| 序号 | 标准号 | 标准名称 |
 1 | ISO 9661-1994 | 信息技术127毫米盒式磁带上的数据交换每毫米18磁道1491数据字节 Information Technology - Data Interchange on 127 mm Wide Magnetic Tape Cartridges - 18 Tracks 1 491 Data Bytes per Millimetre Second Edition |
| 2 | ISO 9662-1994 | 飞机设备机上设备的环境和操作条件湿度温度和压力试验 Aircraft equipment -- Environmental and operating conditions for airborne equipment -- Humidity temperature and pressure tests |
| 3 | ISO 9660-1988 | 信息处理信息交换用CD-ROM的卷和文件结构 Information processing -- Volume and file structure of CD-ROM for information interchange |
| 4 | ISO 9654-2004 | 电子工程用夹扭钳和剪切钳单一用途钳剪切钳 Pliers and nippers for electronics -- Single-purpose nippers -- Cutting nippers |
| 5 | ISO 9655-2004 | 电子工程用夹扭钳和剪切钳专用夹扭钳夹紧和控制用夹扭钳 Pliers and nippers for electronics -- Single-purpose pliers -- Pliers for gripping and manipulating |
| 6 | ISO 9656-2004 | 电子工程用夹扭钳和剪切钳试验方法 Pliers and nippers for electronics -- Test methods |
| 7 | ISO 9657-2004 | 电子工程用夹扭钳和剪切钳一般技术要求 Pliers and nippers for electronics -- General technical requirements |
| 8 | ISO 965.1-1998 | 一般用途米制螺纹公差第1部分:原则和基本数据 ISO general-purpose metric screw threads -- Tolerances -- Part 1: Principles and basic data |
| 9 | ISO 965.2-1998 | 一般用途米制螺纹公差第2部分:一般用途的内螺纹和外螺纹的尺寸限制中等质量 ISO general purpose metric screw threads -- Tolerances -- Part 2: Limits of sizes for general purpose external and internal screw threads -- Medium quality |
| 10 | ISO 9652.2-2000 | 砖石工程第2部分:根据普通规则设计的未增强的砖石工程 Masonry -- Part 2: Unreinforced masonry design by simple rules |
| 11 | ISO 9652.4-2000 | 砖石工程第4部分:试验方法 Masonry -- Part 4: Test methods |
| 12 | ISO 9652.5-2000 | 砖石工程第5部分:词汇 Masonry -- Part 5: Vocabulary |
| 13 | ISO 9653-1998 | 粘合剂粘合剂粘结的剪切冲击强度试验方法 Adhesives -- Test method for shear impact strength of adhesive bonds |
| 14 | ISO 965.3-1998 | 一般用途米制螺纹公差第2部分:结构螺纹的偏差 ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads |
| 15 | ISO 9650.1-2005 | 小艇 气胀式救生筏 第1部分：1型 Small craft -- Inflatable liferafts -- Part 1: Type I |
| 16 | ISO 9650.2-2005 | 小艇 气胀式救生筏 第2部分：2型 Small craft -- Inflatable liferafts -- Part 2: Type II |
| 17 | ISO 9650.3-2005 | 小艇 气胀式救生筏 第3部分：材料 Small craft -- Inflatable liferafts -- Part 3: Material |
| 18 | ISO 9646.1-1994 | 信息技术开放系统互连一致性试验法和框架第1部分:一般概念 Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 1: General Concepts Second Edition; CEN EN 29646-1: 1992; CAN/CSA-ISO/IEC 9646-1-95 CEN EN ISO/IEC 9646-1: 1996 |
| 19 | ISO 9646.2-1994 | 信息技术开放系统互连一致性试验法和框架第2部分:抽象试验套件规范 Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 2: Abstract Test Suite Specification Second Edition; CAN/CSA-ISO/IEC-9646-2-95; CEN EN ISO/IEC 9646-2: 1996 |
| 20 | ISO 9646.3-1998 | 信息技术开式系统互连合格试验方法和框架第3部分:树形和表格混合记数法 Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 3: The Tree and Tabular Combined Notation (TTCN) Second Edition |
| 21 | ISO 9646.4-1994 | 信息技术开放系统互连一致性试验法和框架第4部分:试验实现 Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 4: Test Realization Second Edition; CAN/CSA-ISO/IEC 9646-4-95; CEN EN ISO/IEC 9646-4: 1996 |
| 22 | ISO 9646.5-1994 | 信息技术开放系统互连一致性试验法和框架第5部分:合格评定过程用实验室和用户要求 Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 5: Requirements on Test Laboratories and Clients for the Conformance Assessment Process Second Edition; CAN/CSA-ISO/IEC 9646-5-95; CEN EN ISO/IEC |
| 23 | ISO 9646.6-1994 | 信息技术开放系统互连一致性试验法和框架第6部分:协议界面试验规范 Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 6: Protocol Profile Test Specification First Edition; CEN EN ISO/IEC 9646-6: 1996 |
| 24 | ISO 9646.7-1995 | 信息技术开放系统互连一致性试验法和框架第7部分:实现一致性声明 Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 7: Implementation Conformance Statements First Edition; Corrigendum 1 04/01/1997 |
| 25 | ISO 9647-1989 | 钢和铁钒含量的测定火焰原子吸收光谱(分析)法 Steel and iron -- Determination of vanadium content -- Flame atomic absorption spectrometric method |
| 26 | ISO 9648-1988 | 高粱鞣酸含量的测定 Sorghum -- Determination of tannin content |
| 27 | ISO 9649-1990 | 金属材料金属丝反复扭转试验 Metallic materials -- Wire -- Reverse torsion test |
| 28 | ISO 9642-1993 | 电影技术每秒2425和30画面电影摄制系统的时间和控制码规范 Cinematography -- Time and control code for 24 25 and 30 frames per second motion-picture systems -- Specifications |
| 29 | ISO 9644-1993 | 农业灌溉设备灌溉阀压力损失试验方法 Agricultural irrigation equipment -- Pressure losses in irrigation valves -- Test method |
| 30 | ISO 9645-1990 | 声学两轮式机动自行车行驶时发出噪声的测定工程法 Acoustics -- Measurement of noise emitted by two-wheeled mopeds in motion -- Engineering method |
| 31 | ISO 9636.5-1991 | Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 5: Input and Echoing First Edition |
| 32 | ISO 9636.6-1991 | Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 6: Raster First Edition |
| 33 | ISO 9637.1-1994 | Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Data Stream Binding - Part 1: Character Encoding First Edition |
| 34 | ISO 9637.2-1992 | Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Data Stream Binding - Part 2: Binary Encoding First Edition |
| 35 | ISO 9638.3-1994 | Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Language Bindings - Part 3: Ada First Edition |
| 36 | ISO 9644 AMD 1-1998 | 农业灌溉设备灌溉阀压力损失试验方法修改件1 Agricultural irrigation equipment - Pressure losses in irrigation valves - Test method; Amendment 1 |
| 37 | ISO 9626-1991 | 医疗器件制造用不锈钢针状管材 Stainless steel needle tubing for the manufacture of medical devices |
| 38 | ISO 9628-1992 | 滚动轴承镶入轴承和偏心锁套圈 Rolling bearings -- Insert bearings and eccentric locking collars |
| 39 | ISO 9633-2001 | 自行车链特性和试验方法 Cycle chains -- Characteristics and test methods |
| 40 | ISO 9635-1990 | 灌溉设备液压操纵灌溉阀 Irrigation equipment -- Hydraulically operated irrigation valves |
| 41 | ISO 9634-1994 | 航空航天 流体系统 塑料保护罩及管堵的尺寸 Aerospace -- Fluid systems -- Dimensions of plastic protective caps and plugs |
| 42 | ISO 9636.1-1991 | Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 1: Overview Profiles and Conformance First Edition |
| 43 | ISO 9636.2-1991 | Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 2: Control First Edition |
| 44 | ISO 9636.3-1991 | Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 3: Output First Edition |
| 45 | ISO 9631-2003 | 橡胶密封件最高温度为110℃的热水供给管道的密封环材料规范 Rubber seals -- Joint rings for pipelines for hot-water supply up to 110 degrees C -- Specification for the material |
| 46 | ISO 9619-1992 | 客车挡风玻璃刮水系统试验方法 Passenger cars -- Windscreen wiping systems -- Test method |
| 47 | ISO 962-1974 | 信息处理9 磁道宽127mm(05in)磁带7位编码字符集及其7位和8位扩大字符集的执行过程 Information processing -- Implementation of the 7- bit coded character set and its 7- bit and 8-bit extensions on 9- track 127 mm (05 in) magnetic tape |
| 48 | ISO 96.2-1992 | 纺织机械和附件环绽纺纱和环绽捻线的钢领圈和钢丝圈第2部分:HZCH型、HZ型和J型钢领圈和相应钢丝圈 Textile machinery and accessories -- Rings and travellers for ring spinning and ring doubling frames -- Part 2: HZCH- HZ- and J-rings and their appropriate travellers |
| 49 | ISO 9622-1999 | 全脂牛奶牛奶脂肪、蛋白质和乳糖含量的测定中级红外设备操作指南 Whole milk -- Determination of milkfat protein and lactose content -- Guidance on the operation of mid-infrared instruments |
| 50 | ISO 9623-1997 | 负压流体用聚乙烯(PE)/金属和聚丙烯(PP)/金属加减装置螺纹的设计长度和尺寸米制系列 PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure -- Design lengths and size of threads -- Metric series |
| 51 | ISO 9624-1997 | 负压流体用热塑性塑料管法兰衔接器和可置换衬板法兰的适配尺寸 Thermoplastics pipes for fluids under pressure -- Mating dimensions of flange adapters and loose backing flanges |
| 52 | ISO 9625-1993 | 溉灌用聚乙烯压力管机械连接配件 Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes |
| 53 | ISO 9626 AMD 1-2001 | 医疗装置生产用不锈钢针管修改件1 Stainless steel needle tubing for the manufacture of medical devices; Amendment 1 |
| 54 | ISO 9619 AMD 1-2002 | 客车挡风玻璃刮水系统试验方法修改件1 Passenger cars - Windscreen wiping systems - Test methods; Amendment 1 |
| 55 | ISO 9612-1997 | 声学暴露在工作场中的噪音的测量和评定导则 Acoustics -- Guidelines for the measurement and assessment of exposure to noise in a working environment |
| 56 | ISO 9613.1-1993 | 声学室外声传播衰减第1部分:大气吸收声音的计算 Acoustics -- Attenuation of sound during propagation outdoors -- Part 1: Calculation of the absorption of sound by the atmosphere |
| 57 | ISO 9613.2-1996 | 声学室外声传播衰减第2部分:计算的一般方法 Acoustics -- Attenuation of sound during propagation outdoors -- Part 2: General method of calculation |
| 58 | ISO 9614.1-1993 | 声学利用声音强度测定噪声源功率级第1部分:离散点测量 Acoustics -- Determination of sound power levels of noise sources using sound intensity -- Part 1: Measurement at discrete points |
| 59 | ISO 9614.2-1996 | 声学利用声音强度测定噪声源功率级第2部分:扫描测量法 Acoustics -- Determination of sound power levels of noise sources using sound intensity -- Part 2: Measurement by scanning |
| 60 | ISO 9615-1989 | 木工机械带有液压夹紧装置的木丝用立式切碎机命名法 Woodworking machines -- Vertical shredding machines for wood wool production with hydraulic clamping -- Nomenclature |
| 61 | ISO 9616-1989 | 木工机械建筑基地用圆锯机命名法 Woodworking machines -- Circular sawing machines for building sites -- Nomenclature |
| 62 | ISO 9617-1989 | 木工机械平行升降台和台架命名法 Woodworking machines -- Lifting tables and stages -- Nomenclature |
| 63 | ISO 9618-1996 | 航空航天带MJ螺纹的高度降低的标准十字形平头有槽(齿形)六角头螺母级别:450MPa(室温下)/120℃、450MPa(室温下)/235℃、600MPa(室温下)/425℃、900MPa(室温下)/235℃、900MPa(室温下)/315℃、900MPa(室温下)/650℃、1100MPa(室温下)/235℃、1100MPa(室温下)/730℃、1250MPa Aerospace-Nuts Hex Slotted (Castellated) Red Hght Norm Across Flats With MJ Threads Cls: 450MPa (at Ambient Temp)/120 Deg C450MPa (at Ambient Temp)/235 Deg C 600MPa(at Ambient Temp)/425 Deg C 900MPa( |
| 64 | ISO 9614.3-2002 | 声学利用声音强度测定噪声源功率级第3部分:扫描测量精度法 Acoustics -- Determination of sound power levels of noise sources using sound intensity -- Part 3: Precision method for measurement by scanning |
| 65 | ISO 9606.1-1994 | 焊工的验收试验熔焊第1部分:钢 Approval testing of welders -- Fusion welding -- Part 1: Steels |
| 66 | ISO 9606.3-1999 | 焊工的验收试验熔焊第3部分:铜和铜合金 Approval testing of welders -- Fusion welding -- Part 3: Copper and copper alloys |
| 67 | ISO 9606.4-1999 | 焊工的验收试验熔焊第4部分:镍和镍合金 Approval testing of welders -- Fusion welding -- Part 4: Nickel and nickel alloys |
| 68 | ISO 9606.5-2000 | 焊工的验收试验熔焊第5部分:钛和钛合金锆和锆合金 Approval testing of welders -- Fusion welding -- Part 5: Titanium and titanium alloys zirconium and zirconium alloys |
| 69 | ISO 9608-1994 | V型皮带皮带的均匀性中心距离的变化的测定用试验方法 V-belts -- Uniformity of belts -- Test method for determination of centre distance variation |
| 70 | ISO 9609-1996 | 航空航天 在大气压力为450 MPa(室温为120℃)时、在大气压力为450 MPa(室温为235℃)时、在大气压力为600 MPa(室温为425℃)时、在大气压力为900 MPa(室温为235℃)时、在大气压力为900 MPa(室温为315℃)时、在大气压力为900 MPa(室温为650℃)时、在大气压力为1100 MPa(室温为2 Aerospace - Nuts Hexagonal Plain Reduced Height Normal Across Flats with MJ Threads Classifications: 450 MPa (at Ambient Temp)/120 Deg C 450 MPa (at Ambient Temp)/235 Deg C 600 MPa (at Ambient Temp)/425 Deg C 900 MP |
| 71 | ISO 9611-1996 | 声学关于相关结构声辐射的结构噪声的声源特性记述弹性联接时机械装置在接触点的声速测量 Acoustics -- Characterization of sources of structure-borne sound with respect to sound radiation from connected structures -- Measurement of velocity at the contact points of machinery when resiliently mounted |
| 72 | ISO 9606.2 AMD 1-1998 | 焊工的验收试验熔焊第2部分:铝和铝合金修改件1 Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys; Amendment 1 |
| 73 | ISO 9606.2-2004 | 焊工的考核试验 熔焊 第2部分：铝及铝合金 Qualification test of welders -- Fusion welding -- Part 2: Aluminium and aluminium alloys |
| 74 | ISO 9594.8-2001 | 信息技术开放系统互连目录:公开密钥和属性认证框架 Information Technology - Open Systems Interconnection - The Directory: Public-Key and Attribute Certificate Frameworks Fourth Edition; Corrigendum 2: 12/01/2002 |
| 75 | ISO 9594.9-1998 | 信息技术开放系统互连目录复制 Information Technology - Open Systems Interconnection - The Directory: Replication Second Edition; Corrigendum 1: 3/01/2002 |
| 76 | ISO 9596.1-1998 | 信息技术开放系统互连一般管理信息协议第1部分:规范 Information Technology - Open Systems Interconnection - Common Management Information Protocol - Part 1: Specification Third Edition; Technical Corrigendum 1: 12/15/1999; Corrigendum 2: 12/01/2002 |
| 77 | ISO 9596.2-1993 | 信息技术开放系统互连普通管理信息协议第2部分:协议实现一致性声明形式(PICS) Information Technology - Open Systems Interconnection - Common Management Information Protocol: Protocol Implementation Conformance Statement (PICS) Proforma First Edition; Technical Corrigendum 1: 06/15/1993; Technical Corrigendum 2: 12/15/1996; Technic |
| 78 | ISO 9597-1989 | 水泥试验方法凝固时间及坚实度的测定 Cements -- Test methods -- Determination of setting time and soundness |
| 79 | ISO 9598-1989 | 受压力的无缝钢管横向缺陷检验用全周边磁换能器铁涂氧磁管漏检验 Seamless steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections |
| 80 | ISO 9599-1991 | 铜、铅和硫化锌精矿在分析样品中湿存水的测定重量法 Copper lead and zinc sulfide concentrates -- Determination of hygroscopic moisture in the analysis sample -- Gravimetric method |
| 81 | ISO 9595-1998 | Information Technology - Open Systems Interconnection - Common Management Information Service Third Edition |
| 82 | ISO 9606.1 AMD 1-1998 | 焊工的验收试验熔焊第1部分:钢修改件1 Approval testing of welders - Fusion welding - Part 1: Steels; Amendment 1 |
| 83 | ISO 9594.9-2001 | 信息技术开放系统互连目录复制 Information Technology - Open Systems Interconnection - The Directory: Replication Third Edition |
| 84 | ISO 9594.3-1998 | 信息技术开放系统互连目录:抽象服务定义 Information Technology - Open Systems Interconnection - The Directory: Abstract Service Definition Third Edition; Corrigendum 1: 3/01/2002 |
| 85 | ISO 9594.4-1998 | 信息技术开放系统互连目录:分布式操作程序 Information Technology - Open Systems Interconnection - The Directory: Procedures for Distributed Operation Third Edition; Technical Corrigendum 1 - 12/15/2001 |
| 86 | ISO 9594.5-2001 | 信息技术开放系统互连目录协议规范 Information Technology - Open Systems Interconnection - The Directory: Protocol Specifications Fourth Edition; Technical Corrigendum 2: 8/15/2002 |
| 87 | ISO 9594.6-1998 | 信息技术开放系统互连目录:选择随机型 Information Technology - Open Systems Interconnection - The Directory: Selected Attribute Types Third Edition; Technical Corrigendum 1: 12-15-2001 |
| 88 | ISO 9594.7-1998 | 信息技术开放系统互连目录选择目标类别 Information Technology - Open Systems Interconnection - The Directory: Selected Object Classes Third Edition |
| 89 | ISO 9594.2-2001 | 信息技术开放系统互连目录:模型 Information Technology - Open Systems Interconnection - The Directory: Models Fourth Edition |
| 90 | ISO 9594.3-2001 | 信息技术开放系统互连目录:抽象服务定义 Information Technology - Open Systems Interconnection - The Directory: Abstract Service Definition Fourth Edition |
| 91 | ISO 9594.4-2001 | 信息技术开放系统互连目录:分布式操作程序 Information Technology - Open Systems Interconnection - The Directory: Procedures for Distributed Operation Fourth Edition |
| 92 | ISO 9594.6-2001 | 信息技术开放系统互连目录:选择随机型 Information Technology - Open Systems Interconnection - The Directory: Selected Attribute Types Fourth Edition; Technical Corrigendum 1: 3/01/2003 |
| 93 | ISO 9594.7-2001 | 信息技术开放系统互连目录选择目标类别 Information Technology - Open Systems Interconnection - The Directory: Selected Object Classes Fourth Edition |
| 94 | ISO 959.2-1998 | 胡椒(胡椒科)胡椒粒和粉规范第1部分:黑胡椒 Pepper (Piper nigrum L) whole or ground -- Specification -- Part 2: White pepper |
| 95 | ISO 9592.2-1997 | 信息技术计算机制图和图像处理三维图形系统第2部分:档案文档格式 Information Technology - Computer Graphics and Image Processing - Programmers Hierarchical Interactive Graphics System (PHIGS) - Part 2: Archive File Format Second Edition |
| 96 | ISO 9592.3-1997 | 信息技术计算机制图和图像处理三维图形系统第3部分:档案文档的明码编码规范 Information Technology - Computer Graphics and Image Processing - Programmers Hierarchical Interactive Graphics System (PHIGS) - Part 3: Specification for Clear-Text Encoding of Archive File Second Edition |
| 97 | ISO 9593.1-1990 | 信息处理系统计算机制图程序员的交互制图系统(PHIGS)语言汇编第1部分:FIORTRAN语言 Information Processing Systems - Computer Graphics - Programmers Hierarchical Interactive Graphics System (PHIGS) Language Bindings - Part 1: FORTRAN First Edition; Corrigendum 1-1993; Corrigendum 2-1994; Amendment 1- 1995; NZS/ISO/IEC 95931: 1990 |
| 98 | ISO 9593.3-1990 | 信息技术计算机制图程序员分层交互制图系统语言汇集第3部分:自动数据采集程序(ADA) Information Technology - Computer Graphics - Programmers Hierarchical Interactive Graphics System (PHIGS) Language Bindings - Part 3: Ada First Edition; Amendment 1-1994; Corrigendum 1-1993; Corrigendum 2-1994 |
| 99 | ISO 9593.4-1991 | 信息技术计算机制图三维图形系统语言汇编第4部分:C语言 Information Technology - Computer Graphics - Programmers Hierarchical Interactive Graphics System (PHIGS) Language Bindings - Part 4: C First Edition; Amendment 1: 05-01-1994; Technical Corrigendum 1: 08-01-1994; Amendment 2: Incorporation of PHIGS Amen |
| 100 | ISO 9594.10-1998 | 信息技术开放系统互连目录:目录管理用系统管理的使用 Information Technology - Open Systems Interconnection - The Directory - Part 10: Use of Systems Management for Administration of the Directory First Edition; Corrigendum 1 5/1/2002 |