| 序号 | 标准号 | 标准名称 |
 1 | ISO 9170.2-1999 | 医疗气体管道系统用终端设备第2部分:麻醉气体清除系统用的终端设备 Terminal units for medical gas pipeline systems -- Part 2: Terminal units for anaesthetic gas scavenging systems |
| 2 | ISO 9171.1-1990 | 信息技术信息交换用130mm一次性光学磁盘第1部分:无记录光学磁盘 Information Technology - 130 mm Optical Disk Cartridge Write Once for Information Interchange - Part 1: Unrecorded Optical Disk Cartridge First Edition; CEN EN 29171-1: 1993 |
| 3 | ISO 9171.2-1990 | 信息技术信息交换用130mm一次性光学磁盘第2部分:记录格式 Information Technology - 130 mm Optical Disk Cartridge Write Once for Information Interchange - Part 2: Recording Format First Edition; CEN EN 29171-2: 1993 |
| 4 | ISO 917-1989 | 冷冻剂压缩机试验 Testing of refrigerant compressors |
| 5 | ISO 9173.1-1991 | 拔牙钳第1部分:螺钉和铰链接合型 Dental Extraction Forceps Part 1: Screw and Pin Joint Types First Edition; (CEN EN ISO 9173-1: 1995) |
| 6 | ISO 9174-1998 | 水质铬的测定原子吸收光谱法 Water quality -- Determination of chromium -- Atomic absorption spectrometric methods |
| 7 | ISO 9175.1-1988 | 用绘图墨水的手持式描图纸专用笔的管状笔尖第1部分:定义、尺寸、名称与符号及标志 Tubular tips for hand-held technical pens using India ink on tracing paper -- Part 1: Definitions dimensions designation and marking |
| 8 | ISO 9177.1-1989 | 制图自动铅笔第1部分:分类、尺寸和性能的要求和检验 Mechanical pencils -- Part 1: Classification dimensions performance requirements and testing |
| 9 | ISO 9158-1988 | 道路车辆无铅汽油用管嘴 Road vehicles -- Nozzle spouts for unleaded gasoline |
| 10 | ISO 9159-1988 | 道路车辆含铅汽油和柴油用管嘴 Road Vehicles - Nozzle Spouts for Leaded Gasoline and Diesel Fuel First Edition |
| 11 | ISO 9160-1988 | 信息处理数据加密物理层互用性要求 Information processing -- Data encipherment -- Physical layer interoperability requirements |
| 12 | ISO 9162-1989 | 石油产品燃料(F级)液化石油气规范 Petroleum products -- Fuels (class F) -- Liquefied petroleum gases -- Specifications |
| 13 | ISO 9167.1-1992 | 油菜种子葡萄糖甙含量测定第1部分:高性能液相色谱法 Rapeseed -- Determination of glucosinolates content -- Part 1: Method using high-performance liquid chromatography |
| 14 | ISO 9168-1991 | 手持式牙科器械软管连接件 Dental handpieces -- Hose connectors |
| 15 | ISO 9167.2-1994 | 菜籽 芥子油甙含量的测定 第2部分:用χ射线荧光光谱法 Rapeseed -- Determination of glucosinolates content -- Part 2: Method using X-ray fluorescence spectrometry |
| 16 | ISO 9157-2002 | 航空航天等级为:1100MPa(室温下)/425℃、1100MPa(室温下)/650℃、1210MPa(室温下)/425℃、1210MPa(室温下)/730℃、1550MPa(室温下)/235℃、1550MPa(室温下)/425℃或1550MPa(室温下)/600℃带MJ螺纹的花键扳动自锁螺母尺寸 Aerospace - Nuts Spline-Drive Self-Locking with MJ Threads Classifications: 1 100 MPa (at Ambient Temperature)/425 Degrees C 1 100 MPa (at Ambient Temperature)/650 Degrees C 1 210 MPa (at Ambient Temperature)/425 Degrees C 1 210 MPa (at Amb |
| 17 | ISO 9163-2005 | 纺织玻璃纤维浸渍粗纱拉伸强度的测定和试验样品的制造 Textile glass -- Rovings -- Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| 18 | ISO 9161-2004 | 二氧化铀粉末 表观密度和振实密度的测定 Uranium dioxide powder -- Determination of apparent density and tap density |
| 19 | ISO 9144-1991 | 证券光学字符识别线位置和结构 Securities -- Optical character recognition line -- Position and structure |
| 20 | ISO 9147-1987 | 生铁定义和分类 Pig-irons -- Definition and classification |
| 21 | ISO 9148-1987 | 装饰用成卷复合软木条试验方法 Composition cork in rolls for decoration -- Test methods |
| 22 | ISO 9149-1987 | 装饰用成卷复合软木条规范 Composition cork in rolls for decoration -- Specifications |
| 23 | ISO 9150-1988 | 防护服质料受到小的熔融金属溅击影响的测定 Protective clothing -- Determination of behaviour of materials on impact of small splashes of molten metal |
| 24 | ISO 9151-1995 | 耐热阻燃防护服火焰暴露下近火传热的测定方法 Protective clothing against heat and flame -- Determination of heat transmission on exposure to flame |
| 25 | ISO 9152-1998 | 航空航天强度级别为1100MPa的钛合金MJ螺纹螺栓采购规范 Aerospace -- Bolts with MJ threads in titanium alloys strength class 1 100 MPa -- Procurement specification |
| 26 | ISO 9154-1999 | 航空航天由强度等级为1550MPa的耐热镍基合金制成的带MJ螺纹的螺栓购置规范 Aerospace -- Bolts with MJ threads made of heat-resistant nickel-based alloy strength class 1 550 MPa -- Procurement specification |
| 27 | ISO 9156-1998 | 航空航天平底锪孔MJ螺纹缩径系列90°角固定自锁式系紧螺母1100MPa(室温)/235℃、1100MPa(室温)/315℃和1100MPa(室温)/425℃尺寸 Aerospace - Nuts Anchor Self-Locking Fixed 90 Degree Corner Reduced Series with Counterbore with MJ Threads Classifications: 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius and 1 100 |
| 28 | ISO 9142-2003 | 粘合剂胶粘连接试验用标准实验室老化条件的选择导则 Adhesives -- Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| 29 | ISO 9137-1990 | 磨料粒度毛细(管)作用测定 Abrasive grains -- Determination of capillarity |
| 30 | ISO 9138-1993 | 磨料粒度取样和分割 Abrasive grains -- Sampling and splitting |
| 31 | ISO 9139-1998 | 航空航天常规或有槽(齿形)螺母采购规范 Aerospace -- Nuts plain or slotted (castellated) -- Procurement specification |
| 32 | ISO 9140-1998 | 航空航天常规或有槽(齿形)螺母试验方法 Aerospace -- Nuts plain or slotted (castellated) -- Test methods |
| 33 | ISO 9141-1989 | 道路车辆诊断系统对数字信息交换的要求 Road vehicles -- Diagnostic systems -- Requirements for interchange of digital information |
| 34 | ISO 9141.2-1994 | 道路车辆诊断系统第2部分:交换数字信息的 CARB 要求 Road vehicles -- Diagnostic systems -- Part 2: CARB requirements for interchange of digital information |
| 35 | ISO 9141.3-1998 | 道路车辆诊断系统第3部分:车辆和OBD2扫描工具之间通信的检验 Road vehicles -- Diagnostic systems -- Part 3: Verification of the communication between vehicle and OBD II scan tool |
| 36 | ISO 9141.2 AMD 1-1996 | 道路车辆诊断系统第2部分:交换数字信息的 CARB 要求修改件1 Road vehicles - Diagnostic systems - Part 2: CARB requirements for interchange of digital information; Amendment 1 |
| 37 | ISO 9142 Technical Corrigendum 1-1995 | 粘合剂胶粘连接试验用标准实验室老化条件的选择导则技术勘误表1 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints; Technical Corrigendum 1 |
| 38 | ISO 9125-1990 | 纤维-水泥板和配件 Fibre-cement slates and fittings |
| 39 | ISO 9126.1-2001 | 软件工程产品质量第1部分:质量模式 Software Engineering - Product Quality - Part 1: Quality Model First Edition; Cancels and Replaces ISO/IEC 9126:1991 |
| 40 | ISO 9127-1988 | 信息处理系统用户软件包的用户文件和覆盖信息 Information processing systems -- User documentation and cover information for consumer software packages |
| 41 | ISO 9128-1987 | 道路车辆标注制动液类型的图形符号两种语言版 Road vehicles -- Graphical symbols to designate brake fluid types |
| 42 | ISO 9129-1988 | 摩托车惯性矩的测量方法 Motorcycles -- Measurement methods for moments of inertia |
| 43 | ISO 9131-1993 | 三轮机动自行车和摩托车的尺寸词汇 Three-wheeled mopeds and motorcycles -- Dimensions -- Vocabulary |
| 44 | ISO 9130-2005 | 摩托车重心位置的测量方法 Motorcycles -- Measurement method for location of centre of gravity |
| 45 | ISO 9112-1991 | 卡车和公共汽车轮胎轮胎滚动周长的测量方法承载新轮胎 Truck and bus tyres -- Method of measuring tyre rolling circumference -- Loaded new tyres |
| 46 | ISO 9113-1986 | 塑料聚丙烯(PP)和丙烯共聚物热塑塑料全同指数的测定 Plastics -- Polypropylene (PP) and propylene-copolymer thermoplastics -- Determination of isotactic index |
| 47 | ISO 9114-1997 | 原油通过氢化物反应进行水含量的测定现场法 Crude petroleum -- Determination of water content by hydride reaction -- Field method |
| 48 | ISO 9117-1990 | 色漆和清漆贯穿干燥状态和贯穿干燥间试验方法 Paints and varnishes -- Determination of through-dry state and through-dry time -- Method of test |
| 49 | ISO 9119-1990 | 越野雪橇连接固定区要求和试验方法 Cross-country skis -- Binding mounting area -- Requirements and test methods |
| 50 | ISO 91.2-1991 | 石油测量数值表第2部分:根据参比温度20℃编制的表 Petroleum measurement tables -- Part 2: Tables based on a reference temperature of 20 degrees C |
| 51 | ISO 9123-2001 | 明渠水流测量水位-落差-流量的关系 Measurement of liquid flow in open channels -- Stage-fall-discharge relationships |
| 52 | ISO 9120-1997 | 石油和相关产品 蒸气透平油有其他油品空气释放特性的测定 撞击法 Petroleum and related products -- Determination of air-release properties of steam turbine and other oils -- Impinger method |
| 53 | ISO 9125 Technical Corrigendum 1-1993 | 纤维-水泥板和配件技术勘误1 Fibre-cement slates and fittings; technical corrigendum 1 |
| 54 | ISO 9116-2004 | 生咖啡规范方法指南 Green coffee -- Guidelines on methods of specification |
| 55 | ISO 9101-1987 | 表面活性剂界面张力的测定滴体积法 Surface active agents -- Determination of interfacial tension -- Drop volume method |
| 56 | ISO 910-1977 | 工业用硫酸和发烟硫酸总酸度的测定以及发烟硫酸中游离三氧化硫含量的计算滴定法 Sulphuric acid and oleum for industrial use -- Determination of total acidity and calculation of free sulphur trioxide content of oleum -- Titrimetric method |
| 57 | ISO 9102-1997 | 柴油发动机内螺纹喷嘴架242526和261型 Diesel engines -- Screw-in injection nozzle holders types 24 25 26 and 261 |
| 58 | ISO 9103-1987 | 道路车辆压燃式发动机23型螺旋拧入式注油嘴 Road vehicles -- Compression-ignition engines -- Screw-in injection nozzle holder type 23 |
| 59 | ISO 9104-1991 | 封闭管道中液体流量的测量液体的电磁流量计特性评定法 Measurement of fluid flow in closed conduits -- Methods of evaluating the performance of electromagnetic flow-meters for liquids |
| 60 | ISO 9110.1-1990 | 液压传动测量技术第1部分:通用测量原理 Hydraulic fluid power -- Measurement techniques -- Part 1: General measurement principles |
| 61 | ISO 9110.2-1990 | 液压传动测量技术第2部分:在封闭式管道中对平均稳定压力的测量 Hydraulic fluid power -- Measurement techniques -- Part 2: Measurement of average steady-state pressure in a closed conduit |
| 62 | ISO 91.1-1992 | 石油测量数值表第1部分:根据参比温度15℃和60°F编制的表 Petroleum measurement tables -- Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F |
| 63 | ISO 9100.8-2005 | 玻璃容器 真空凸缘瓶口 第8部分：63、66和70普通瓶口 Glass containers -- Vacuum lug finishes -- Part 8: 63 66 and 70 regular |
| 64 | ISO 9100.9-2005 | 玻璃容器 真空凸缘瓶口 第9部分：63、66和70深瓶口 Glass containers -- Vacuum lug finishes -- Part 9: 63 66 and 70 deep |
| 65 | ISO 9099-1987 | 船舶干燥的储备室的空气调节和通风设计条件和计算基础 Air-conditioning and ventilation of dry provision rooms on board ships -- Design conditions and basis of calculations |
| 66 | ISO 9100.10-2005 | 玻璃容器 真空凸缘瓶口 第10部分：77普通瓶口 Glass containers -- Vacuum lug finishes -- Part 10: 77 regular |
| 67 | ISO 9100.11-2005 | 玻璃容器 真空凸缘瓶口 第11部分：82普通瓶口 Glass containers -- Vacuum lug finishes -- Part 11: 82 regular |
| 68 | ISO 9100.1-2005 | 玻璃容器 真空凸缘瓶口 第1部分：总则 Glass containers -- Vacuum lug finishes -- Part 1: General |
| 69 | ISO 9100.12-2005 | ISO 9100-12:2005 Glass containers -- Vacuum lug finishes -- Part 12: 89 regular |
| 70 | ISO 9100.13-2005 | 玻璃容器 真空凸缘瓶口 第13部分：100普通瓶口 Glass containers -- Vacuum lug finishes -- Part 13: 100 regular |
| 71 | ISO 9100.14-2005 | 玻璃容器 真空凸缘瓶口 第14部分：110普通瓶口 Glass containers -- Vacuum lug finishes -- Part 14: 110 regular |
| 72 | ISO 9100.5-2005 | 玻璃容器 真空凸缘瓶口 第5部分：43和48普通瓶口 Glass containers -- Vacuum lug finishes -- Part 5: 43 and 48 regular |
| 73 | ISO 9100.6-2005 | 玻璃容器 真空凸缘瓶口 第6部分：53和58普通瓶口 Glass containers -- Vacuum lug finishes -- Part 6: 53 and 58 regular |
| 74 | ISO 9100.7-2005 | 玻璃容器 真空凸缘瓶口 第7部分：58深瓶口 Glass containers -- Vacuum lug finishes -- Part 7: 58 deep |
| 75 | ISO 9092-1988 | 纺织品非织造品定义 Textiles -- Nonwovens -- Definition |
| 76 | ISO 9093.1-1994 | 小船船底阀和整个船配件第1部分:金属的 Small craft -- Seacocks and through-hull fittings -- Part 1: Metallic |
| 77 | ISO 9095-1990 | 钢管鉴别材料用连续符号标志和颜色码 Steel tubes -- Continuous character marking and colour coding for material identification |
| 78 | ISO 9097-1991 | 小型船舶电扇 Small craft -- Electric fans |
| 79 | ISO 9098.1-1994 | 家用双层床的安全要求和试验第1部分:安全要求 Bunk beds for domestic use -- Safety requirements and tests -- Part 1: Safety requirements |
| 80 | ISO 9098.2-1994 | 家用双层床的安全要求和试验第2部分:试验方法 Bunk beds for domestic use -- Safety requirements and tests -- Part 2: Test methods |
| 81 | ISO 9094.2-2002 | 小艇防火第2部分:艇体长超过15m的小艇 Small craft -- Fire protection -- Part 2: Craft with a hull length of over 15 m |
| 82 | ISO 9093.2-2002 | 小艇通海旋塞及贯穿艇体配件第1部分:非金属的 Small craft -- Seacocks and through-hull fittings -- Part 2: Non-metallic |
| 83 | ISO 9096-2003 | 固定污染源的排放气载尘埃颗粒流量和浓度的测定人工重力法 Stationary source emissions -- Manual determination of mass concentration of particulate matter |
| 84 | ISO 9094.1-2003 | 小艇 防火 第1部分：船体长度15 m以下的小艇 Small craft -- Fire protection -- Part 1: Craft with a hull length of up to and including 15 m |
| 85 | ISO 9083-2001 | 正齿轮和斜齿轮的负载能力的计算船用齿轮的应用 Calculation of load capacity of spur and helical gears -- Application to marine gears |
| 86 | ISO 9084-2000 | 正齿轮和斜齿轮承载能力计算快速齿轮和类似要求齿轮的应用 Calculation of load capacity of spur and helical gears -- Application to high speed gears and gears of similar requirements |
| 87 | ISO 9085-2002 | 正齿轮和斜齿轮的荷载能力计算工业齿轮应用 Calculation of load capacity of spur and helical gears -- Application for industrial gears |
| 88 | ISO 9086.1-1987 | 木材物理和机械试验方法词汇第1部分:一般概念和宏观组织三种语言版 Wood -- Methods of physical and mechanical testing -- Vocabulary -- Part 1: General concepts and macrostructure |
| 89 | ISO 9087-1998 | 木材轴向负荷下钉子和螺钉固着力的测定 Wood - Determination of nail and screw holding power under axial load application |
| 90 | ISO 9088-1997 | 铝生产用碳素材料预烙阳极的阴极块用比重法对二甲苯密度的测定 Carbonaceous materials used for the production of aluminium -- Cathode blocks and prebaked anodes -- Determination of the density in xylene by a pyknometric method |
| 91 | ISO 9089-1989 | 海上建筑物移动式近海设备锚用绞车 Marine structures -- Mobile offshore units -- Anchor winches |
| 92 | ISO 9090-1989 | 气焊以及类似的处理过程中设备的气密特性 Gas tightness of equipment for gas welding and allied processes |
| 93 | ISO 9091.1-1991 | 轻质碳氢化合物制冷液船上球型容器的校准第1部分:立体摄影测绘 Refrigerated light-hydrocarbon fluids -- Calibration of spherical tanks in ships -- Part 1: Stereo-photogrammetry |
| 94 | ISO 9091.2-1992 | 轻质碳氢化合物制冷液船上球型容器的校准第2部分:三角测量 Refrigerated light hydrocarbon fluids -- Calibration of spherical tanks in ships -- Part 2: Triangulation measurement |
| 95 | ISO 9075.2-1999 | 信息技术数据库语言SQL第2部分:基础 Information Technology - Database Languages - SQL - Part 2: Foundation (SQL/Foundation) First Edition; Corrigendum 1: 12/15/2000; Amendment 1: 03/15/2001; Corrigendum 1 to Amendment 1: 06/01/2003; Corrigendum 2: 6/01/2003 |
| 96 | ISO 9075.3-1999 | 信息技术数据库语言SQL第3部分:呼叫水平接口 Information Technology - Database Languages - SQL - Part 3: Call-Level Interface (SQL/CLI) Second Edition; Corrigendum 1: 12/15/2000; Corrigendum 2: 6/01/2003 |
| 97 | ISO 9075.4-1999 | 信息技术数据库语言SQL第4部分:连续存储模块(SQL/PSM) Information Technology - Database Languages - SQL - Part 4: Persistent Stored Modules (SQL/PSM) Second Edition; Corrigendum 1: 12/15/2000; Corrigendum 2: 06/01/2003 |
| 98 | ISO 9075.5-1999 | 信息技术数据库语言SQL第5部分:主语言连接(SQL/Bindings) Information Technology - Database Languages - SQL - Part 5: Host Language Bindings (SQL/Bindings) First Edition; Corrigendum 1 12/15/2000; Amendment 1: 03/15/2001; Corrigendum 1 to Amendment 1: 06/01/2003; Corrigendum 2: 6/01/2003 |
| 99 | ISO 9075.9-2001 | 信息技术数据库语言:SQL第9部分:外部数据的管理 Information Technology - Database Languages - SQL - Part 9: Management of External Data (SQL/MED) First Edition; Corrigendum 1: 6/01/2003 |
| 100 | ISO 9080-2003 | 塑料管和管道系统 用外推法测定长期耐静液压强度 Plastics piping and ducting systems -- Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |