| 序号 | 标准号 | 标准名称 |
 1 | ISO 10514.2-1998 | Information Technology - Programming Languages - Part 2: Generics in Modula-2 First Edition |
| 2 | ISO 10514-3-1998 | Information Technology - Programming Languages - Part 3: Object Oriented Modula-2 First Edition |
| 3 | ISO 10518 AMD 1-1994 | 手扶式草地修剪机和草地边缘修剪机机械的安全要求和试验方法修改件1 Powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety requirements and test methods - Amendment 1 |
| 4 | ISO 10520-1997 | 本地淀粉淀粉含量的测定大口水罐抛光法 Native Starch - Determination of Starch Content - Ewers Polarimetric Method First Edition |
| 5 | ISO 10521-1992 | 机动车辆道路阻力加载在基准大气条件下和底盘测功计再现条件下的测定 Motor Vehicle Road Load - Determination Under Reference Atmospheric Conditions and Reproduction on Chassis Dynamometer First Edition |
| 6 | ISO 1052-1982 | 一般工程用钢 Steels for general engineering purposes |
| 7 | ISO 10523-1994 | 水质pH值测定 Water Quality - Determination of pH First Edition |
| 8 | ISO 10524-1995 | 医用气体设备用有流量测量设备的压力调节器及压力调节器 Pressure Regulators and Pressure Regulators with Flow-Metering Devices for Medical Gas Systems First Edition; (Corrigendum 1-1996) |
| 9 | ISO 10525-1997 | 6m(20ft)长及以上的装卸货运集装箱用平衡重叉车附加稳定性试验 Counterbalanced Trucks Handling Freight Containers of 6 m (20 ft) Length and Above - Additional Stability Tests First Edition |
| 10 | ISO 10524 Technical Corrigendum 1-1996 | 医用气体设备用有流量测量设备的压力调节器及压力调节器技术勘误表白 Pressure regulators and pressure regulators with flow-metering devices for medical gas systems; Technical Corrigendum 1 |
| 11 | ISO 10522-1993 | Agricultural Irrigation Equipment - Direct-Acting Pressure-Regulating Valves First Edition |
| 12 | ISO 10524.2-2005 | Pressure regulators for use with medical gases -- Part 2: Manifold and line pressure regulators |
| 13 | ISO 10524.3-2005 | Pressure regulators for use with medical gases -- Part 3: Pressure regulators integrated with cylinder valves |
| 14 | ISO 10526-1999 | 比色法用CIE标准光源 CIE Standard Illuminants for Colorimetry Second Edition; CIE S 005 |
| 15 | ISO 10528-1995 | 纺织品织物燃烧试验前的工业洗涤方法 Textiles - Commercial Laundering Procedure for Textile Fabrics Prior to Flammability Testing First Edition (CEN EN ISO 10528 : 1995 |
| 16 | ISO 10530-1992 | 水质溶解硫化物测定使用钼蓝光度法 Water Quality - Determination of Dissolved Sulfide - Photometric Method Using Methylene Blue First Edition |
| 17 | ISO 10531-1992 | 包装满装的运输包装成组货件稳定性试验 Packaging - Complete Filled Transport Packages - Stability Testing of Unit Loads First Edition |
| 18 | ISO 1053-1975 | 锌铜含量的测定分光光度法 Zinc -- Determination of copper content -- Spectrophotometric method |
| 19 | ISO 10532-1995 | 土方机械机械悬挂补偿设备性能要求 Earth-Moving Machinery - Machine-Mounted Retrieval Device - Performance Requirements First Edition |
| 20 | ISO 10533-1993 | 土方机械吊臂承重装置 Earth-Moving Machinery - Lift-Arm Support Devices First Edition |
| 21 | ISO 10534.1-1996 | 声学阻抗管中吸声系数和阻抗的测定第1部分:使用驻波比的方法 Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 1: Method using standing wave ratio |
| 22 | ISO 10534.2-1998 | 声学阻抗管中吸声系数和阻抗的测定第2部分:传递函数法 Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 2: Transfer-function method |
| 23 | ISO 10535-1998 | 残疾人运送用提升机要求和试验方法 Hoists for the Transfer of Disabled Persons - Requirements and Test Methods First Edition |
| 24 | ISO 10536.1-2000 | 识别卡无触点集成电路卡强耦合卡第1部分:物理特性 Identification Cards - Contactless Integrated Circuit(s) Cards - Close-Coupled Cards - Part 1: Physical Characteristics Second Edition |
| 25 | ISO 10536.2-1995 | 识别卡无触点集成电路卡第2部分:耦合区域的尺寸和位置 Identification Cards - Contactless Integrated Circuit(s) Cards - Part 2: Dimensions and Location of Coupling Areas First Edition |
| 26 | ISO 10536.3-1996 | 识别卡无触点集成电路卡第3部分:电子信号和重新装配程序 Identification Cards - Contactless Integrated Circuit(s) Cards - Part 3: Electronic Signals and Reset Procedures First Edition |
| 27 | ISO 10539-2002 | 动植物脂肪和油强碱性测定 Animal and Vegetable Fats and Oils - Determination of Alkalinity First Edition |
| 28 | ISO 1054-1975 | 锌镉含量的测定极谱法 Zinc -- Determination of cadmium content -- Polarographic method |
| 29 | ISO 10542.1-2001 | 残疾人技术系统和辅助器具轮椅系紧和轮椅使用者减震系统第1部分:所有系统的要求和试验方法 Technical Systems and Aids for Disabled or Handicapped Persons - Wheelchair Tiedown and Occupant-Restraint Systems - Part 1: Requirements and Test Methods for All Systems First Edition |
| 30 | ISO 10538-1991 | Information Technology - Control Functions for Text Communication First Edition |
| 31 | ISO 10540.3-2002 | 动植物脂肪和油磷含量测定第3部分:感应耦合等离子体光辐射分光光度测定法 Animal and vegetable fats and oils Determination of phosphorus content Part 3: Method using inductively coupled plasma (ICP) optical emission spectroscopy First Edition |
| 32 | ISO 10540.1-2003 | Animal and Vegetable Fats and Oils - Determination of Phosphorus Content - Part 1: Colorimetric Method First Edition |
| 33 | ISO 10540.2-2003 | Animal and vegetable fats and oils Determination of phosphorus content Part 2: Method using graphite furnace atomic absorption spectrometry First Edition |
| 34 | ISO 10542.2-2001 | 残疾人技术系统和辅助器具轮椅系紧和轮椅使用者减震系统第2部分:四点带条式系紧系统 Technical Systems and Aids for Disabled or Handicapped Persons - Wheelchair Tiedown and Occupant-Restraint Systems - Part 2: Four-Point Strap-Type Tiedown Systems First Edition |
| 35 | ISO 10544-1992 | 焊接钢筋网制造和混凝土增强用冷轧钢丝 Cold-Reduced Steel Wire for the Reinforcement of Concrete and the Manufacture of Welded Fabric First Edition |
| 36 | ISO 10545.10-1995 | 瓷砖第10部分:上釉面砖湿膨胀率的测量 Ceramic tiles - Part 10: Determination of moisture expansion |
| 37 | ISO 10545.11-1994 | 瓷砖第11部分:上釉面砖抗碎裂的测量 Ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles |
| 38 | ISO 10545.1-1995 | 瓷砖第1部分:抽样和验收基础 Ceramic tiles - Part 1: Sampling and basis for acceptance |
| 39 | ISO 10545.12-1995 | 瓷砖第12部分:上釉面砖耐霜冻性的测量 Ceramic tiles - Part 12: Determination of frost resistance |
| 40 | ISO 10543-1993 | Seamless and Hot-Stretched-Reduced Welded Steel Tubes for Pressure Purposes - Full Peripheral Ultrasonic Thickness Testing First Edition |
| 41 | ISO 10545.12 Technical Corrigendum 1-1997 | 瓷砖第12部分:上釉面砖耐霜冻性的测量技术勘误表1 Ceramic tiles - Part 12: Determination of frost resistance; Technical Corrigendum 1 |
| 42 | ISO 10542.5-2004 | Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 5: Systems for specific wheelchairs First Edition |
| 43 | ISO 10542.3-2005 | Technical systems and aids for disabled or handicapped persons -- Wheelchair tiedown and occupant-restraint systems -- Part 3: Docking-type tiedown systems |
| 44 | ISO 10545.13-1995 | 瓷砖第十三部分:抗化学腐蚀的测定 Ceramic tiles - Part 13: Determination of chemical resistance |
| 45 | ISO 10545.14-1995 | 瓷砖第14部分:上釉面砖耐沾污性的测量 Ceramic tiles - Part 14: Determination of resistance to stains |
| 46 | ISO 10545.15-1995 | 瓷砖第十五部分:釉面砖镉含量测定 Ceramic tiles - Part 15: Determination of lead and cadmium given off by glazed tiles |
| 47 | ISO 10545.16-1999 | 瓷砖第16部分:细小色差的测定 Ceramic tiles - Part 16: Determination of small colour differences |
| 48 | ISO 10545.2-1995 | 瓷砖第二部分:表面质量和尺寸的测定 Ceramic tiles - Part 2: Determination of dimensions and surface quality |
| 49 | ISO 10545.3-1995 | 瓷砖第3部分:吸水率、外表孔隙率、外表相对密度和松密度的测量 Ceramic tiles - Part 3: Determination of water absorption apparent porosity apparent relative density and bulk density |
| 50 | ISO 10545.4-1994 | 瓷砖第4部分:断裂强度及破裂模数的测定 Ceramic Tiles - Part 4: Determination of Modulus of Rupture and Breaking Strength First Edition |
| 51 | ISO 10545.14 Technical Corrigendum 1-1997 | 瓷砖第14部分:上釉面砖耐沾污性的测量技术勘误表1 Ceramic tiles - Part 14: Determination of resistance to stains; Technical Corrigendum 1 |
| 52 | ISO 10545.2 Technical Corrigendum 1-1997 | 瓷砖第2部分:表面质量和尺寸的测定技术勘误表1 Ceramic tiles - Part 2: Determination of dimensions and surface quality; Technical Corrigendum 1 |
| 53 | ISO 10545.3 Technical Corrigendum 1-1997 | 瓷砖第3部分:吸水率、外表孔隙率、外表相对密度和松密度的测量技术勘误表1 Ceramic tiles - Part 3: Determination of water absorption apparent porosity apparent relative density and bulk density; Technical Corrigendum 1 |
| 54 | ISO 10545.5-1996 | 瓷砖第5部分:用复原系数测量法测定耐冲击特性 Ceramic tiles - Part 5: Determination of impact resistance by measurement of coefficient of restitution |
| 55 | ISO 10545.6-1995 | 瓷砖第11部分:无釉面砖抗极度磨损的测量 Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles |
| 56 | ISO 10545.7-1996 | 瓷砖第7部分:上釉瓷砖表面抗磨损性的测定 Ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles |
| 57 | ISO 10545.8-1994 | 瓷砖第8部分:线性热膨胀力的测定 Ceramic tiles - Part 8: Determination of linear thermal expansion |
| 58 | ISO 10545.9-1994 | 瓷砖第9部分:耐热冲击力的测定 Ceramic tiles - Part 9: Determination of resistance to thermal shock |
| 59 | ISO 10546-1993 | 化学变化保护层铝和铝合金上清洗和未清洗的铬酸盐变化保护层 Chemical Conversion Coatings - Rinsed and Non-Rinsed Chromate Conversion Coatings on Aluminium and Aluminium Alloys First Edition |
| 60 | ISO 10548-2002 | 碳纤维尺寸的测定 Carbon fibre - Determination of size content |
| 61 | ISO 10549-2000 | 缩微照相A6尺寸穿孔卡片 Micrographics - A6 Size Aperture Cards First Edition |
| 62 | ISO 10550-1994 | 缩微摄影技术行星上用照相机系统检验性能用试验目标 Micrographics - Planetary Camera Systems - Test Target for Checking Performance First Edition |
| 63 | ISO 10545.5 Technical Corrigendum 1-1997 | 瓷砖第5部分:用复原系数测量法测定耐冲击系性技术勘误表1 Ceramic tiles - Part 5: Determination of impact resistance by measurement of coefficient of restitution; Technical Corrigendum 1 |
| 64 | ISO 10551-1995 | 热环境中的人类工效学使用主观判断尺度对热环境影响的评定 Ergonomics of the Thermal Environment - Assessment of the Influence of the Thermal Environment Using Subjective Judgement Scales First Edition |
| 65 | ISO 1055-1975 | 锌和锌合金铁含量的测定分光光度法 Zinc and zinc alloys -- Determination of iron content -- Spectrophotometric method |
| 66 | ISO 10552-1999 | 控时设备帽和密封管设计和尺寸 Timekeeping Instruments - Crowns and Sealed Tubes - Designs and Dimensions First Edition |
| 67 | ISO 10555.1-1995 | 一次性使用、无菌管内导管第1部分:一般要求 Sterile Single-Use Intravascular Catheters - Part 1: General Requirements First Edition; CEN EN ISO 10 555-1: 1996; Amendment 1: 7/15/99; Amendment 2: 05/15/2004 |
| 68 | ISO 10555.2-1996 | 一次性使用、无菌管内导管第2部分:血管造影术用导管 Sterile Single-Use Intravascular Catheters - Part 2: Angiographic Catheters First Edition; Technical Corrigendum 1: 6/15/2002 |
| 69 | ISO 10555.3-1996 | 一次性使用、无菌管内导管第3部分:中心静脉导管 Sterile Single-Use Intravascular Catheters - Part 3: Central Venous Catheters First Edition; Corrigendum 1: 6/15/2002 |
| 70 | ISO 10555.1 AMD 1-1999 | 一次性使用、无菌管内导管第1部分:一般要求补充件1 Sterile single-use intravascular catheters - Part 1: General requirements; Amendment 1 |
| 71 | ISO 10555.2 Technical Corrigendum 1-2002 | 一次性使用无菌血管内导管第2部分:血管造影术用导管技术勘误1 Sterile single-use intravascular catheters - Part 2: Angiographic catheters; Technical Corrigendum 1 |
| 72 | ISO 10555.3 Technical Corrigendum 1-2002 | 一次性使用无菌血管内导管第3部分:中心静脉导管技术勘误1 Sterile single-use intravascular catheters - Part 3: Central venous catheters; Technical Corrigendum 1 |
| 73 | ISO 10553-2003 | Horology - Procedure for Evaluating the Accuracy of Quartz Watches First Edition |
| 74 | ISO 10555.4-1996 | 一次性使用、无菌管内导管第4部分:球形扩张导管 Sterile Single-Use Intravascular Catheters - Part 4: Balloon Dilatation Catheters First Edition; Corrigendum 1: 6/15/2002 |
| 75 | ISO 10555.5-1996 | 一次性使用、无菌管内导管第5部分:与针头相连的辅助导管 Sterile Single-Use Intravascular Catheters - Part 5: Over-Needle Peripheral Catheters First Edition; Amendment 1: 01/15/1999; Corrected and Reprinted 07/15/1999: Corrigendum 1: 6/15/2002 |
| 76 | ISO 10560-1993 | 奶乳和乳制品单核细胞增多性李司忒氏菌的检验 Milk and Milk Products - Detection of Listeria Monocytogenes First Edition; (Corrigendum 1-1994) |
| 77 | ISO 10563-1991 | 建筑结构接合用密封料测定重量和体积的变化 Building construction; sealants for joints; determination of change in mass and volume |
| 78 | ISO 10564-1993 | 软钎焊材料和硬焊材料软焊料分析取样方法 Soldering and Brazing Materials - Methods for the Sampling of Soft Solders for Analysis First Edition |
| 79 | ISO 10561-1999 | Information Technology - Office Equipment - Printing Devices - Method for Measuring Throughput - Class 1 and Class 2 Printers Second Edition |
| 80 | ISO 10555.5 AMD 1-1999 | 一次性使用、无菌管内导管第5部分:与针头相连的辅助导管补充件1 Sterile single-use intravascular catheters - Part 5: Over-needle peripheral catheters; Amendment 1 |
| 81 | ISO 10560 Technical Corrigendum 1-1994 | 奶乳和乳制品单核细胞增多性李司忒氏菌的检验技术勘误1 Milk and milk products; detection of listeria monocytogenes; technical corrigendum 1 |
| 82 | ISO 10555.4 Technical Corrigendum 1-2002 | 一次性使用无菌血管内导管第4部分:球形扩张导管技术勘误1 Sterile single-use intravascular catheters - Part 4: Balloon dilatation catheters; Technical Corrigendum 1 |
| 83 | ISO 10555.5 Technical Corrigendum 1-2002 | 一次性使用无菌血管内导管第5部分:与针头相连的外部导管技术勘误1 Sterile single-use intravascular catheters - Part 5: Over-needle peripheral catheters; Technical Corrigendum 1 |
| 84 | ISO 10565-1998 | 油料种子油和水分含量的同时测定脉冲核磁共振谱测定法 Oilseeds - Simultaneous Determination of Oil and Water Contents - Method Using Pulsed Nuclear Magnetic Resonance Spectrometry Second Edition |
| 85 | ISO 10566-1994 | 水质用邻苯二酚紫光谱测定法测定铝 Water Quality - Determination of Aluminium - Spectrometric Method Using Pyrocatechol Violet First Edition |
| 86 | ISO 10567-1992 | 土方机械液压挖掘机提升能力 Earth-Moving Machinery - Hydraulic Excavators - Lift Capacity First Edition; (Corrected and Reprinted - 1993) |
| 87 | ISO 10570-1992 | 土方机械活节框架锁性能要求 Earth-moving machinery - Articulated frame lock - Performance requirements |
| 88 | ISO 10571-1995 | 汽车起重机和类似特殊机械的轮胎 Tyres for Mobile Cranes and Similar Specialized Machines First Edition |
| 89 | ISO 10573-1995 | 土壤质量不饱和区域水含量的测定中子深度探测法 Soil Quality - Determination of Water Content in the Unsaturated Zone - Neutron Depth Probe Method First Edition |
| 90 | ISO 10574-1993 | 轻质碳氢化合物制冷液含液化气容器中液位的测量浮子式液位计 Refrigerated Light- Hydrocarbon Fluids - Measurement of Liquid Levels in Tanks Containing Liquefied Gases - Float-Type Level Gauges First Edition |
| 91 | ISO 10578-1992 | 技术制图定向和定位公差投影的公差带 Technical Drawings - Tolerancing of Orientation and Location - Projected Tolerance Zone First Edition |
| 92 | ISO 10579-1993 | 技术制图尺寸和公差非钢性部件 Technical Drawings - Dimensioning and Tolerancing - Non-Rigid Parts First Edition |
| 93 | ISO 10576.1-2003 | Statistical Methods - Guidelines for the Evaulation of Conformity with Specified Requirements - Part 1: General Principles First Edition |
| 94 | ISO 10583-1993 | ：航空航天流体动力系统管/配件组件试验方法 Aerospace Fluid Systems - Test Methods for Tube/Fitting Assemblies First Edition |
| 95 | ISO 10585-1996 | 信息和文献工作目录信息交换用亚美尼亚字母代码字符集 Information and Documentation - Armenian Alphabet Coded Character Set for Bibliographic Information Interchange First Edition |
| 96 | ISO 10586-1996 | 信息和文献工作目录信息交换用乔治亚字母代码字符集 Information and Documentation - Georgian Alphabet Coded Character Set for Bibliographic Information Interchange First Edition |
| 97 | ISO 10587-2000 | 金属和其它无机物覆层金属覆层和无覆层的外螺纹物体及棒材的残留物脆裂试验斜楔体法 Metallic and Other Inorganic Coatings - Test for Residual Embrittlement in both Metallic-Coated and Uncoated Externally-Threaded Articles and Rods - Inclined Wedge Method First Edition |
| 98 | ISO 10588-1993 | 信息技术X21/X21bis重复提供网络服务的开放系统互相连接模式对X25 包层协议的使用 Information Technology - Use of X25 Packet Layer Protocol in Conjunction with X21/X21 bis to Provide the OSI Connection-Mode Network Service First Edition; (CCITT RECMN X613) |
| 99 | ISO 10589-1992 | 信息技术系统间电信和信息交换与提供无连接式网络服务的协议一起使用的中间系统到中间系统内控发送信息交换协议 Information Technology - Telecommunications and Information Exchange Between Systems - Intermediate System to Intermediate System Intra-Domain Routeing Information Exchange Protocol for Use in Conjunction with the Protocol for Providing the Connectionles |
| 100 | ISO 10590-1991 | 建筑结构密封胶在维修和扩建时浸水后附着和粘聚性的测定 Building construction; sealants; determination of adhesion/cohesion properties at maintained extension after immersion in water |