| 序号 | 标准号 | 标准名称 |
 1 | ISO 9006-1994 | 铀和二氧化铀粉末和丸状二氧化铀氮含量测定敏感电极使用方法 Uranium metal and uranium dioxide powder and pellets -- Determination of nitrogen content -- Method using ammonia-sensing electrode |
| 2 | ISO 9008-1991 | 玻璃瓶垂直度试验方法 Glass bottles -- Verticality -- Test method |
| 3 | ISO 9009-1991 | 玻璃容器以容器底作基准的瓶口高度和不平行性试验方法 Glass containers -- Height and non-parallelism of finish with reference to container base -- Test methods |
| 4 | ISO 9010-1997 | 同步皮带驱动汽车用皮带 Synchronous belt drives -- Automotive belts |
| 5 | ISO 9011-1997 | 同步皮带驱动汽车皮带轮 Synchronous belt drives -- Automotive pulleys |
| 6 | ISO 901-1976 | 金属铝生产用氧化铝绝对密度的测定比重计法 Aluminium oxide primarily used for the production of aluminium -- Determination of absolute density -- Pyknometer method |
| 7 | ISO 90.1-1997 | 薄金属容器定义和尺寸、容量的测定第1部分:顶开口罐 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 1: Open-top cans |
| 8 | ISO 9004.4 Technical Corrigendum 1-1994 | 质量管理和质量体系单元第4部分:质量改进导则技术勘误表1 Quality management and quality system elements - Part 4: Guidelines for quality improvement; Technical Corrigendum 1 |
| 9 | ISO 9007-1987 | 信息处理系统概念模式和信息基数的概念和术语 Information processing systems; Concepts and terminology for the conceptual schema and the information base |
| 10 | ISO 8999-2001 | 往复式内燃机图形符号 Reciprocating internal combustion engines -- Graphical symbols |
| 11 | ISO 9000-2000 | 质量管理体系基础及词汇 Quality management systems -- Fundamentals and vocabulary |
| 12 | ISO 9001-2000 | 质量管理体系 要求 Quality management systems -- Requirements |
| 13 | ISO 900-1977 | 金属铝生产用氧化铝钛含量的测定二安替比林基代甲烷光度法 Aluminium oxide primarily used for the production of aluminium -- Determination of titanium content -- Diantipyrylmethane photometric method |
| 14 | ISO 9004-2000 | 质量管理体系业绩改进指南 Quality management systems -- Guidelines for performance improvements |
| 15 | ISO 9000 CD-2001 | ISO 9000: ISO STANDARDS COLLECTION ON CD-ROM - QUALITY MANAGEMENT SEE ALSO ISO 14000 CD |
| 16 | ISO 9000 COLLECTION 1-2000 | ISO 9000 COLLECTION 1 INCLUDES THE 2000 REVISIONS OF ISO 9000 ISO 9001 AND ISO 9004 |
| 17 | ISO 9000 COLLECTION 2-2002 | ISO 9000 COLLECTION 2 INCLUDES ISO 9000 SERIES DOCUMENTS |
| 18 | ISO 9000 COMPENDIUM-2003 | INTERNATIONAL STANDARDS FOR QUALITY MANAGEMENT 10th Edition |
| 19 | ISO 90003-2004 | Software engineering Guidelines for the application of ISO 9001:2000 to computer software First Edition |
| 20 | ISO 8913-1994 | 航空航天标准重量以下的四氧乙烯(PTFE)软管装置21000KPa/204℃类采购规范 Aerospace -- Lightweight polytetrafluoroethylene (PTFE) hose assemblies classification 204 degrees C/21 000 kPa -- Procurement specification |
| 21 | ISO 8914-1990 | 微生物学副血溶解弧菌检验的一般导则 Microbiology -- General guidance for the detection of Vibrio parahaemolyticus |
| 22 | ISO 8918-1996 | 萤石技术等级化学成分和物理特性 Fluorspar -- Technical grades -- Chemical composition and physical characteristics |
| 23 | ISO 8925-1989 | 土方机械检查孔 Earth-moving machinery -- Diagnostic port |
| 24 | ISO 8927-1991 | 土方机械机器的可用性词汇 Earth-moving machinery -- Machine availability -- Vocabulary |
| 25 | ISO 8930-1987 | 结构可靠性的一般原则等义术语表三种语言版 General principles on reliability for structures -- List of equivalent terms |
| 26 | ISO 893-1989 | 表面活性剂工业用链烷磺酸钠分析方法 Surface active agents -- Technical alkane sulfonates -- Methods of analysis |
| 27 | ISO 8935-1990 | 农业和林业拖拉机外部设备控制器的安装座和开口 Tractors for agriculture and forestry -- Mountings and apertures for external equipment controls |
| 28 | ISO 8925 AMD 1-1997 | 土方机械检查孔修订件1 Earth-moving machinery - Diagnostic ports; Amendment 1 |
| 29 | ISO 8903-1994 | 阔叶树锯材的公称尺寸 Broadleaved sawn timber -- Nominal sizes |
| 30 | ISO 8904-1990 | 阔叶树锯材尺寸测量方法 Broadleaved sawn timber -- Sizes -- Methods of measurement |
| 31 | ISO 8905-1988 | 锯材试验方法与纹理平行剪切极限强度的测定 Sawn timber -- Test methods -- Determination of ultimate strength in shearing parallel to grain |
| 32 | ISO 8906-1988 | 锯材试验方法抗局部横向压缩的测定 Sawn timber -- Test methods -- Determination of resistance to local transverse compression |
| 33 | ISO 8909.1-1994 | 饲料作物收获机第1部分:词汇 Forage harvesters -- Part 1: Vocabulary |
| 34 | ISO 8909.2-1994 | 饲料作物收获机第2部分:特性规范 Forage harvesters -- Part 2: Specification of characteristics and performance |
| 35 | ISO 8909.3-1994 | 饲料作物收获机第3部分:试验方法 Forage harvesters -- Part 3: Test methods |
| 36 | ISO 8910-1993 | 土壤耕作机械和设备有壁犁耕作部件词汇 Machinery and equipment for working the soil -- Mouldboard plough working elements -- Vocabulary |
| 37 | ISO 8912-1986 | 耕作土壤的设备压辊截面连接器和截面宽度 Equipment for working the soil -- Roller sections -- Coupling and section width |
| 38 | ISO 8910 DAM 1-1992 | 修改1 Machinery and equipment for working the soil; mouldboard ploughs; working elements; vocabulary; amendment 1 |
| 39 | ISO 8894.1-1987 | 耐火材料热导率的测定第1部分:热线法(交叉排列) Refractory materials -- Determination of thermal conductivity -- Part 1: Hot-wire method (cross-array) |
| 40 | ISO 8894.2-1990 | 耐火材料导热性的测定第2部分:热线法(并联法) Refractory materials -- Determination of thermal conductivity -- Part 2: Hot-wire method (parallel) |
| 41 | ISO 8896-1987 | 黄蒿油(Carum Carvl Linnaeus) Oil of caraway (Carum carvi Linnaeus) |
| 42 | ISO 8897-1991 | 刺柏油(juniperus Communis innaeus) Oil of juniper berry (Juniperus communis Linnaeus) |
| 43 | ISO 8900-1987 | 香柠檬油(Citrus avrantium(Linnaeus)sspbergamia(Wight et Arnott)Engler) Oil of bergamot petitgrain (Citrus aurantium (Linnaeus) ssp bergamia (Wight et Arnott) Engler) |
| 44 | ISO 8902-1999 | 法国型杂薰衣草油 Oil of lavandin Grosso (Lavandula angustifolia Miller x Lavandula latifolia (Lf) Medikus) French type |
| 45 | ISO 8901-2003 | 苦橙叶油(Citrus aurantium Linnaeus sspaurantium) Oil of bitter orange petitgrain cultivated (Citrus aurantium L) |
| 46 | ISO 8898-2003 | 柑橘油 Oil of mandarin petitgrain (Citrus reticulata Blanco) |
| 47 | ISO 8899-2003 | 柠檬橙叶油 Oil of lemon petitgrain [Citrus limon (L) Burm f] |
| 48 | ISO 8895-2004 | 成型的绝热耐火材料制品冷挤压强度的测定 Shaped insulating refractory products -- Determination of cold crushing strength |
| 49 | ISO 8885 DRAFT AMD 10 | 信息技术系统间电信和信息交换高级数据链路控制规程通用XID机架信息字段内容和格式 (Draft)Information Technology - Telecommunications and Information Exchange between Systems - High-Level Data Link Control (HDLC) Procedures - General Purpose XID Frame Information Field Content and Format Amendment 10: Unnumbered Information Frame with |
| 50 | ISO 8885 DRAFT AMD 11 | 信息技术系统间电信和信息交换高级数据链路控制规程通用XID机架信息字段内容和格式 (Draft)Information Technology - Telecommunications and Information Exchange between Systems - High- Level Data Link Control (HDLC) Procedures - General Purpose XID Frame Information Field Content and Format Amendment 11: Span List Encoding of the Informa |
| 51 | ISO 8886-1996 | 信息技术开放系统互连数据链接服务定义 Information Technology - Open Systems Interconnection - Data Link Service Definition Second Edition |
| 52 | ISO 8889-1988 | 铬矿石和铬精矿铝含量的测量络合滴定法 Chromium ores and concentrates -- Determination of aluminium content -- Complexometric method |
| 53 | ISO 8890-1988 | 高密度成型耐火材料制品耐硫酸的测定 Dense shaped refractory products -- Determination of resistance to sulfuric acid |
| 54 | ISO 8891-1998 | 贵金属含量至少为25%但不低于75%的牙科用铸造合金 Dental casting alloys with noble metal content of at least 25 % but less than 75 % |
| 55 | ISO 8892-1987 | 油料种子残渣己烷总残留量的测定 Oilseed residues -- Determination of total residual hexane |
| 56 | ISO 8893-1997 | 林业机械手提式刷锯发动机的性能和燃料消耗 Forestry machinery -- Portable brush-cutters and grass-trimmers -- Engine performance and fuel consumption |
| 57 | ISO 8882.2-2000 | Information Technology - Telecommunications and Information Exchange between Systems - X25 DTE Conformance Testing - Part 2: Data Link Layer Conformance Test Suite Third Edition |
| 58 | ISO 8882.3-2000 | Information Technology - Telecommunications and Information Exchange between Systems - X25 DTE Conformance Testing - Part 3: Packet Layer Conformance Test Suite Third Edition |
| 59 | ISO 8879-1986 | 信息处理文本和办公系统标准的通用置标语言(SGML) Information processing -- Text and office systems -- Standard Generalized Markup Language (SGML) |
| 60 | ISO 8881-1989 | 信息处理系统数据通信地区网络内X25包层协议的使用 Information Processing Systems - Data Communications - Use of the X25 Packet Level Protocol in Local Area Networks First Edition; Corrigendum 1-1991 |
| 61 | ISO 888-1976 | 螺栓螺钉和双头螺柱公称长度及一般用途的螺栓螺纹长度 Bolts screws and studs -- Nominal lengths and thread lengths for general purpose bolts |
| 62 | ISO 8878-1992 | Information Technology - Telecommunications and Information Exchange between Systems - Use of X25 to Provide the OSI Connection-Mode Network Service Second Edition; Corrigendum 1-1993; Corrigendum 2-1993; AS/NZS 3604: 1994; Corrigendum 3-1996; CAN/CSA-I |
| 63 | ISO 8882.1-1996 | Information Technology - Telecommunications and Information Exchange between Systems - X25 DTE Conformance Testing - Part 1: General Principles Second Edition |
| 64 | ISO 8879 AMD 1-1988 | 第1次修改 Information processing; text and office systems; standard generalized markup language (SGML); amendment 1 |
| 65 | ISO 8879 Technical Corrigendum 1-1996 | 信息处理文本和办公文件系统标准的统一加注语言(SGML)技术勘误表1 Information processing - Text and office systems - Standard Generalized Markup Language SGML; Technical Corrigendum 1 |
| 66 | ISO 887-2000 | 通用米制螺栓、螺钉和螺母用的平垫圈一般示意图 Plain washers for metric bolts screws and nuts for general purposes -- General plan |
| 67 | ISO 8873-1987 | 硬质泡沫塑料建筑物热绝缘喷涂的聚氨基甲酸乙酯泡沫塑料规范 Cellular plastics rigid -- Spray-applied polyurethane foam for thermal insulation of buildings -- Specification |
| 68 | ISO 8875-1992 | 各类萤石批含水量的测定 grades of fluorspar -- Determination of moisture content of a lot |
| 69 | ISO 8876-1989 | 荧石用筛分法测定粒度分布 Fluorspar -- Determination of particle size distribution by sieving |
| 70 | ISO 8877-1992 | 信息技术 系统间电子通信和信息交换基准点S和T的ISDN基本存取接口用插接器和接点配置 Information Technology - Telecommunications and Information Exchange between Systems - Interface Connector and Contact Assignments for ISDN Basic Access Interface Located at Reference Points S and T Second Edition; CEN EN 28877: 1993 |
| 71 | ISO 8876 Technical Corrigendum 1-1991 | 氟石用筛分法测定粒度分布技术勘误表1 Flourspar; determination of particle size distribution by sieving; technical corrigendum 1 |
| 72 | ISO 8878 ADD 2 Corrigendum 1-1991 | 信息处理系统数据通信利用X25提供开放系统互连(OSI)连接模式型网络服务修正件2:利用X25PVC提供开放系统互连连接模式网络服务技术勘误表1 Information processing systems; data communications; use of X25 to provide the OSI connection-mode network service; addendum 2: use of an X25 PVC to provide the OSI CONS; tecnical corrigendum 1 |
| 73 | ISO 8872-2003 | 输血、输液及注射瓶的铝盖－一般要求及测试方法 Aluminium caps for transfusion infusion and injection bottles -- General requirements and test methods |
| 74 | ISO 8871.3-2003 | 非肠道和制药设备用弹性件 第3部分：释放粒子数的测定 Elastomeric parts for parenterals and for devices for pharmaceutical use -- Part 3: Determination of released-particle count |
| 75 | ISO 8866-1991 | 取芯钻石钻进设备系列C Rotary core diamond drilling equipment -- System C |
| 76 | ISO 8868-1989 | 荧石抽样和样品的制备 Fluorspar -- Sampling and sample preparation |
| 77 | ISO 8868 AMD 1-1996 | 荧石抽样和样品的制备修改件1 Fluorspar - Sampling and sample preparation; Amendment 1 |
| 78 | ISO 8871 AMD 1-1995 | 含水非肠道药配制剂用弹性部件修改件1 Elastomeric parts for aqueous parenteral preparations; Amendment 1 |
| 79 | ISO 8871.1-2003 | 制药用非肠道和设备用弹性件 第1部分：液体高压消毒器可萃取物 Elastomeric parts for parenterals and for devices for pharmaceutical use -- Part 1: Extractables in aqueous autoclavates |
| 80 | ISO 8871.2-2003 | 制药用非肠道和设备用弹性件 第2部分：识别与特征 Elastomeric parts for parenterals and for devices for pharmaceutical use -- Part 2: Identification and characterization |
| 81 | ISO 8860.2-1987 | 信息处理以限定的频率7958次磁通变换/弧度在每侧80列磁道上调制录制的90mm(35in)盒式软磁盘的数据交换第2部分:磁道排列格式 Information processing -- Data interchange on 90 mm (35 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad on 80 tracks on each side -- Part 2: Track format |
| 82 | ISO 8861-1998 | 造船柴油机船的发动机室的通风设计要求和计算依据 Shipbuilding -- Engine-room ventilation in diesel-engined ships -- Design requirements and basis of calculations |
| 83 | ISO 886-1973 | 铝和铝合金锰含量的测定光度法(锰含量为000515%) Aluminium and aluminium alloys -- Determination of manganese -- Photometric method (Manganese content between 0005 and 15 %) |
| 84 | ISO 8862-1987 | 船舶机械控制室的空气调节和通风设计条件和计算基础 Air-conditioning and ventilation of machinery control-rooms on board ships -- Design conditions and basis of calculations |
| 85 | ISO 8863-1987 | 船舶驾驶室窗户窗格玻璃热风加热 Ships wheelhouse windows -- Heating by hot air of glass panes |
| 86 | ISO 8864-1987 | 船舶驾驶室的空气调节和通风设计条件和计算基础 Air-conditioning and ventilation of wheelhouse on board ships -- Design conditions and basis of calculations |
| 87 | ISO 8860.2 Technical Corrigendum 1-1990 | 信息处理以限定的频率7958次磁通变换/弧度在每侧80磁道上调制录制的90mm(35in)盒式软磁盘的数据交换第2部分:磁道排列格式技术勘误表1 Information processing; data interchange on 90 mm (35 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad on 80 tracks on each side; part 2: track format; technical corrigendum 1 |
| 88 | ISO 8866 Technical Corrigendum 1-1991 | 旋转金钢钻设备系列C技术勘误表1 Rotary core diamond drilling equipment; system C; technical corrigendum 1 |
| 89 | ISO 8866 Technical Corrigendum 2-1992 | 取芯钻石钻进设备技术勘误2 Rotary core diamond drilling equipment; system C; technical corrigendum 2 |
| 90 | ISO 8860.1-1987 | 信息处理以限定的频率7958次磁通变换/弧度在每侧80列磁道上调制录制的90mm(35in)盒式软磁盘的数据交换第1部分:尺寸物理和磁性特征 Information processing -- Data interchange on 90 mm (35 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad on 80 tracks on each side -- Part 1: Dimensional physical and magnetic characteristics |
| 91 | ISO 8859.3-1999 | Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 3: Latin Alphabet No3 First Edition |
| 92 | ISO 8859.4-1998 | Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 4: Latin Alphabet No 4 First Edition |
| 93 | ISO 8859.5-1999 | Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 5: Latin/Cyrillic Alphabet Second Edition |
| 94 | ISO 8859.6-1999 | Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 6: Latin/Arabic Alphabet First Edition |
| 95 | ISO 8859.8-1999 | Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 8: Latin/Hebrew Alphabet First Edition |
| 96 | ISO 8859.9-1999 | Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 9: Latin Alphabet No 5 Second Edition |
| 97 | ISO 8860.1 Technical Corrigendum 1-1990 | 信息处理以限定的频率7958次磁通变换/弧度在每侧80列磁道上调制录制的90mm(35in)盒式软磁盘的数据交换第1部分:尺寸、物理和磁特性技术勘误表1 Information processing; data interchange on 90 mm (35 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad on 80 tracks on each side; part 1: dimensional physical and magnetic characteristics; technical corrigendum |
| 98 | ISO 8859.7-2003 | 信息处理8位单字节编码图形字符集第7部分:拉丁/希腊字母表 Information technology 8-bit single-byte coded graphic character sets Part 7: Latin/Greek alphabet First Edition |
| 99 | ISO 8859.11-2001 | 信息技术8位单字节编码图形字符集第11部分:拉丁/泰字母 Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 11: Latin/Thai Alphabet First Edition |
| 100 | ISO 8859.1-1998 | 信息技术8位单字节编码图形字符集第1部分:1号拉丁字母 Information Technology - 8-Bit Single-Byte Coded Graphic Character Sets - Part 1: Latin Alphabet No 1 First Edition |