment 1: Extensions for Coloured Lines and Emphasis 1995 |
| 19 | ISO 8613.6-1994 | 信息技术开文件结构和互换格式:字符内容体系结构 Information Technology - Open Document Architecture (ODA) and Interchange Format: Character Content Architectures Second Edition; Technical Corrigendum 1: 12-15-1998 |
| 20 | ISO 8613.7-1994 | 信息技术开文件结构和互换格式:光栅图形内容体系结构 Information Technology - Open Document Architecture (ODA) and Interchange Format: Raster Graphics Content Architectures Second Edition; Amendment 1: 12-15-1998; Technical Corrigendum 1: 12-15-1998 |
| 21 | ISO 8613.8 DRAFT AMD 1 | 信息技术开文件结构和互换格式:几何图形内容体系结构 (Draft)Information Technology - Open Document Architecture (ODA) and Interchange Format: Geometric Graphics Content Architectures Amendment 1 1995 |
| 22 | ISO 8613.8 DRAFT AMD 1-2 | 信息技术开文件结构和互换格式:几何图形内容体系结构 (Draft)Information Technology - Open Document Architecture (ODA) and Interchange Format: Geometric Graphics Content Architectures Amendment 1 1995 |
| 23 | ISO 8613.8-1994 | 信息技术开文件结构和互换格式:几何图形内容体系结构 Information Technology - Open Document Architecture (ODA) and Interchange Format: Geometric Graphics Content Architectures Second Edition |
| 24 | ISO 8613.9-1996 | 信息技术开文件结构和互换格式:声频内容体系结构 Information Technology - Open Document Architecture (ODA) and Interchange Format: Audio Content Architectures First Edition |
| 25 | ISO 8614-1997 | 滑雪板装配词汇 Ski bindings -- Vocabulary |
| 26 | ISO 8615-1991 | 外科植入物用于成人股骨未端的固定器件 Implants for surgery -- Fixation devices for use in the ends of the femur in adults |
| 27 | ISO 5960-1984 | 铜合金镉含量的测定火焰原子吸收光谱测定法Copper alloys -- Determination of cadmium content -- Flame atomic absorption spectrometric method |
| 28 | ISO 4749-1984 | 铜合金铅含量的测定火焰原子吸收光谱测定法Copper alloys -- Determination of lead content -- Flame atomic absorption spectrometric method |
| 29 | ISO 8980.4-2000 | 眼科光学未切的成品眼镜镜片第4部分:防反射涂层的试验方法和规范 Ophthalmic optics -- Uncut finished spectacle lenses -- Part 4: Specifications and test methods for anti-reflective coatings |
| 30 | ISO 8985-1998 | 塑料乙烯/乙烯基乙酸盐共聚物(ENAC)热塑性乙烯基乙酸盐含量的测定 Plastics -- Ethylene/vinyl acetate copolymer (EVAC) thermoplastics -- Determination of vinyl acetate content |
| 31 | ISO 8989-1995 | 塑料液态酚醛树脂水的可混性的测定 Plastics -- Liquid phenolic resins -- Determination of water miscibility |
| 32 | ISO 8990-1994 | 热绝缘稳定状态热传输特性的测定校正及屏蔽的隔热箱 Thermal insulation -- Determination of steady-state thermal transmission properties -- Calibrated and guarded hot box |
| 33 | ISO 8991-1986 | 紧固件的标记体系 Designation system for fasteners |
| 34 | ISO 8993-1989 | 阳极化铝和铝合金点腐蚀法评定铝及合金阳极氧化层图表法 Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Chart method |
| 35 | ISO 8994-1989 | 阳极化铝和铝合金点腐蚀法评定铝及合金阳极氧化层网格法 Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Grid method |
| 36 | ISO 8995-2002 | 室内工作场所的照明 Lighting of Indoor Work Places Second Edition |
| 37 | ISO 899.1-2003 | 塑料蠕变的测定第2部分:拉申蠕变 Plastics -- Determination of creep behaviour -- Part 1: Tensile creep |
| 38 | ISO 899.2-2003 | 塑料蠕变的测定第2部分:用抗弯负载法测定扰屈蠕变 Plastics -- Determination of creep behaviour -- Part 2: Flexural creep by three-point loading |
| 39 | ISO 8992-2005 | 紧固件螺栓螺钉螺柱和螺母的一般要求 Fasteners -- General requirements for bolts screws studs and nuts |
| 40 | ISO 8996-2004 | 人类工效学代谢热量的测定 Ergonomics of the thermal environment -- Determination of metabolic rate |
| 41 | ISO 898.5-1998 | 碳钢及合金钢制紧固件的机械性能第5部分:不受拉伸应力的定位螺钉和类似的螺纹紧固件 Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners not under tensile stresses |
| 42 | ISO 8986.1-1993 | 塑料聚丁烯模制品和挤塑用料第1部分:命名系统和基本规范 Plastics -- Polybutene (PB) moulding and extrusion materials -- Part 1: Designation system and basis for specifications |
| 43 | ISO 898.6-1994 | 紧固件的机械性能第6部分:有规定标准载荷的螺母:细牙螺纹 Mechanical properties of fasteners -- Part 6: Nuts with specified proof load values -- Fine pitch thread |
| 44 | ISO 898.7-1992 | 紧固件的机械性能第7部分:公称直径1-10mm的螺栓和螺钉的扭力试验和最小扭矩 Mechanical properties of fasteners -- Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
| 45 | ISO 8987-1995 | 塑料酚醛树脂在B转变试验板上的活化性能的测定 Plastics - Phenolic Resins - Determination of Reactivity on a B-Transformation Test Plate Second Edition |
| 46 | ISO 8988-1995 | 塑料酚醛树脂六亚甲基四胺含量的测定 Plastics -- Phenolic resins -- Determination of hexamethylenetetramine content -- Kjeldahl method and perchloric acid method |
| 47 | ISO 8986.2-1995 | 塑料 聚丁烯模塑和挤塑材料 第2部分:试样的制备和特性的测定 Plastics -- Polybutene (PB) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties |
| 48 | ISO 8986.2 AMD 1-2000 | 塑料聚丁烯(PB)模制品和挤塑用料第2部分:试样的制备和特性的测定修改件1 Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Amendment 1 |
| 49 | ISO 8981-1993 | 小麦用电泳法鉴别小麦的种类 Wheat -- Identification of varieties by electrophoresis |
| 50 | ISO 898.1-1999 | 碳钢和合金钢制造的紧固件的机械特性第1部分:螺栓螺纹和嵌钉 Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts screws and studs |
| 51 | ISO 898.2-1992 | 紧固件的机械性能第2部分:有规定的检验载荷值的螺母粗牙螺纹 Mechanical properties of fasteners -- Part 2: Nuts with specified proof load values -- Coarse thread |
| 52 | ISO 8984.1-1993 | 柴油发动机燃料喷射器的试验第1部分:手柄操作检验仪和调整仪 Diesel engines -- Testing of fuel injectors -- Part 1: Hand-lever-operated testing and setting apparatus |
| 53 | ISO 8984.2-1993 | 柴油发动机燃料喷射器的试验第2部分:试验方法 Diesel engines -- Testing of fuel injectors -- Part 2: Test methods |
| 54 | ISO 8980.3-2003 | 眼科光学未切割的成品透镜片第3部分:透光性能和试验方法 Ophthalmic optics -- Uncut finished spectacle lenses -- Part 3: Transmittance specifications and test methods |
| 55 | ISO 8980.1-2004 | 眼科光学未打磨完成的眼镜片第1部分:单光多焦透镜片规范 Ophthalmic optics -- Uncut finished spectacle lenses -- Part 1: Specifications for single-vision and multifocal lenses |
| 56 | ISO 8980.2-2004 | 眼科光学未打磨完成的眼镜片第2部分:渐变眼镜片规范 Ophthalmic optics -- Uncut finished spectacle lenses -- Part 2: Specifications for progressive power lenses |
| 57 | ISO 8979-2004 | 电子设备用的夹扭钳和剪切钳和夹钳术语 Pliers and nippers for electronics -- Nomenclature |
| 58 | ISO 8968.4-2001 | 牛奶氮含量的测定第4部分:无蛋白质氮含量的测定 Milk -- Determination of nitrogen content -- Part 4: Determination of non-protein-nitrogen content |
| 59 | ISO 8968.5-2001 | 牛奶氮含量的测定第5部分:蛋白质氮含量的测定 Milk -- Determination of nitrogen content -- Part 5: Determination of protein-nitrogen content |
| 60 | ISO 8969-1990 | 木结构单面孔金属板紧固件和接头的试验方法 Timber structures -- Testing of unilateral punched metal plate fasterners and joints |
| 61 | ISO 8970-1989 | 木结构机械紧固件连结接合处的试验木材密度要求 Timber structures -- Testing of joints made with mechanical fasteners -- Requirements for wood density |
| 62 | ISO 897-2000 | 摄影胶卷126、110和135号胶片载像面的鉴别 Photography -- Roll films 126 110 and 135-size films -- Identification of the image-bearing side |
| 63 | ISO 8973-1997 | 液化石油气密度和蒸气压力的计算 Liquefied petroleum gases -- Calculation method for density and vapour pressure |
| 64 | ISO 8974-2002 | 塑料酚醛树脂用气体色谱法测定残余酚的含量 Plastics - Phenolic Resins - Determination of Residual Phenol Content by Gas Chromatography Third Edition |
| 65 | ISO 8975-1989 | 塑料酚醛树脂pH值的测定 Plastics -- Phenolic resins -- Determination of pH |
| 66 | ISO 8977-2003 | 压制用工具圆形冲模 Tools for pressing -- Matrixes |
| 67 | ISO 8976-2004 | 夹扭钳和剪切钳 水泵钳 尺寸和试验值 Pliers and nippers -- Multiple slip joint pliers -- Dimensions and test values |
| 68 | ISO 8954.3-1990 | 铁合金词汇第3部分:筛选 Ferroalloys -- Vocabulary -- Part 3: Sieve analysis |
| 69 | ISO 8956-1986 | 组合式或非组合式车床仿形附件的验收条件精度试验 Acceptance conditions for copying attachments integral or otherwise for lathes -- Testing of the accuracy |
| 70 | ISO 8957-1996 | 信息和文献工作目录信息交换用希伯来字母代码字符集 Information and documentation -- Hebrew alphabet coded character sets for bibliographic information interchange |
| 71 | ISO 8960-1991 | 制冷机家用和类似用途用冷冻食品储藏柜和食品冷冻柜空气噪声辐射测量 Refrigerators frozen-food storage cabinets and food freezers for household and similar use -- Measurement of emission of airborne acoustical noise |
| 72 | ISO 8965-1987 | 采伐工业生产技术术语和定义三种语言版 Logging industry -- Technology -- Terms and definitions |
| 73 | ISO 8966-1987 | 采伐工业产品术语和定义三种语言版 Logging industry -- Products -- Terms and definitions |
| 74 | ISO 8967-1992 | 奶粉和奶粉制品松密度测定 Dried milk and dried milk products -- Determination of bulk density |
| 75 | ISO 8968.1-2001 | 牛奶氮含量的测定第1部分:基耶达尔(Kjedahl)法 Milk -- Determination of nitrogen content -- Part 1: Kjeldahl method |
| 76 | ISO 8968.2-2001 | 牛奶氮含量的测定第2部分:分段溶解法(宏观法) Milk -- Determination of nitrogen content -- Part 2: Block-digestion method (Macro method) |
| 77 | ISO 8968.3-2004 | 牛奶 含氮量的测定 第3部分：成块消化法(半微量常规快速法) Milk -- Determination of nitrogen content -- Part 3: Block-digestion method (Semi-micro rapid routine method) |
| 78 | ISO 8937-2000 | 敞篷车遮篷功能要求和试验方法 Caravan awnings -- Functional requirements and test methods |
| 79 | ISO 894-1977 | 表面活性剂工业用伯烷基硫酸钠分析方法 Surface active agents -- Technical sodium primary alkylsulphates -- Methods of analysis |
| 80 | ISO 8943-1991 | 轻质碳氢化合物制冷液液化天然气取样连续法 Refrigerated light hydrocarbon fluids -- Sampling of liquefied natural gas -- Continuous method |
| 81 | ISO 8945-1989 | 土壤耕作设备旋耕机刀片固定尺寸 Equipment for working the soil -- Rotary cultivator blades -- Fixing dimensions |
| 82 | ISO 8947-1993 | 农业机械土壤耕作设备S型齿:试验方法 Agricultural machinery -- Equipment for working the soil -- S-tines: test method |
| 83 | ISO 895-1977 | 表面活性剂工业用仲烷基硫酸钠分析方法 Surface active agents -- Technical sodium secondary alkylsulphates -- Methods of analysis |
| 84 | ISO 8954.1-1990 | 铁合金词汇第1部分:材料 Ferroalloys -- Vocabulary -- Part 1: Materials |
| 85 | ISO 8954.2-1990 | 铁合金词汇第2部分:取样和样品的制备 Ferroalloys -- Vocabulary -- Part 2: Sampling and sample preparation |
| 86 | ISO 8940-2002 | 航空航天锚式自锁密封自定位双耳沉孔螺母级别:900MPa/120℃900MPa/175℃C级和900MPa/235℃尺寸 Aerospace - Nuts Anchor Self-Locking Sealing Floating Two-Lug with Counterbore with MJ Threads Classifications 900 MPa (at Ambient Temperature)/ 120 Degrees Celsius 900 MPa (at Ambient Temperature)/175 Degrees Celsius and 900 MPa (at Ambient Temp |
| 87 | ISO 8936-2003 | 大篷车的遮篷安全要求 Caravan awnings -- Safety requirements |
| 88 | ISO 8612-2001 | 眼科装置眼压计 Ophthalmic instruments -- Tonometers |
| 89 | ISO 8613.1-1994 | 息技术开文件结构和互换格式:前言和总则 Information Technology - Open Document Architecture (ODA) and Interchange Format: Introduction and General Principles Second Edition; Technical Corrigendum 1: 12-15-1998 |
| 90 | ISO 8613.10-1995 | 信息技术开文件结构和交换格式第10部分:格式规范 Information Technology - Open Document Architecture (ODA) and Interchange Format - Part 10: Formal Specifications Second Edition |
| 91 | ISO 8613.11-1995 | 信息技术开文件结构和交换格式:管状结构和管状部局 Information Technology - Open Document Architecture (ODA) and Interchange Format: Tabular Structures and Tabular Layout First Edition |
| 92 | ISO 8613.12-1996 | 信息技术开文件结构和交换格式:文件段落的识别 Information Technology - Open Document Architecture (ODA) and Interchange Format: Identification of Document Fragments First Edition |
| 93 | ISO 8613.14-1997 | 信息技术开文件结构和交换格式:瞬时关系和非线性结构 Information Technology - Open Document Architecture (ODA) and Interchange Format: Temporal Relationships and Non-Linear Structures First Edition |
| 94 | ISO 8613.2-1995 | 信息处理开放式文献结构(ODA)和交换格式第2部分:文献结构 Information Technology - Open Document Architecture (ODA) and Interchange Format: Document Structures Second Edition; Technical Corrigendum 1: 12-15-1998; Technical Corrigendum 2: 12-15-198 |
| 95 | ISO 8613.3-1995 | 信息技术开文件结构和互换格式:开文件结构文献的处理的抽象界面 Information Technology - Open Document Architecture (ODA) and Interchange Format: Abstract Interface for the Manipulation of ODA Documents First Edition |
| 96 | ISO 8613.4-1994 | 信息技术开文件结构和互换格式:文献纲要 Information Technology - Open Document Architecture (ODA) and Interchange Format: Document Profile Second Edition; Technical Corrigendum 1: 12-15-1998; Technical Corrigendum 2: 12-15-1998 |
| 97 | ISO 8611.1-2004 | 联运平托盘 第1部分：试验方法 Pallets for materials handling -- Flat pallets -- Part 1: Test methods |
| 98 | ISO 860-1996 | 术语工作概念和术语的协调 Terminology work -- Harmonization of concepts and terms |
| 99 | ISO 8603-1993 | 固体肥料尿素氮含量测定占吨氢醇重量法 Solid fertilizers -- Determination of urea nitrogen content -- Gravimetric method using xanthydrol |
| 100 | ISO 8604-1988 | 塑料预浸料坯术语定义和命名符号 Plastics -- Prepregs -- Definitions of terms and symbols for designations |