| 序号 | 标准号 | 标准名称 |
 1 | ISO 9328.4-2004 | 压力容器用钢板和带材交货技术条件第4部分:正火、淬火和回火状态提供的具有高屈服应力的可焊细晶粒钢 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 4: Nickel-alloy steels with specified low temperature properties |
| 2 | ISO 9328.5-2004 | 压力容器用钢板和带材交货技术条件第5部分:奥氏体钢 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 5: Weldable fine grain steels thermomechanically rolled |
| 3 | ISO 9328.6-2004 | 压力用途的扁平钢材 交货技术条件 第7部分：淬火和回火的可焊接细晶粒钢 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 6: Weldable fine grain steels quenched and tempered |
| 4 | ISO 9316-1995 | 信息技术小型计算机系统接口-2 Information Technology - Small Computer System Interface-2 Second Edition |
| 5 | ISO 9318.2-1990 | 信息技术智能外围接口第2部分:磁盘驱动用装置特殊指令集 Information Technology - Intelligent Peripheral Interface Part 2: Device Specific Command Set for Magnetic Disk Drives First Edition |
| 6 | ISO 9318.3-1990 | 信息技术智能外围接口第3部分:磁盘和光盘驱动用装置总指令集 Information Technology - Intelligent Peripheral Interface Part 3: Device Generic Command Set for Magnetic and Optical Disk Drives First Edition |
| 7 | ISO 9318.4-1990 | 信息技术智能外围接口第4部分:磁带驱动用装置总指令集 Information Technology - Intelligent Peripheral Interface Part 4: Device Generic Command Set for Magnetic Tape Drives First Edition; CEN EN 29318-4: 1993 |
| 8 | ISO 93.2-1999 | 纺织机械和附件圆筒形条筒第2部分:弹簧底 Textile machinery and accessories -- Cylindrical sliver cans -- Part 2: Spring bottoms |
| 9 | ISO 9327.1-1999 | 压力用途的钢锻件和轧制或锻造的棒材技术交货条件第1部分:一般要求 Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 1: General requirements |
| 10 | ISO 9327.2-1999 | 压力用途的钢锻件和轧制或锻造的棒材技术交货条件第2部分:特定的提高温度特性的非合金和合金钢(钼镉和镉钼) Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy (Mo Cr and CrMo) steels with specified elevated temperature properties |
| 11 | ISO 9327.3-1999 | 压力用途的钢锻件和轧制或锻造的棒材技术交货条件第3部分:特定的提高温度特性的镍钢 Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 3: Nickel steels with specified low temperature properties |
| 12 | ISO 9316.2-2000 | Information Technology - Small Computer System Interface-2 (SCSI-2) - Part 2: Common Access Method (CAM) Transport and SCSI Interface Module First Edition |
| 13 | ISO 9318.4-2002 | Information Technology - Intelligent Peripheral Interface Part 4: Device Generic Command Set for Magnetic Tape Drives (IPI-3 Tape) Second Edition |
| 14 | ISO 9314.26-2001 | 信息技术光纤分布式数据接口(FDDI)第26部分:媒体访问控制符合性检测(MAC-ATS) Information Technology - Fibre Distributed Data Interface (FDDI) - Part 26: Media Access Control Conformance Testing (MAC-ATS) First Edition |
| 15 | ISO 9314.3-1990 | 信息处理系统光纤排列数据接口(FDDI)第3部分:物理层介质依附关系 Information Processing Systems - Fibre Distributed Data Interface (FDDI) - Part 3: Physical Layer Medium Dependent (PMD) First Edition; NZS/ISO/IEC 93143: 1990; CEN EN ISO/IEC 9314-3: 1995 |
| 16 | ISO 9314.5-1995 | 信息处理系统光纤排列数据接口(FDDI)第5部分:混合环控制 Information Technology - Fibre Distributed Data Interface (FDDI) - Part 5: Hybrid Ring Control (HRC) First Edition |
| 17 | ISO 9314.6-1998 | 信息技术光纤排列数据接口(FDDI)第6部分:站管理(SMT) Information Technology - Fibre Distributed Data Interface (FDDI) - Part 6: Station Management (SMT) First Edition |
| 18 | ISO 9314.7-1998 | 信息技术光纤排列数据接口(FDDI)第7部分:物理层协议(PHY-2) Information Technology - Fibre Distributed Data Interface (FDDI) - Part 7: Physical Layer Protocol (PHY-2) First Edition |
| 19 | ISO 9315-1989 | 信息处理系统盒式软磁盘机和它们的主机控制器间的接口 Information processing systems -- Interface between flexible disk cartridge drives and their host controllers |
| 20 | ISO 9314.25-1998 | Information Technology - Fibre Distributed Data Interface (FDDI) - Part 25: Abstract Test Suite for FDDI - Station Management Conformance Testing (SMT-ATS) First Edition |
| 21 | ISO 9314.4-1999 | Information Technology - Fibre Distributed Data Interface (FDDI) - Part 4: Single-Mode Fiber Physical Layer Medium Dependent (SMF-PMD) First Edition |
| 22 | ISO 9314.8-1998 | Information Technology - Fibre Distributed Data Interface (FDDI)- Part 8: Media Access Control-2 (MAC-2) First Edition |
| 23 | ISO 9314.9-2000 | Information Technology - Fibre Distributed Data Interface (FDDI) - Part 9: Low-Cost Fibre Physical Layer Medium Dependent (LCF-PMD) First Edition |
| 24 | ISO 931-1980 | 生香蕉贮存和运输指南 Green bananas -- Guide to storage and transport |
| 25 | ISO 93.1-1998 | 纺织机械和附件圆筒形条筒第1部分:主要尺寸 Textile machinery and accessories -- Cylindrical sliver cans -- Part 1: Main dimensions |
| 26 | ISO 9312-1990 | 电阻焊设备电极挡块的绝缘柱 Resistance welding equipment -- Insulated pins for use in electrode back-ups |
| 27 | ISO 9313-1989 | 接触点焊设备冷却管 Resistance spot welding equipment -- Cooling tubes |
| 28 | ISO 9314.1-1989 | 信息处理系统光纤排列数据的接口(FDDI)第1部分:物理层协议标记环(PHY) Information processing systems -- Fibre Distributed Data Interface (FDDI) -- Part 1: Token Ring Physical Layer Protocol (PHY) |
| 29 | ISO 9314.13-1998 | 信息技术光纤分布式数据接口(FDDI)第13部分:一致性测试协议实现一致性声明形式表 Information Technology - Fibre Distributed Data Interface (FDDI) - Part 13: Conformance Test Protocol Implementation Conformance Statement Proforma (CT-PICS) Proforma First Edition |
| 30 | ISO 9314.20-2001 | 信息技术光纤排列数据接口(FDDI)第20部分:FDDI物理介质相关合格试验用抽象试验套 Information Technology - Fibre Distributed Data Interface (FDDI) - Part 20: Abstract Test Suite for FDDI Physical Medium Dependent Conformance Testing (PMD ATS) First Edition |
| 31 | ISO 9314.21-2000 | 信息技术光纤排列数据接口(FDDI)第21部分:FDDI物理层协议一致性试验用抽象试验套 Information Technology - Fibre Distributed Data Interface (FDDI) - Part 21: Abstract Test Suite for FDDI Physical Layer Protocol Conformance Testing (PHY ATS) First Edition |
| 32 | ISO 9314.2-1989 | 信息处理系统光纤排列数据接口(FDDI)第2部分:中速存取控制器(MAC)标志环 Information processing systems -- Fibre Distributed Data Interface (FDDI) -- Part 2: Token Ring Media Access Control (MAC) |
| 33 | ISO 9311.3-2005 | 热塑管系统用粘接剂 第3部分：测定耐内压强度的试验方法 Adhesives for thermoplastic piping systems -- Part 3: Test method for the determination of resistance to internal pressure |
| 34 | ISO 9304-1989 | 受压力的无缝和焊(埋弧焊除外)接钢管用涡流法检验钢管缺陷 Seamless and Welded (Except Submerged Arc- Welded) Steel Tubes for Pressure Purposes - Eddy Current Testing for the Detection of Imperfections First Edition |
| 35 | ISO 9305-1989 | 受压力的无缝钢管用全周边超声波试验法检验横向缺陷 Seamless steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of transverse imperfections |
| 36 | ISO 9308.1-2000 | 水质大肠杆菌和大肠杆菌类的检测与计数第1部分:膜过滤法 Water quality -- Detection and enumeration of Escherichia coli and coliform bacteria -- Part 1: Membrane filtration method |
| 37 | ISO 9308.2-1990 | 水质大肠杆菌有机物、耐热大肠杆菌有机物和推定大肠杆菌的检测与计数第2部分:多管(最大可能数)法 Water quality -- Detection and enumeration of coliform organisms thermotolerant coliform organisms and presumptive Escherichia coli -- Part 2: Multiple tube (most probable number) method |
| 38 | ISO 9308.3-1998 | 水质表面和废水中大肠杆菌的检测和计数第3部分:液体介质中的小型接种法(最可能数目) Water quality -- Detection and enumeration of Escherichia coli and coliform bacteria in surface and waste water -- Part 3: Miniaturized method (Most Probable Number) by inoculation in liquid medium |
| 39 | ISO 9309-1989 | 冷冻压缩机性能数据的表示 Refrigerant compressors -- Presentation of performance data |
| 40 | ISO 9308.3 Technical Corrigendum 1-2000 | 水质表面和废水中大肠杆菌的检测和计数第3部分:液体介质中的小型接种法(最可能数目)技术勘误1 Water quality - Detection and enumeration of Escherichia coli and coliform bacteria in surface and waste water - Part 3: Miniaturized method (most probable number) by inoculation in liquid medium; Technical Corrigendum 1 |
| 41 | ISO 9310-1987 | 道路车辆压燃式(柴油)发动机的排气测量行驶中试验方法一览 Road vehicles; Smoke measurement of compression-ignition (diesel) engines; Survey of short in-service tests |
| 42 | ISO 9311.2-2002 | 热塑管道系统的胶粘剂第2部分:剪切强度的测定 Adhesives for thermoplastic piping systems -- Part 2: Determination of shear strength |
| 43 | ISO 9293-1994 | 信息技术信息交换用盒式光盘的容量和文档结构 Information Technology - Volume and File Structure of Disk Cartridges for Information Interchange Second Edition |
| 44 | ISO 9295-1988 | 声学测量由计算机和办公装置发出的高频噪声 Acoustics -- Measurement of high-frequency noise emitted by computer and business equipment |
| 45 | ISO 9296-1988 | 声学计算机和办公设备的申报噪声发射值 Acoustics -- Declared noise emission values of computer and business equipment |
| 46 | ISO 9297-1989 | 水质氯化物的测定用硝酸银指示剂滴定法 Water quality -- Determination of chloride -- Silver nitrate titration with chromate indicator (Mohrs method) |
| 47 | ISO 9298-1995 | 橡胶化合原料氧化锌试验方法 Rubber compounding ingredients -- Zinc oxide -- Test methods |
| 48 | ISO 9300-1990 | 用文杜利临界流量喷嘴测定气体流量 Measurement of gas flow by means of critical flow Venturi nozzles |
| 49 | ISO 930-1997 | 香料和调味品酸不溶性灰分的测定 Spices and condiments -- Determination of acid-insoluble ash |
| 50 | ISO 9302-1994 | 受压力的无缝和焊(埋弧焊除外)接钢管液压密封验证电磁试验法 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Electromagnetic testing for verification of hydraulic leak-tightness |
| 51 | ISO 9303-1989 | 受压力的无缝和焊(埋弧焊除外)接钢管用全周边超声波试验法检测纵向缺陷 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of longitudinal imperfections |
| 52 | ISO 9301-2003 | 孜然芹果油 Oil of cumin seed (Cuminum cyminum L) |
| 53 | ISO 928-1997 | 香料和调味品总灰分的测定 Spices and condiments -- Determination of total ash |
| 54 | ISO 9282.1-1988 | 信息处理图象的编码表示第1部分:7位或8位环境下图象表示的编码原则 Information processing; coded representation of pictures; part 1: encoding principles for picture representation in a 7-bit or 8-bit environment |
| 55 | ISO 9283-1998 | 操纵工业机器人性能指标和有关试验方法 Manipulating industrial robots -- Performance criteria and related test methods |
| 56 | ISO 9284-1992 | 磨料粒度筛分试验机 Abrasive grains -- Test-sieving machines |
| 57 | ISO 9285-1997 | 磨料颗粒和粗料熔氧化铝的化学分析 Abrasive grains and crude -- Chemical analysis of fused aluminium oxide |
| 58 | ISO 9286-1997 | 磨料颗粒和粗料碳化硅的化学分析 Abrasive grains and crude -- Chemical analysis of silicon carbide |
| 59 | ISO 9288-1989 | 热绝缘散热传递物理的量值和定义 Thermal insulation -- Heat transfer by radiation -- Physical quantities and definitions |
| 60 | ISO 9289-1991 | 油料种子残渣游离残留乙烷测定 Oilseed residues -- Determination of free residual hexane |
| 61 | ISO 9292-1988 | 锰矿石和锰精矿总铁含量的测定110 菲咯啉光度法 Manganese ores and concentrates -- Determination of total iron content -- 110-Phenanthroline spectrometric method |
| 62 | ISO 929-1980 | 香料和调味品水不溶性灰分的测定 Spices and condiments; Determination of water-insoluble ash |
| 63 | ISO 927-1982 | 香料和调味品外来杂质含量的测定 Spices and condiments -- Determination of extraneous matter content |
| 64 | ISO 9276.1-1998 | 粒度分析结果的表示第1部分:图形表示 Representation of results of particle size analysis -- Part 1: Graphical representation |
| 65 | ISO 9276.2-2001 | 颗粒尺寸分析结果的表示第2部分:从颗粒尺寸的分布对平均颗粒尺寸/直径的计算 Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions |
| 66 | ISO 9276.4-2001 | 颗粒尺寸分析结果的叙述第4部分:分类过程的描述 Representation of results of particle size analysis -- Part 4: Characterization of a classification process |
| 67 | ISO 9277-1995 | 通过气体吸收用Branauer、Emmet和Teller(BET)方法测定固体的比表面积 Determination of the specific surface area of solids by gas adsorption using the BET method |
| 68 | ISO 9278-1992 | 二氧化铀小球密度和开口孔隙率和隐孔孔隙率的测定沸水法和渗透浸渍法 Uranium dioxide pellets -- Determination of density and amount of open and closed porosity -- Boiling water method and penetration immersion method |
| 69 | ISO 9279-1992 | 二氧化铀小球密度和总孔隙率的测定水银排量法 Uranium dioxide pellets -- Determination of density and total porosity -- Mercury displacement method |
| 70 | ISO 9281.1-1990 | 信息技术图象编码法标识 Information Technology - Picture Coding Methods - Part 1: Identification First Edition; NZS/ISO/IEC 92811: 1990 |
| 71 | ISO 9281.2-1990 | 信息技术图象编码法第2部分:定位规程 Information Technology - Picture Coding Methods - Part 2: Procedure for Registration First Edition |
| 72 | ISO 9259-1991 | 客车雨刷系统刷臂与刷片连接器 Passenger cars -- Windscreen wiper systems -- Wiper arm-to-blade connections |
| 73 | ISO 9264-1988 | 木工机械具有滑台或滑架的窄皮带打光机术语 Woodworking machines -- Narrow belt sanding machines with sliding table or frame -- Nomenclature |
| 74 | ISO 9265-1988 | 木工机床多轴镗床术语 Woodworking machines -- Multi-spindle boring machines -- Nomenclature |
| 75 | ISO 9266-1988 | 木工机械通用工具及刀具的刃磨器术语 Woodworking machines -- Universal tool and cutter sharpeners -- Nomenclature |
| 76 | ISO 9267-1988 | 木工机械带锯刃磨机术语 Woodworking machines -- Bandsaw blade sharpening machines -- Nomenclature |
| 77 | ISO 9268-1988 | 外科植入物具有圆锥形底面头部的金属接骨螺钉尺寸 Implants for surgery -- Metal bone screws with conical under-surface of head -- Dimensions |
| 78 | ISO 9269-1988 | 外科植入物金属骨片符合具有锥形下表面螺钉的孔和槽 Implants for surgery -- Metal bone plates -- Holes and slots corresponding to screws with conical under-surface |
| 79 | ISO 9270-1992 | 自动换刀具的机床7/24锥柄主柚头锥度 7/24 tapers for tool shanks for automatic changing -- Tapers for spindle noses |
| 80 | ISO 9261-2004 | 农业灌溉设备喷射管系统规范和试验方法 Agricultural irrigation equipment -- Emitters and emitting pipe -- Specification and test methods |
| 81 | ISO 9249-1997 | 土方机械发动机的试验规程净功率 Earth-moving machinery -- Engine test code -- Net power |
| 82 | ISO 9251-1987 | 热绝缘材料的热传导条件和性能词汇 Thermal insulation -- Heat transfer conditions and properties of materials -- Vocabulary |
| 83 | ISO 925-1997 | 固体矿物燃料二氧化碳含量的测定重量分析法 Solid mineral fuels -- Determination of carbonate carbon content -- Gravimetric method |
| 84 | ISO 9252-1989 | 合成胶乳微生物的检验 Synthetic rubber latex -- Microbiological examination |
| 85 | ISO 9258-1989 | 客车刮水器刮水片长度 Passenger cars -- Wiper systems -- Wiper blade length |
| 86 | ISO 9254-1993 | 航空航天 强度等级小于或等于1100MPa有涂层或无涂层金属材料制成的标准直径或中径柄长MJ螺纹普通在键头螺栓 尺寸 Aerospace -- Bolt normal spline head normal or pitch diameter shank long length MJ threads metallic material coated or uncoated strength classes less than or equal to 1 100 MPa -- Dimensions |
| 87 | ISO 9255-1993 | 航空航天 强度等级小于或等于1100MPa有涂层或无涂层金属材料制成的标准柄短或中等长度MJ螺纹普通在键头螺栓尺寸 Aerospace -- Bolts normal spline head normal shank short or medium length MJ threads metallic material coated or uncoated strength classes less than or equal to 1 100 MPa -- Dimensions |
| 88 | ISO 9256-1993 | 航空航天 强度等级小于等于1100MPa有涂层或无涂层金属材料制成标准直径或中径柄长MJ螺纹大六角头螺栓 尺寸 Aerospace -- Bolts large hexagonal head normal or pitch diameter shank long length MJ threads metallic material coated or uncoated strength classes less than or equal to 1 100 MPa -- Dimensions |
| 89 | ISO 9259 AMD 1-2001 | 客车挡风玻璃清洁系统清洁臂对刮片的尺寸修改件1 Passenger cars - Windscreen wiper systems - Wiper arm-to-blade connections; Amendment 1 |
| 90 | ISO 9242-1988 | 夹扭钳和剪切钳建筑工人的夹钳尺寸和试验值 Pliers and Nippers - Construction Workers Pincers - Dimensions and Test Values First Edition (AS/NZS 405610: 1992) |
| 91 | ISO 9243-1988 | 夹扭钳和剪扭钳细木工的夹钳尺寸和试验值 Pliers and nippers -- Carpenters pincers -- Dimensions and test values |
| 92 | ISO 9244-1995 | 土方机械安全信号和危险图形符号的一般性能 Earth-moving machinery - Safety signs and hazard pictorials - General principles |
| 93 | ISO 9245-1991 | 土方机械机器生产率词汇、符号和单位 Earth-moving machinery -- Machine productivity -- Vocabulary symbols and units |
| 94 | ISO 9246-1988 | 土方机械履带式和轮式拖拉机的推土机刮板容积额定值 Earth-moving machinery -- Crawler and wheel tractor dozer blades -- Volumetric ratings |
| 95 | ISO 9247-1990 | 土方机械电线和电缆识别和标记原则 Earth-Moving Machinery - Electrical Wires and Cables - Principles of Identification and Marking First Edition; Amendment 1: 12/15/1998 |
| 96 | ISO 9248-1992 | 土方机械尺寸单位、性能、容量和它们的测量精度 Earth-moving machinery -- Units for dimensions performance and capacities and their measurement accuracies |
| 97 | ISO 9247 AMD 1-1998 | 土方机械电线和电缆识别和标志原则第1次修订 Earth-moving machinery - Electrical wires and cables - Principles of identification and marking; Amendment 1 |
| 98 | ISO 9249 Technical Corrigendum 1-1999 | 土方机械引擎试验规则净功率技术勘误1 Earth-moving machinery - Engine test code - Net power; Technical Corrigendum 1 |
| 99 | ISO 9241.3-1992 | 具有可视显示终端(VDTs)的办公室工作的人类工效学要求第3部分:可视显示要求 Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 3: Visual display requirements |
| 100 | ISO 9241.4-1998 | 办公用视觉显示终端(VDTs)的人类工效学要求第4部分:键盘要求 Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 4: Keyboard requirements |