| 序号 | 标准号 | 标准名称 |
 1 | ISO 9054-1990 | 泡沫塑料自结皮高密度材料的试验方法 Cellular plastics rigid -- Test methods for self-skinned high-density materials |
| 2 | ISO 9055-1988 | 炼铝用碳素材料电极沥青用氧弹法测定硫含量 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of sulfur content by the bomb method |
| 3 | ISO 9056-1990 | 玻璃容器防偷窃精加工系列尺寸 Glass containers -- Series of pilferproof finish -- Dimensions |
| 4 | ISO 9057-1991 | 玻璃容器加压液体用28mm瓶口尺寸 Glass containers -- 28 mm tamper-evident finish for pressurized liquids -- Dimensions |
| 5 | ISO 9058-1992 | 玻璃容器公差 Glass containers -- Tolerances |
| 6 | ISO 9059-1990 | 太阳能与基准太阳热量计比对野外太阳热量计 Solar energy -- Calibration of field pyrheliometers by comparison to a reference pyrheliometer |
| 7 | ISO 9050-2003 | 建筑用玻璃玻璃透光性的测定透阳光性太阳能透过度以及紫外线透过度的测定和有关上光模 Glass in building -- Determination of light transmittance solar direct transmittance total solar energy transmittance ultraviolet transmittance and related glazing factors |
| 8 | ISO 904-1976 | 工业用盐酸总酸度的测定滴定法 Hydrochloric acid for industrial use -- Determination of total acidity -- Titrimetric method |
| 9 | ISO 9042-1988 | 钢人工点计数用点格统计评定组成的体积百分率 Steels -- Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid |
| 10 | ISO 9043-1991 | 机动脚踏两用车惯性矩测量方法 Mopeds -- Measurement method for moments of inertia |
| 11 | ISO 9044-1999 | 工业用金属丝织物技术要求和试验 Industrial woven wire cloth -- Requirements and tests |
| 12 | ISO 9045-1990 | 工业用网筛和筛分词汇 Industrial screens and screening -- Vocabulary |
| 13 | ISO 9046-2002 | 建筑结构密封料恒温下的粘合/附着性能的测定 Building construction -- Jointing products -- Determination of adhesion/cohesion properties of sealants at constant temperature |
| 14 | ISO 9047-2001 | 房屋建筑连接件变温下的密封胶粘合性能的测定 Building construction -- Jointing products -- Determination of adhesion/cohesion properties of sealants at variable temperatures |
| 15 | ISO 9048-1987 | 建筑结构连接件使用标准化仪器测定密封料可挤压性 Building construction -- Jointing products -- Determination of extrudability of sealants using standardized apparatus |
| 16 | ISO 9041.1-1997 | Information Technology - Open Systems Interconnection - Virtual Terminal Basic Class Protocol - Part 1: Specification Second Edition |
| 17 | ISO 9041.2-1997 | Information Technology - Open Systems Interconnection - Virtual Terminal Basic Class Protocol - Part 2: Protocol Implementation Conformance Statement (PICS) Proforma Second Edition |
| 18 | ISO 903-1976 | 金属铝生产用氧化铝未夯实密度的测定 Aluminium oxide primarily used for the production of aluminium -- Determination of untamped density |
| 19 | ISO 90.3-2000 | 轻型金属容器定义和尺寸、容量的测定第3部分:气溶胶罐 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 3: Aerosol cans |
| 20 | ISO 9033-1989 | 铝矿石散料含水量的测定 Aluminium ores -- Determination of the moisture content of bulk material |
| 21 | ISO 9034-1987 | 热轧宽扁结构钢尺寸和形状公差 Hot-rolled structural steel wide flats -- Tolerances on dimensions and shape |
| 22 | ISO 9035-1989 | 铁矿石酸溶铁含量的测定滴定分析法 Iron ores -- Determination of acid-soluble iron(II) content -- Titrimetric method |
| 23 | ISO 9036-1987 | 信息处理信息交换用的7位编码阿拉伯字符集 Information processing -- Arabic 7-bit coded character set for information interchange |
| 24 | ISO 9039-1994 | 光学及光学仪器光学系统的质量评定挠曲测定 Optics and optical instruments -- Quality evaluation of optical systems -- Determination of distortion |
| 25 | ISO 9040-1997 | Information Technology - Open Systems Interconnection - Virtual Terminal Basic Class Service Second Edition |
| 26 | ISO 9038-2002 | 液体持续可燃性的试验 Test for sustained combustibility of liquids |
| 27 | ISO 9022.7-1994 | 光学和光学仪器环境试验方法第7部分:降雨 Optics and optical instruments -- Environmental test methods -- Part 7: Drip rain |
| 28 | ISO 9022.8-1994 | 光学和光学仪器环境试验方法第8部分:高压、低压及浸渍 Optics and optical instruments -- Environmental test methods -- Part 8: High pressure low pressure immersion |
| 29 | ISO 9022.9-1994 | 光学和光学仪器环境试验方法第9部分:太阳辐射 Optics and optical instruments -- Environmental test methods -- Part 9: Solar radiation |
| 30 | ISO 9026-1991 | 粗橡胶或硫化化合物生坯强度测定 Raw rubber or unvulcanized compounds -- Determination of green strength |
| 31 | ISO 9028-1989 | 橡胶用酸煮法溶解 Rubber -- Dissolution by acid digestion |
| 32 | ISO 9029-1990 | 原油水分测定蒸馏法 Crude petroleum -- Determination of water -- Distillation method |
| 33 | ISO 9030-1990 | 原油水分和沉淀物测定离心法 Crude petroleum -- Determination of water and sediment -- Centrifuge method |
| 34 | ISO 9031-1987 | 空中货运设备成组货件(ULD S)的运输系统用图形表示的符号 Air cargo equipment -- Handling systems for unit load devices (ULDs) -- Symbols for pictorial representation |
| 35 | ISO 9022.7 Technical Corrigendum 1-2001 | 光学和光学仪器环境试验方法第7部分:降雨技术勘误1 Optics and optical instruments - Environmental test method - Part 7: Drip rain; Technical Corrigendum 1 |
| 36 | ISO 9022.17-1994 | 光学和光学仪器环境试验方法第17部分:太阳辐射混合污染 Optics and Optical Instruments - Environmental Test Methods - Part 17: Combined Contamination Solar Radiation First Edition |
| 37 | ISO 9022.18-1994 | 光学和光学仪器环境试验方法第18部分:混合湿热及低内压力 Optics and optical instruments -- Environmental test methods -- Part 18: Combined damp heat and low internal pressure |
| 38 | ISO 9022.19-1994 | 光学和光学仪器环境试验方法第19部分:与正弦波振动或随机振动组合的温度循环 Optics and optical instruments -- Environmental test methods -- Part 19: Temperature cycles combined with sinusoidal or random vibration |
| 39 | ISO 9022.20-1997 | 光学和光学仪器环境试验方法第20部分:含有硫化氢或二氧化硫的湿空气 Optics and optical instruments -- Environmental test methods -- Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide |
| 40 | ISO 9022.21-1998 | 光学和光学仪器环境试验方法第21部分:组合低压和室温或干热 Optics and optical instruments -- Environmental test methods -- Part 21: Combined low pressure and ambient temperature or dry heat |
| 41 | ISO 9022.3-1998 | 光学和光学仪器环境试验方法第3部分:机械应力 Optics and optical instruments -- Environmental test methods -- Part 3: Mechanical stress |
| 42 | ISO 9022.5-1994 | 光学和光学仪器环境试验方法第5部分:组合冷、低压 Optics and optical instruments -- Environmental test methods -- Part 5: Combined cold low air pressure |
| 43 | ISO 9022.6-1994 | 光学和光学仪器环境试验方法第6部分:尘埃 Optics and optical instruments -- Environmental test methods -- Part 6: Dust |
| 44 | ISO 9022.4-2002 | 光学和光学仪器环境试验方法第4部分:盐雾 Optics and optical instruments -- Environmental test methods -- Part 4: Salt mist |
| 45 | ISO 9022.2-2002 | 光学和光学仪器环境试验方法第2部分:冷、热和潮气 Optics and optical instruments -- Environmental test methods -- Part 2: Cold heat and humidity |
| 46 | ISO 902-1976 | 金属铝生产用氧化铝休止角的测定 Aluminium oxide primarily used for the production of aluminium -- Measurement of the angle of repose |
| 47 | ISO 90.2-1997 | 薄金属容器定义和尺寸、容量的测定第2部分:普通集装箱 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 2: General use containers |
| 48 | ISO 9022.10-1998 | 光学和光学仪器环境试验方法第10部分:复正弦波振动与干热或干冷 Optics and optical instruments -- Environmental test methods -- Part 10: Combined sinusoidal vibration and dry heat or cold |
| 49 | ISO 9022.11-1994 | 光学和光学仪器环境试验方法第11部分:霉菌生长 Optics and optical instruments -- Environmental test methods -- Part 11: Mould growth |
| 50 | ISO 9022.1-1994 | 光学和光学仪器环境试验方法第1部分:试验的范围及定义 Optics and optical instruments -- Environmental test methods -- Part 1: Definitions extent of testing |
| 51 | ISO 9022.12-1994 | 光学和光学仪器环境试验方法第12部分:污染 Optics and optical instruments -- Environmental test methods -- Part 12: Contamination |
| 52 | ISO 9022.13-1998 | 光学和光学仪器环境试验方法第13部分:组合冲击、碰撞或自由降落与干热或干冷 Optics and optical instruments -- Environmental test methods -- Part 13: Combined shock bump or free fall and dry heat or cold |
| 53 | ISO 9022.14-1994 | 光学和光学仪器环境试验方法第14部分:露水、霜及冰 Optics and optical instruments -- Environmental test methods -- Part 14: Dew hoarfrost ice |
| 54 | ISO 9022.15-1998 | 光学和光学仪器环境试验方法第15部分:复合数控宽频随机振动与干热或干冷 Optics and optical instruments -- Environmental test methods -- Part 15: Combined digitally controlled broad-band random vibration and dry heat or cold |
| 55 | ISO 9022.16-1998 | 光学和光学仪器环境试验方法第16部分:组合振动或稳定状态的加速度与干热或干冷 Optics and optical instruments -- Environmental test methods -- Part 16: Combined bounce or steady-state acceleration and dry heat or cold |
| 56 | ISO 9012-1998 | 气焊设备吸气式手持喷焊枪规范和试验 Gas welding equipment -- Air-aspirated hand blowpipes -- Specifications and tests |
| 57 | ISO 9015.1-2001 | 金属材料焊接的破坏试验硬度试验第1部分:电弧焊接头硬度试验 Destructive tests on welds in metallic materials -- Hardness testing -- Part 1: Hardness test on arc welded joints |
| 58 | ISO 9016-2001 | 金属材料焊接的破坏试验冲击试验试样定位、切口定向和检查 Destructive tests on welds in metallic materials -- Impact tests -- Test specimen location notch orientation and examination |
| 59 | ISO 9017-2001 | 金属材料焊接中的破坏试验裂缝试验 Destructive tests on welds in metallic materials -- Fracture test |
| 60 | ISO 9019-1995 | 证券证书编号 Securities -- Numbering of certificates |
| 61 | ISO 9021-1988 | 摩托车操纵机构型式位置和功能 Motorcycles -- Controls -- Types positions and functions |
| 62 | ISO 9020 Technical Corrigendum 1-1996 | 色漆和清漆用粘合剂胺类树脂的自由甲醛含量的测定技术勘误表1 Binders for paints and varnishes - Determination of free-formaldehyde content of amino resins - Sodium sulfite titrimetric method; Technical Corrigendum 1 |
| 63 | ISO 9013-2002 | 热切割热切割分类产品几何量技术规范和质量公差 Thermal cutting -- Classification of thermal cuts -- Geometrical product specification and quality tolerances |
| 64 | ISO 9015.2-2003 | 金属材料焊接的破坏性测试 硬度测试 第2部分：焊接接头的显微硬度的试验 Destructive tests on welds in metallic materials -- Hardness testing -- Part 2: Microhardness testing of welded joints |
| 65 | ISO 9018-2003 | 金属材料焊接的破坏性试验 十字接头和搭接接头的拉伸试验 Destructive tests on welds in metallic materials -- Tensile test on cruciform and lapped joints |
| 66 | ISO 9005-1994 | 二氧化铀粉末和二氧化铀烧结丸氧和铀的原子系数的测定电流测量法 Uranium dioxide powder and sintered pellets -- Determination of oxygen/uranium atomic ratio -- Amperometric method |
| 67 | ISO 9006-1994 | 铀和二氧化铀粉末和丸状二氧化铀氮含量测定敏感电极使用方法 Uranium metal and uranium dioxide powder and pellets -- Determination of nitrogen content -- Method using ammonia-sensing electrode |
| 68 | ISO 9008-1991 | 玻璃瓶垂直度试验方法 Glass bottles -- Verticality -- Test method |
| 69 | ISO 9009-1991 | 玻璃容器以容器底作基准的瓶口高度和不平行性试验方法 Glass containers -- Height and non-parallelism of finish with reference to container base -- Test methods |
| 70 | ISO 9010-1997 | 同步皮带驱动汽车用皮带 Synchronous belt drives -- Automotive belts |
| 71 | ISO 9011-1997 | 同步皮带驱动汽车皮带轮 Synchronous belt drives -- Automotive pulleys |
| 72 | ISO 901-1976 | 金属铝生产用氧化铝绝对密度的测定比重计法 Aluminium oxide primarily used for the production of aluminium -- Determination of absolute density -- Pyknometer method |
| 73 | ISO 90.1-1997 | 薄金属容器定义和尺寸、容量的测定第1部分:顶开口罐 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 1: Open-top cans |
| 74 | ISO 9004.4 Technical Corrigendum 1-1994 | 质量管理和质量体系单元第4部分:质量改进导则技术勘误表1 Quality management and quality system elements - Part 4: Guidelines for quality improvement; Technical Corrigendum 1 |
| 75 | ISO 9007-1987 | 信息处理系统概念模式和信息基数的概念和术语 Information processing systems; Concepts and terminology for the conceptual schema and the information base |
| 76 | ISO 8999-2001 | 往复式内燃机图形符号 Reciprocating internal combustion engines -- Graphical symbols |
| 77 | ISO 9000-2000 | 质量管理体系基础及词汇 Quality management systems -- Fundamentals and vocabulary |
| 78 | ISO 9001-2000 | 质量管理体系 要求 Quality management systems -- Requirements |
| 79 | ISO 900-1977 | 金属铝生产用氧化铝钛含量的测定二安替比林基代甲烷光度法 Aluminium oxide primarily used for the production of aluminium -- Determination of titanium content -- Diantipyrylmethane photometric method |
| 80 | ISO 9004-2000 | 质量管理体系业绩改进指南 Quality management systems -- Guidelines for performance improvements |
| 81 | ISO 9000 CD-2001 | ISO 9000: ISO STANDARDS COLLECTION ON CD-ROM - QUALITY MANAGEMENT SEE ALSO ISO 14000 CD |
| 82 | ISO 9000 COLLECTION 1-2000 | ISO 9000 COLLECTION 1 INCLUDES THE 2000 REVISIONS OF ISO 9000 ISO 9001 AND ISO 9004 |
| 83 | ISO 9000 COLLECTION 2-2002 | ISO 9000 COLLECTION 2 INCLUDES ISO 9000 SERIES DOCUMENTS |
| 84 | ISO 9000 COMPENDIUM-2003 | INTERNATIONAL STANDARDS FOR QUALITY MANAGEMENT 10th Edition |
| 85 | ISO 90003-2004 | Software engineering Guidelines for the application of ISO 9001:2000 to computer software First Edition |
| 86 | ISO 8913-1994 | 航空航天标准重量以下的四氧乙烯(PTFE)软管装置21000KPa/204℃类采购规范 Aerospace -- Lightweight polytetrafluoroethylene (PTFE) hose assemblies classification 204 degrees C/21 000 kPa -- Procurement specification |
| 87 | ISO 8914-1990 | 微生物学副血溶解弧菌检验的一般导则 Microbiology -- General guidance for the detection of Vibrio parahaemolyticus |
| 88 | ISO 8918-1996 | 萤石技术等级化学成分和物理特性 Fluorspar -- Technical grades -- Chemical composition and physical characteristics |
| 89 | ISO 8925-1989 | 土方机械检查孔 Earth-moving machinery -- Diagnostic port |
| 90 | ISO 8927-1991 | 土方机械机器的可用性词汇 Earth-moving machinery -- Machine availability -- Vocabulary |
| 91 | ISO 8930-1987 | 结构可靠性的一般原则等义术语表三种语言版 General principles on reliability for structures -- List of equivalent terms |
| 92 | ISO 893-1989 | 表面活性剂工业用链烷磺酸钠分析方法 Surface active agents -- Technical alkane sulfonates -- Methods of analysis |
| 93 | ISO 8935-1990 | 农业和林业拖拉机外部设备控制器的安装座和开口 Tractors for agriculture and forestry -- Mountings and apertures for external equipment controls |
| 94 | ISO 8925 AMD 1-1997 | 土方机械检查孔修订件1 Earth-moving machinery - Diagnostic ports; Amendment 1 |
| 95 | ISO 8903-1994 | 阔叶树锯材的公称尺寸 Broadleaved sawn timber -- Nominal sizes |
| 96 | ISO 8904-1990 | 阔叶树锯材尺寸测量方法 Broadleaved sawn timber -- Sizes -- Methods of measurement |
| 97 | ISO 8905-1988 | 锯材试验方法与纹理平行剪切极限强度的测定 Sawn timber -- Test methods -- Determination of ultimate strength in shearing parallel to grain |
| 98 | ISO 8906-1988 | 锯材试验方法抗局部横向压缩的测定 Sawn timber -- Test methods -- Determination of resistance to local transverse compression |
| 99 | ISO 8909.1-1994 | 饲料作物收获机第1部分:词汇 Forage harvesters -- Part 1: Vocabulary |
| 100 | ISO 8909.2-1994 | 饲料作物收获机第2部分:特性规范 Forage harvesters -- Part 2: Specification of characteristics and performance |