| 序号 | 标准号 | 标准名称 |
 1 | ISO 8692-2004 | 水质用绿藻类栅薄属的Subspicatus和月牙藻属的capricornutum做淡水藻类生长抑制试验 Water quality -- Freshwater algal growth inhibition test with unicellular green algae |
| 2 | ISO 8686.3-1998 | 起重机载荷和复合载荷的设计原理第3部分:塔式起重机 Cranes -- Design principles for loads and load combinations -- Part 3: Tower cranes |
| 3 | ISO 8686.5-1992 | 起重机负载和复合负载设计原则第5部分:矢量绘图器 Cranes -- Design principles for loads and load combinations -- Part 5: Overhead travelling and portal bridge cranes |
| 4 | ISO 8687-1987 | 电影技术8mmS型16mm和35mm变积式光学声带的信号与噪声比测量方法 Cinematography -- Signal-to-noise ratio of 8 mm Type S 16 mm and 35 mm variable-area photographic sound records -- Method of measurement |
| 5 | ISO 8688.1-1989 | 铣刀寿命试验第1部分:平面铣刀 Tool life testing in milling -- Part 1: Face milling |
| 6 | ISO 8688.2-1989 | 铣刀寿命试验第2部分:立铣刀 Tool life testing in milling -- Part 2: End milling |
| 7 | ISO 8689.1-2000 | 水质江河的生物分类第1部分:对海底微型无脊椎动物调查的生物质量数据的解释指南 Water quality -- Biological classification of rivers -- Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates |
| 8 | ISO 8689.2-2000 | 水质江河的生物分类第2部分:对海底微型无脊椎动物调查的生物质量数据的表示指南 Water quality -- Biological classification of rivers -- Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates |
| 9 | ISO 8690-1988 | 放射污染表面的清除试验方法和清除的容易评价方法 Decontamination of radioactively contaminated surfaces -- Method for testing and assessing the ease of decontamination |
| 10 | ISO 8691-1994 | 石油产品液体燃料中钒的最低含量焚烧后用无火焰原子吸收光谱法测定 Petroleum products -- Low levels of vanadium in liquid fuels -- Determination by flameless atomic absorption spectrometry after ashing |
| 11 | ISO 8686.4-2005 | 起重机 载荷和载荷组合的设计原则 第4部分：旋臂式起重机 Cranes -- Design principles for loads and load combinations -- Part 4: Jib cranes |
| 12 | ISO 8675-1999 | 米制细牙六角薄螺母(倒角)产品等级A和B Hexagon thin nuts (chamfered) with metric fine pitch thread -- Product grades A and B |
| 13 | ISO 8676-1999 | 米制细牙螺纹六角头螺钉产品等级A级和B级 Hexagon head screws with metric fine pitch thread -- Product grades A and B |
| 14 | ISO 8678-1988 | 带小头和短颈的圆头方颈螺栓 Cup head square neck bolts with small head and short neck -- Product grade B |
| 15 | ISO 8681-1986 | 石油产品和润滑剂分类法等级的定义 Petroleum products and lubricants -- Method of classification -- Definition of classes |
| 16 | ISO 8682-1987 | 苹果在受控气氛下贮存 Apples -- Storage in controlled atmospheres |
| 17 | ISO 8683-1988 | 莴笋预冷和冷藏运输指南 Lettuce -- Guide to precooling and refrigerated transport |
| 18 | ISO 8685-1992 | 铝矿石取样规程 Aluminium ores -- Sampling procedures |
| 19 | ISO 8686.1-1989 | 起重机载荷和复合载荷的设计原理第1部分:总则 Cranes -- Design principles for loads and load combinations -- Part 1: General |
| 20 | ISO 868-2003 | 塑料和硬质橡胶用硬度计测定压痕硬度[肖氏(SHORE)硬度] Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness) |
| 21 | ISO 8686.2-2004 | 起重机 载荷和载荷组合的设计原则 第2部分：移动式起重机 Cranes -- Design principles for loads and load combinations -- Part 2: Mobile cranes |
| 22 | ISO 8668.5-1992 | 飞机终端连接系统第5部分:3型系统详细规范 Aircraft -- Terminal junction systems -- Part 5: Detail specification for type 3 system |
| 23 | ISO 8668.6-1994 | 飞机终端连接系统第4部分:2型系统的详细规范 Aircraft -- Terminal junction systems -- Part 6: Detail specification for type 4 system |
| 24 | ISO 8669.1-1988 | 尿收集袋第1部分:词汇 Urine collection bags -- Part 1: Vocabulary |
| 25 | ISO 8669.2-1996 | 尿收集袋第2部分:要求和试验方法 Urine collection bags -- Part 2: Requirements and test methods |
| 26 | ISO 8670.1-1988 | 造瘘术集袋第1部分:词汇 Ostomy collection bags -- Part 1: Vocabulary |
| 27 | ISO 8670.2-1996 | 造口术收集袋第2部分:要求和试验方法 Ostomy collection bags -- Part 2: Requirements and test methods |
| 28 | ISO 8670.3-2000 | 造口术收集袋第3部分:结肠造口术和回肠造口术收集袋的气味传递测定 Ostomy collection bags -- Part 3: Determination of odour transmission of colostomy and ileostomy bags |
| 29 | ISO 8672-1993 | 空气质量用相差光学显微镜测定空气中无机纤维浓度值膜滤法 Air quality -- Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy -- Membrane filter method |
| 30 | ISO 8673-1999 | 1型六角螺母米制细牙螺纹产品等级A级和B级 Hexagon nuts style 1 with metric fine pitch thread -- Product grades A and B |
| 31 | ISO 8674-1999 | 2型六角螺母米制细牙螺纹产品等级A级和B级 Hexagon nuts style 2 with metric fine pitch thread -- Product grades A and B |
| 32 | ISO 8662.8-1997 | 便携式手提动力工具手柄振动测量第8部分:抛光和旋转轨道和随机轨道砂轮机 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 8: Polishers and rotary orbital and random orbital sanders |
| 33 | ISO 8662.9-1996 | 便携式手提动力工具手柄振动的测量第9部分:夯实机 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 9: Rammers |
| 34 | ISO 8665-1994 | 小艇船用主机和系统功率测定和报告书 Small craft -- Marine propulsion engines and systems -- Power measurements and declarations |
| 35 | ISO 8667-1992 | 营运车辆和公共汽车十字齿形齿轮箱法兰T型 Commercial vehicles and buses; cross-tooth gearbox flanges; type TISO 8667-1992 |
| 36 | ISO 8668.1-1986 | 飞机机场联络系统连接点装置第1部分:特性 Aircraft -- Terminal junction systems -- Part 1: Characteristics |
| 37 | ISO 8668.2-1986 | 飞机机场联络系统连接点装置第2部分:试验 Aircraft -- Terminal junction systems -- Part 2: Tests |
| 38 | ISO 8668.3-1994 | 飞行器终端连接系统第4部分:1型系统的详细规范 Aircraft -- Terminal junction systems -- Part 3: Detail specification for type 1 system |
| 39 | ISO 8668.4-1993 | 飞机终端连接系统第4部分:2型系统的详细规范 Aircraft -- Terminal junction systems -- Part 4: Detail specification for type 2 system |
| 40 | ISO 8666-2002 | 小艇主要数据 Small craft -- Principal data |
| 41 | ISO 8664-2005 | 农业拖拉机驱动轮轮胎标有工作描述(页荷指数一速度符号)的轮胎 Tyres for agricultural tractors and machines -- Code-designated and service-description marked radial drive-wheel tyres |
| 42 | ISO 8662.3-1999 | 便携式手提动力工具手柄振动的测量第3部分:岩石钻头和旋转锤 Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 3: Rock Drills and Rotary Hammers Amendment 1 10-15-1999 |
| 43 | ISO 8662-4 | 便携式手提动力工具手柄振动的测量第4部分:磨床 (Pending)Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 4: Grinders Second Edition |
| 44 | ISO 8662.4-1994 | 便携式手提动力工具手柄振动的测量第4部分:磨床 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 4: Grinders |
| 45 | ISO 8662.5-1992 | 便携式手提动力工具手柄振动的测量第5部分:施工用路面轧碎机和锤 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 5: Pavement breakers and hammers for construction work |
| 46 | ISO 8662.6-1994 | 便携式手提动力工具手柄振动的测量第6部分:冲击式钻机 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 6: Impact drills |
| 47 | ISO 8662.7-1997 | 便携式手提动力工具手柄振动测量第7部分:扳手旋具与具有冲击冲力和刻踞齿作用的螺纹滚子 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 7: Wrenches screwdrivers and nut runners with impact impulse or ratchet action |
| 48 | ISO 8662.5 AMD 1-1999 | 便携式手提动力工具手柄振动的测量第5部分:施工用路面轧碎机和锤补充件1 Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work; Amendment 1 |
| 49 | ISO 8662.3-1992 | 便携式手提动力工具手柄振动的测量第3部分:岩石钻头和旋转锤 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 3: Rock drills and rotary hammers |
| 50 | ISO 8662.1-1988 | 便携式手提动力工具手柄振动测量第1部分:通则 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 1: General |
| 51 | ISO 8662.12-1997 | 便携式手提动力工具手柄振动测量第12部分:有往复作用的锯和锉和有摆动或旋转作用的锯 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action |
| 52 | ISO 8662.13-1997 | 便携式手提动力工具手柄振动测量第13部分:模具研磨机 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 13: Die grinders |
| 53 | ISO 8662.14-1996 | 便携式手提动力工具手柄振动的测量第14部分:石工用工具和针束除锈机 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 14: Stone-working tools and needle scalers |
| 54 | ISO 8662.2-1992 | 便携式手提动力工具手柄振动的测量第2部分:凿锤和铆钉锤 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 2: Chipping hammers and riveting hammers |
| 55 | ISO 8662.13 Technical Corrigendum 1-1998 | 便携式手提动力工具手柄振动测量第13部分:模具研磨机技术勘误1 Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders; Technical Corrigendum 1 |
| 56 | ISO 8662.2 AMD 1-1999 | 便携式手提动力工具手柄振动的测量第2部分:凿锤和铆钉锤修改件1 Hand-held portable power tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers; Amendment 1 |
| 57 | ISO 8662.3 AMD 1-1999 | 便携式手提动力工具手柄振动的测量 第3部分:岩石钻头和旋转锤修改件1 Hand-held portable power tools - Measurement of vibrations at the handle - Part 3: Rock drills and rotary hammers; Amendment 1 |
| 58 | ISO 8656.1-1988 | 耐火材料制品原料及未成型产品的取样第1部分:取样方案 Refractory products -- Sampling of raw materials and unshaped products -- Part 1: Sampling scheme |
| 59 | ISO 8658-1997 | 铝制品用碳质材料未烧结的和煅烧的焦炭火焰原子吸收光谱法测定痕量元素 Carbonaceous materials for use in the production of aluminium -- Green and calcined coke -- Determination of trace elements by flame atomic absorption spectrometry |
| 60 | ISO 8659-1989 | 热塑塑料阀门疲劳强度试验方法 Thermoplastics valves -- Fatigue strength -- Test method |
| 61 | ISO 8660-2002 | 塑料己内酰胺的高锰酸盐吸收指数的侧定光谱分析法 Plastics -- Determination of permanganate absorption number of caprolactam -- Spectrometric method |
| 62 | ISO 8661-1988 | 工业用己内酰胺挥发物含量的测定蒸馏后滴定法 Caprolactam for industrial use -- Determination of volatile bases content -- Titrimetric method after distillation |
| 63 | ISO 866-1975 | A型无保护槽中心孔的中心钻 Centre drills for centre holes without protecting chamfers -- Type A |
| 64 | ISO 8662.10-1998 | 便携式手提动力工具手柄振动测量第10部分:步冲轮廓机和剪切机械 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 10: Nibblers and shears |
| 65 | ISO 8662.11-1999 | 便携式手提动力工具手柄振动测量第11部分:螺丝紧固器 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 11: Fastener driving tools |
| 66 | ISO 8662.11 AMD 1-2001 | 便携式手提动力工具手柄振动测量第11部分:紧固器修改件1 Hand-held portable power tools - Measurement of vibrations at the handle - Part 11: Fastener driving tools; Amendment 1 |
| 67 | ISO 865-1981 | 凸焊机面的槽 Slots in platens for projection welding machines |
| 68 | ISO 8652-1995 | 信息技术程序设计语言Ada语言 Information Technology - Programming Languages - Ada Technical Corrigendum 1:06/01/2001 |
| 69 | ISO 8653-1986 | 珠宝戒指尺寸定义、测量和名称与符号 Jewellery -- Ring-sizes -- Definition measurement and designation |
| 70 | ISO 8654-1987 | 金合金的颜色颜色的定义、范围和名称与符号 Colours of gold alloys -- Definition range of colours and designation |
| 71 | ISO 8655.1-2002 | 活塞式容量测量仪器第1部分:术语、一般要求和用户使用建议 Piston-operated volumetric apparatus -- Part 1: Terminology general requirements and user recommendations |
| 72 | ISO 8655.2-2002 | 活塞式容量测量仪器第2部分:活塞式吸量管 Piston-operated volumetric apparatus -- Part 2: Piston pipettes |
| 73 | ISO 8655.3-2002 | 活塞式容量测量仪器第3部分:活塞式玻璃量管 Piston-operated volumetric apparatus -- Part 3: Piston burettes |
| 74 | ISO 8655.4-2002 | 活塞式容量测量仪器第4部分:稀释器 Piston-operated volumetric apparatus -- Part 4: Dilutors |
| 75 | ISO 8655.5-2002 | 活塞式容量测量仪器第5部分:分配器 Piston-operated volumetric apparatus -- Part 5: Dispensers |
| 76 | ISO 8655.6-2002 | 活塞式容量测量仪器第6部分:确定测量误差的重量分析法 Piston-operated volumetric apparatus -- Part 6: Gravimetric methods for the determination of measurement error |
| 77 | ISO 8648-1988 | 信息处理系统开式系统互连网络层的内部结构 Information processing systems -- Open Systems Interconnection -- Internal organization of the Network Layer |
| 78 | ISO 8651.1-1988 | 信息处理系统计算机制图图形核心系统(GKS)的语言汇编第1部分:FORTRAN语言 Information processing systems -- Computer graphics -- Graphical Kernel System (GKS) language bindings -- Part 1: FORTRAN |
| 79 | ISO 8651.2-1988 | 信息处理系统计算机制图图形核心系统(GKS)的语言汇编第2部分:Pascal语言 Information processing systems -- Computer graphics -- Graphical Kernel System (GKS) language bindings -- Part 2: Pascal |
| 80 | ISO 8651.3-1988 | 信息处理系统计算机制图图形核心系统(GKS)的语言汇篇第3部分:Ada语言 Information processing systems -- Computer graphics -- Graphical Kernel System (GKS) language bindings -- Part 3: Ada |
| 81 | ISO 8651.4-1995 | 信息技术计算机制图图形核心系统(GKS)语言汇编第4部分:C语言 Information Technology - Computer Graphics - Graphical Kernel System (GKS) Language Bindings - Part 4: C Second Edition |
| 82 | ISO 8649-1996 | Information Technology - Open Systems Interconnection - Service Definition for the Association Control Service Element Second Edition; Amendment 1-1997; Amendment 2-1998 |
| 83 | ISO 8650.2-1997 | Information Technology - Open Systems Interconnection - Protocol Specification for the Association Control Service Element: Protocol Implementation Conformance Statement (PICS) Proforma Second Edition |
| 84 | ISO 8648 Technical Corrigendum 1-1991 | 信息处理系统开放系统互连网络层的内部结构技术勘误表1 Information processing systems; Open Systems Interconnection; internal organization of the network layer; technical corrigendum 1 |
| 85 | ISO 8650.1-1996 | Information Technology - Open Systems Interconnection - Connection-Oriented Protocol for the Association Control Service Element: Protocol Specification Second Edition; Amendment 1-1997; Amendment 2-1998 |
| 86 | ISO 8640.3-2002 | 纺织机械和附件平经针织机词汇第3部分:制模器械的词汇 Textile machinery and accessories -- Flat warp knitting machines -- Part 3: Vocabulary of patterning devices |
| 87 | ISO 8640.4-1996 | 纺织机械和附件平经针织机词汇第4部分:缝编机械及设备 Textile machinery and accessories -- Flat warp knitting machines -- Vocabulary -- Part 4: Stitch bonding machines and stitch bonding devices |
| 88 | ISO 8641-1987 | 航空航天最高工作温度大于425℃的自锁螺母采购规范 Aerospace -- Self-locking nuts with maximum operating temperature greater than 425 degrees C -- Procurement specification |
| 89 | ISO 864-1988 | 低碳钢保护金属电弧焊用焊丝焊丝焊丝卷盘卷盘套及卷芯的尺寸 Arc Welding - Solid and Tubular Cored Wires Which Deposit Carbon and Carbon Manganese Steel - Dimensions of Wires Spools Rims and Coils Second Edition |
| 90 | ISO 8642-1986 | 航空航天最高工作温度大于425℃的自锁螺母试验方法 Aerospace -- Self-locking nuts with maximum operating temperature greater than 425 degrees C -- Test methods |
| 91 | ISO 8643-1997 | 土方机械液压挖掘机和反铲装载机悬臂降低控制装置要求和试验 Earth-moving machinery -- Hydraulic excavator and backhoe loader boom-lowering control device -- Requirements and tests |
| 92 | ISO 8644-1988 | 摩托车轻合金车轮试验方法 Motorcycles -- Light-alloy wheels -- Test method |
| 93 | ISO 8645-1988 | 机动脚踏两用车轻合金轮试验方法 Mopeds -- Light-alloy wheels -- Test method |
| 94 | ISO 8640.1-2004 | 纺织机械和附件平经针织机词汇第1部分:传动机构、支持和编织机件 Textile machinery and accessories -- Flat warp knitting machines -- Part 1: Vocabulary of basic structure and knitting elements |
| 95 | ISO 8640.2-2004 | 纺织机械和附件平经针织机词汇第2部分:送经、织物卷取和卷布 Textile machinery and accessories -- Flat warp knitting machines -- Part 2: Vocabulary of warp let-off fabric take-up and batching |
| 96 | ISO 8632.3-1999 | 信息技术计算机制图画面描述信息的存储与传递用MATA文档第3部分:二进制编码 Information Technology - Computer Graphics - Metafile for the Storage and Transfer of Picture Description Information - Part 3: Binary Encoding Second Edition |
| 97 | ISO 8632.4-1999 | 信息技术计算机制图画面描述信息的存储与传递用MATA文档第4部分:明码通信报文编码 Information Technology - Computer Graphics - Metafile for the Storage and Transfer of Picture Description Information - Part 4: Clear Text Encoding Second Edition |
| 98 | ISO 8634-1991 | 固体肥料鉴定大宗交货的取样方案 Solid fertilizers -- Sampling plan for the evaluation of a large delivery |
| 99 | ISO 8636.1-2000 | 机床工具桥型磨床的试验条件精度试验第1部分:固定桥(门架形)机器 Machine tools -- Test conditions for bridge-type milling machines -- Testing of the accuracy -- Part 1: Fixed bridge (portal-type) machines |
| 100 | ISO 8636.2-1988 | 龙铣床的验收条件精度检验第2部分:龙门机床 Acceptance conditions for plano-milling machines -- Testing of the accuracy -- Part 2: Gantry-type machines |