| 序号 | 标准号 | 标准名称 |
 1 | ISO 9390-1990 | 水质硼酸盐的测定用甲亚胺-H进行的光谱测定法 Water quality -- Determination of borate -- Spectrometric method using azomethine-H |
| 2 | ISO 9391-1993 | 水质宏无脊椎生物的深水取样菌落使用导则 Water quality -- Sampling in deep waters for macro-invertebrates -- Guidance on the use of colonization qualitative and quantitative samplers |
| 3 | ISO 939-1980 | 香料和调味品水含量的测定挟带法 Spices and condiments -- Determination of moisture content -- Entrainment method |
| 4 | ISO 9392-1989 | 胶凝软木盘密封性能 Agglomerated cork discs -- Sealing behaviour |
| 5 | ISO 9393.2-1997 | 热塑性塑料阀门压力试验方法和要求第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门的试验条件和基本要求 Thermoplastics valves -- Pressure test methods and requirements -- Part 2: Test conditions and basic requirements for PE PP PVC-U and PVDF valves |
| 6 | ISO 9394-1998 | 眼科光学接触镜片和接触透镜护理制品用兔眼睛研究目镜法测定生物相溶性 Ophthalmic optics -- Contact lenses and contact lens care products -- Determination of biocompatibility by ocular study using rabbit eyes |
| 7 | ISO 9393.2 Technical Corrigendum 1-1997 | 热塑性塑料阀门压力试验方法和要求第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门的试验条件和基本要求技术勘误1 Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE PP PVC-U and PVDF valves; Technical Corrigendum 1 |
| 8 | ISO 9393.1-2004 | 热塑性塑料阀门压力试验方法第1部分:总则 Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 1: General |
| 9 | ISO 9382-1990 | 船载驳全系列分类和主要要求 Shipborne barges all series -- Classification and main requirements |
| 10 | ISO 9383-1995 | 纤维加强水泥制品屋顶和镶面(建筑物)短波纹或不对称的面板和配件 Products in fibre-reinforced cement -- Short corrugated or asymmetrical section sheets and fittings for roofing |
| 11 | ISO 9384-1991 | 纤维水泥墙面板 Fibre-cement siding shingles |
| 12 | ISO 9385-1990 | 玻璃及玻璃陶瓷努氏硬度试验 Glass and glass-ceramics -- Knoop hardness test |
| 13 | ISO 9386.1-2000 | 运动性受损的残疾人用动力操纵的提升平台安全、尺寸和功能操作规则第1部分:垂直提升平台 Power-operated lifting platforms for persons with impaired mobility -- Rules for safety dimensions and functional operation -- Part 1: Vertical lifting platforms |
| 14 | ISO 9386.2-2000 | 运动性受损的残疾人用动力操纵的提升平台安全、尺寸和功能操作规则第2部分:在一个倾斜面移动的就座者、站立者和使用轮椅者用的动力升降阶梯 Power-operated lifting platforms for persons with impaired mobility -- Rules for safety dimensions and functional operation -- Part 2: Powered stairlifts for seated standing and wheelchair users moving in an inclined plane |
| 15 | ISO 9374.4-1989 | 起重机提供的信息第4部分:动臂起重机 Cranes -- Information to be provided -- Part 4: Jib cranes |
| 16 | ISO 9374.5-1991 | 起重机提供的信息第5部分:桥式起重机和龙门式起重机 Cranes -- Information to be provided -- Part 5: Overhead travelling cranes and portal bridge cranes |
| 17 | ISO 9375-1989 | 木工机械固定位置的砂轮机术语 Woodworking machines -- Disc sanding machines with spindle in fixed position -- Nomenclature |
| 18 | ISO 9376-1988 | 早马铃薯冷却和冷藏运输指南 Early potatoes -- Guide to cooling and refrigerated transport |
| 19 | ISO 9377.2-2000 | 水质油气指数的测定第2部分:溶剂萃取法和气相色谱法 Water quality -- Determination of hydrocarbon oil index -- Part 2: Method using solvent extraction and gas chromatography |
| 20 | ISO 9378-1993 | 摄影技术微泡缩微胶片ISO曝光速度和ISO曝光范围 Photography -- Vesicular microfilm -- Determination of ISO speed and ISO range |
| 21 | ISO 9379-1989 | 门具重复开、关门的试验 Doorsets -- Repeated opening and closing test |
| 22 | ISO 9380-1990 | 门具反复扭转试验 Doorsets -- Repeated torsion test |
| 23 | ISO 9381-1989 | 门具静态扭转试验 Doorsets -- Static torsion test |
| 24 | ISO 938-1975 | 手控台式运货车基本尺寸 Hand-operated stillage trucks -- Principal dimensions |
| 25 | ISO 9364-2001 | 工业连续热浸镀铝/锌薄钢板制图和结构特性 Continuous hot-dip aluminium/zinc-coated steel sheet of commercial drawing and structural qualities |
| 26 | ISO 9366-2001 | 整体地板软木弹性砖片边缘平直度和垂直度的测定与检验 Agglomerated cork floor tiles -- Determination of dimensions and deviation from squareness and from straightness of edges |
| 27 | ISO 9367.1-1989 | 滚装船上道路车辆捆绑和固定装置一般要求第1部分:商业车辆和车辆组合(半挂车除外) Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships -- General requirements -- Part 1: Commercial vehicles and combinations of vehicles semi-trailers excluded |
| 28 | ISO 9367.2-1994 | 滚装船上汽车捆绑和固定装置一般要求第2部分:半挂车 Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships -- General requirements -- Part 2: Semi-trailers |
| 29 | ISO 9368.1-1990 | 用称量法测量封闭管道中液体的流量测试装置规程第1部分:静态称量装置 Measurement of liquid flow in closed conduits by the weighing method -- Procedures for checking installations -- Part 1: Static weighing systems |
| 30 | ISO 9370-1997 | 塑料风化试验中辐射曝光的仪器测定一般导则和基本试验方法 Plastics -- Instrumental determination of radiant exposure in weathering tests -- General guidance and basic test method |
| 31 | ISO 937-1978 | 肉和肉制品氮含量的测定(参照法) Meat and meat products -- Determination of nitrogen content (Reference method) |
| 32 | ISO 9373-1989 | 起重机和有关设备试验期间测量参数精确度的要求 Cranes and related equipment -- Accuracy requirements for measuring parameters during testing |
| 33 | ISO 9374.1-1989 | 起重机提供的信息第1部分:总则 Cranes -- Information to be provided -- Part 1: General |
| 34 | ISO 9374.3-2002 | 起重机应提供的咨询、定购、报价和供应信息第3部分:塔式起重机 Cranes -- Information to be provided for enquiries orders offers and supply -- Part 3: Tower cranes |
| 35 | ISO 9356-1989 | 带或不带连接管件的聚烯烃管总成抗内压试验方法 Polyolefin pipe assemblies with or without jointed fittings -- Resistance to internal pressure -- Test method |
| 36 | ISO 9357-1990 | 作物保护设备农用喷雾器药罐容积和灌注口直径 Equipment for crop protection -- Agricultural sprayers -- Tank nominal volume and filling hole diameter |
| 37 | ISO 9358-1994 | 光学及光学仪器成像系统的纱幕眩光测量的定义及方法 Optics and optical instruments -- Veiling glare of image forming systems -- Definitions and methods of measurement |
| 38 | ISO 9359-1989 | 空气质量环境空气质量评定用分层取样法 Air quality -- Stratified sampling method for assessment of ambient air quality |
| 39 | ISO 9360.1-2000 | 麻醉和呼吸设备使人体呼吸气体增湿的热和潮气交换(HMEs)第1部分:与最小潮量一起使用的热和潮气交换 Anaesthetic and respiratory equipment -- Heat and moisture exchangers (HMEs) for humidifying respired gases in humans -- Part 1: HMEs for use with minimum tidal volumes of 250 ml |
| 40 | ISO 9360.2-2001 | 麻醉和呼吸设备使人体呼吸气体增湿的热和潮气交换器(HMEs)第2部分:潮气量最小为250ml的气管造口病人用热和潮气交换器 Anaesthetic and respiratory equipment -- Heat and moisture exchangers (HMEs) for humidifying respired gases in humans -- Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml |
| 41 | ISO 9361.1-1991 | 可转位镶齿刀具圆角陶瓷镶齿刀片第2部分:无固定孔镶齿刀片的尺寸 Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 1: Dimensions of inserts without fixing hole |
| 42 | ISO 9361.2-1991 | 可转位镶齿刀具圆角陶瓷镶齿刀片第3部分:具有圆柱形固定孔的镶齿刀片的尺寸 Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 2: Dimensions of inserts with cylindrical fixing hole |
| 43 | ISO 936-1998 | 肉和肉制品总灰分的测定 Meat and meat products -- Determination of total ash |
| 44 | ISO 9362-1994 | 银行事务银行事务远程通讯电报银行鉴别码 Banking -- Banking telecommunication messages -- Bank identifier codes |
| 45 | ISO 9346-1987 | 热绝缘质量转移物理量和定义 Thermal insulation -- Mass transfer -- Physical quantities and definitions |
| 46 | ISO 935-1988 | 动植物脂肪和油滴定度的测定 Animal and vegetable fats and oils -- Determination of titre |
| 47 | ISO 9352-1995 | 塑料用磨轮对抗磨耗性能的测定 Plastics -- Determination of resistance to wear by abrasive wheels |
| 48 | ISO 9354-1989 | 纺织品织法代码和实例 Textiles -- Weaves -- Coding system and examples |
| 49 | ISO 9355.1-1999 | 显示和控制调节器设计的人类工效学要求第1部分:用户与显示和控制调节器的相互作用 Ergonomic requirements for the design of displays and control actuators -- Part 1: Human interactions with displays and control actuators |
| 50 | ISO 9355.2-1999 | 显示和控制调节器设计的人类工效学要求第2部分:显示 Ergonomic requirements for the design of displays and control actuators -- Part 2: Displays |
| 51 | ISO 9354 Technical Corrigendum 1-2000 | 纺织材料编织编码系统和实例技术勘误1 Textiles - Weaves - Coding system and examples; Technical Corrigendum 1 |
| 52 | ISO 9349-2004 | 预绝缘高强度铸铁管道系统 Preinsulated ductile iron pipeline systems |
| 53 | ISO 9339.2-1998 | 光学及光学仪器接触镜片厚度测定第2部分:水凝胶接触镜片 Optics and optical instruments -- Contact lenses -- Determination of thickness -- Part 2: Hydrogel contact lenses |
| 54 | ISO 9340-1996 | 光学及光学仪器接触镜片直接接触镜片的应力测定 Optics and optical instruments -- Contact lenses -- Determination of strains for rigid contact lenses |
| 55 | ISO 9341-1996 | 光学及光学仪器接触镜片直接接触镜片中夹杂物和表面不完备性的测定 Optics and optical instruments -- Contact lenses -- Determination of inclusions and surface imperfections for rigid contact lenses |
| 56 | ISO 934-1980 | 动植物脂肪和油水含量的测定夹带法 Animal and vegetable fats and oils -- Determination of water content -- Entrainment method |
| 57 | ISO 9344-1996 | 光学和光学仪器显微镜目镜的分度 Optics and optical instruments -- Microscopes -- Graticules for eyepieces |
| 58 | ISO 9345.1-1996 | 光学和光学仪器显微镜有关机械参考面投影距离第1部分:160mm长的管 Optics and optical instruments -- Microscopes -- Imaging distances related to mechanical reference planes -- Part 1: Tube length 160 mm |
| 59 | ISO 9345.2-2003 | 光学和光学仪器 显微镜 相对机械参考面的象距 第2部分：无限修正光学系统 Optics and optical instruments -- Microscopes -- Imaging distances related to mechanical reference planes -- Part 2: Infinity-corrected optical systems |
| 60 | ISO 9342.1-2005 | 光学及光学仪器焦距校正用检验透镜 Optics and optical instruments -- Test lenses for calibration of focimeters -- Part 1: Test lenses for focimeters used for measuring spectacle lenses |
| 61 | ISO 9343-2004 | 手钳和夹具滑动结合手钳尺寸和试验值 Pliers and nippers -- Slip joint pliers -- Dimensions and test values |
| 62 | ISO 9334-1995 | 光学和光学仪器光学传递函数定义和数学关系 Optics and optical instruments -- Optical transfer function -- Definitions and mathematical relationships |
| 63 | ISO 9335-1995 | 光学和光学仪器光学传递函数测量原理和程序 Optics and optical instruments -- Optical transfer function -- Principles and procedures of measurement |
| 64 | ISO 9336.1-1994 | 光学和光学仪器光传递函数的应用第1部分:35 mm 静物照相机用转换镜头 Optics and optical instruments -- Optical transfer function -- Application -- Part 1: Interchangeable lenses for 35 mm still cameras |
| 65 | ISO 9336.2-1994 | 光学和光学仪器光传递函数的应用第2部分:办公室复印机用透镜 Optics and optical instruments -- Optical transfer function -- Application -- Part 2: Lenses for office copiers |
| 66 | ISO 9336.3-1994 | 光学和光学仪器光传递函数的应用第3部分:望远镜 Optics and optical instruments -- Optical transfer function -- Application -- Part 3: Telescopes |
| 67 | ISO 9337.1-1999 | 接触镜片后屈光度的测定第1部分:手工聚焦的聚焦仪法 Contact lenses -- Determination of back vertex power -- Part 1: Method using focimeter with manual focusing |
| 68 | ISO 9338-1996 | 光学和光学仪器接触眼镜片直径的测定 Optics and optical instruments -- Contact lenses -- Determination of the diameters |
| 69 | ISO 9339.1-1996 | 光学及光学仪器接触镜片厚度测定第1部分:直接接触镜片 Optics and optical instruments -- Contact lenses -- Determination of the thickness -- Part 1: Rigid contact lenses |
| 70 | ISO 9339.2 Technical Corrigendum 1-2000 | 光学及光学仪器接触镜片厚度测定第2部分:水凝胶接触镜片技术勘误1 Optics and optical instruments - Contact lenses - Determination of thickness - Part 2: Hydrogel contact lenses; Technical Corrigendum 1 |
| 71 | ISO 9337.2-2004 | 接触镜 后顶屈光度的测定 第2部分: 浸入盐水中的接触镜的测量 Contact lenses -- Determination of back vertex power -- Part 2: Measurement of contact lenses immersed in saline |
| 72 | ISO 9329.2-1997 | 受压力的无缝钢管交货技术条件第2部分:规定高温性能的非合金钢和合金钢 Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Unalloyed and alloyed steels with specified elevated temperature properties |
| 73 | ISO 9329.3-1997 | 压力用途的无缝钢管交货技术条件第3部分:规定低温性能的非合金钢和合金钢 Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Unalloyed and alloyed steels with specified low temperature properties |
| 74 | ISO 9329.4-1997 | 受压力的无缝钢管交货技术条件第4部分:奥氏体无缝钢 Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Austenitic stainless steels |
| 75 | ISO 9330.1-1990 | 受压力的焊接钢管交货技术条件第1部分:规定室温性能的非合金钢管 Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steel tubes with specified room temperature properties |
| 76 | ISO 9330.2-1997 | 压力容器用焊接钢管交货技术条件第2部分:规定高温性能的电阻焊接和感应焊接非合金钢管和合金钢管 Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
| 77 | ISO 9330.3-1997 | 压力容器用焊接钢管交货技术条件第3部分:规定低温性能的电阻焊接和感应焊接非合金钢管和合金钢管 Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties |
| 78 | ISO 9330.4-2000 | 焊接压力钢管交货技术条件第4部分:规定高温性能的埋弧焊接非合金钢管和合金钢管 Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
| 79 | ISO 9330.5-2000 | 压力容器用焊接钢管交货技术条件第5部分:规定低温性能的埋弧焊接非合金钢管和合金钢管 Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties |
| 80 | ISO 9330.6-1997 | 受压力的焊接钢管交货技术条件第6部分:奥氏体不锈钢管的焊接长度 Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 6: Longitudinally welded austenitic stainless steel tubes |
| 81 | ISO 9333-1990 | 镶牙材料 Dentistry -Brazing materials |
| 82 | ISO 9327.4-1999 | 压力用途的钢锻件和轧制或锻造的棒材技术交货条件第4部分:高强度可焊接细粒钢 Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 4: Weldable fine grain steels with high proof strength |
| 83 | ISO 9327.5-1999 | 压力用途的钢锻件和轧制或锻造的棒材技术交货条件第5部分:不锈钢 l forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 5: Stainless steels |
| 84 | ISO 9329.1-1989 | 受压力的无缝钢管交货技术条件第1部分:规定室温性能的非合金钢 Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steels with specified room temperature properties |
| 85 | ISO 9328.1-2003 | 压力容器用钢板和带材交货技术条件第1部分:总要求 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 1: General requirements |
| 86 | ISO 9328.7-2004 | 压力用途的钢板和钢带 交货技术条件 第7部分:不锈钢 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels |
| 87 | ISO 9328.2-2004 | 压力容器用钢板和带材交货技术条件第2部分:具有规定室温和高温性能的非合金和低合金钢 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| 88 | ISO 9328.3-2004 | 压力容器用钢板和带材交货技术条件第3部分:具有规定低温性能的镍合金钢 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 3: Weldable fine grain steels normalized |
| 89 | ISO 9328.4-2004 | 压力容器用钢板和带材交货技术条件第4部分:正火、淬火和回火状态提供的具有高屈服应力的可焊细晶粒钢 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 4: Nickel-alloy steels with specified low temperature properties |
| 90 | ISO 9328.5-2004 | 压力容器用钢板和带材交货技术条件第5部分:奥氏体钢 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 5: Weldable fine grain steels thermomechanically rolled |
| 91 | ISO 9328.6-2004 | 压力用途的扁平钢材 交货技术条件 第7部分：淬火和回火的可焊接细晶粒钢 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 6: Weldable fine grain steels quenched and tempered |
| 92 | ISO 9316-1995 | 信息技术小型计算机系统接口-2 Information Technology - Small Computer System Interface-2 Second Edition |
| 93 | ISO 9318.2-1990 | 信息技术智能外围接口第2部分:磁盘驱动用装置特殊指令集 Information Technology - Intelligent Peripheral Interface Part 2: Device Specific Command Set for Magnetic Disk Drives First Edition |
| 94 | ISO 9318.3-1990 | 信息技术智能外围接口第3部分:磁盘和光盘驱动用装置总指令集 Information Technology - Intelligent Peripheral Interface Part 3: Device Generic Command Set for Magnetic and Optical Disk Drives First Edition |
| 95 | ISO 9318.4-1990 | 信息技术智能外围接口第4部分:磁带驱动用装置总指令集 Information Technology - Intelligent Peripheral Interface Part 4: Device Generic Command Set for Magnetic Tape Drives First Edition; CEN EN 29318-4: 1993 |
| 96 | ISO 93.2-1999 | 纺织机械和附件圆筒形条筒第2部分:弹簧底 Textile machinery and accessories -- Cylindrical sliver cans -- Part 2: Spring bottoms |
| 97 | ISO 9327.1-1999 | 压力用途的钢锻件和轧制或锻造的棒材技术交货条件第1部分:一般要求 Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 1: General requirements |
| 98 | ISO 9327.2-1999 | 压力用途的钢锻件和轧制或锻造的棒材技术交货条件第2部分:特定的提高温度特性的非合金和合金钢(钼镉和镉钼) Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy (Mo Cr and CrMo) steels with specified elevated temperature properties |
| 99 | ISO 9327.3-1999 | 压力用途的钢锻件和轧制或锻造的棒材技术交货条件第3部分:特定的提高温度特性的镍钢 Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 3: Nickel steels with specified low temperature properties |
| 100 | ISO 9316.2-2000 | Information Technology - Small Computer System Interface-2 (SCSI-2) - Part 2: Common Access Method (CAM) Transport and SCSI Interface Module First Edition |