| 序号 | 标准号 | 标准名称 |
 1 | ISO 104-2002 | 滚动轴承止推轴承 外形尺寸总体设计图 Rolling bearings -- Thrust bearings -- Boundary dimensions general plan |
| 2 | ISO 10420-1994 | 石油和天然气工业海底和海上提升用柔性管道系统 Petroleum and Natural Gas Industries - Flexible Pipe Systems for Subsea and Marine Riser Applications First Edition |
| 3 | ISO 10416-2002 | 石油和天然气工业钻用冲洗液实验室试验 Petroleum and natural gas industries Drilling fluids Laboratory testing First Edition |
| 4 | ISO 10418-2003 | 石油和天然气工业海上作业平台基本表面安全系统的分析、设计、装配和检验 Petroleum and natural gas industries Offshore production installations Basic surface process safety systems Second Edition |
| 5 | ISO 1042-1998 | 实验室玻璃器皿单列刻度量瓶 Laboratory glassware -- One-mark volumetric flasks |
| 6 | ISO 10422-1993 | 石油和天燃气工业套管输油管和管道螺纹的车销、标定和螺纹检验规范 Petroleum and natural gas-industries; threading gauging and thread inspection of casing tubing and line pipe threads; specification |
| 7 | ISO 10423-2001 | 石油和天然气工业钻井和开采设备井口设施和采油树设备 Petroleum and Natural Gas Industries - Drilling and Production Equipment - Wellhead and Christmas Tree Equipment Second Edition |
| 8 | ISO 10426.1-2000 | 石油和天然气工业井水泥灌浆用水泥和材料第1部分:规范 Petroleum and Natural Gas Industries - Cements and Materials for Well Cementing - Part 1: Specification First Edition: Amendment 1 8/01/2002 |
| 9 | ISO 10424.1 | (Pending)Petroleum and Natural Gas Industries - Rotary Drilling Equipment - Part 1: Specification for Rotary Drilling Equipment First Edition |
| 10 | ISO 10424-2 | (Pending)Petroleum and Natural Gas Industries - Rotary Drilling Equipment - Part 2: Threading Gauging and Testing of Rotary Shouldered Threaded Connections First Edition |
| 11 | ISO 10426.1 AMD 1-2002 | 石油和天然气工业油井固井用水泥和材料第1部分:规范修改1 v |
| 12 | ISO 10425-2003 | Steel wire ropes for the petroleum and natural gas industries Minimum requirements and terms of acceptance First Edition |
| 13 | ISO 10426.2-2003 | Petroleum and natural gas industries Cements and materials for well cementing Part 2: Testing of well cements First Edition |
| 14 | ISO 10423-2003 | 石油和天然气工业钻井和开采设备井口设施和采油树设备 Petroleum and Natural Gas Industries - Drilling and Production Equipment - Wellhead and Christmas Tree Equipment Third Edition |
| 15 | ISO 10427.1-2001 | 石油和天然气工业套管扶正器第1部分:弓形弹簧式套管扶正器 Petroleum and Natural Gas Industries - Equipment for Well Cementing - Part 1: Casing Bow-Spring Centralizers First Edition /Cobranded with API Spec 10D; Corrected Version 10-01-2003 |
| 16 | ISO 10428 | 石油和天然气工业抽油杆(短抽油杆光杆联接器和分联接器)规范 (Pending)Petroleum and Natural Gas Industries - Sucker Rods (Pony Rods Polished Rods Couplings and Sub-Couplings) - Specification Second Edition |
| 17 | ISO 10428-1993 | 石油和天然气工业抽油杆(短抽油杆光杆联接器和分联接器)规范 Petroleum and Natural Gas Industries - Sucker Rods (Pony Rods Polished Rods Couplings and Sub-Couplings) - Specification First Edition |
| 18 | ISO 10431 | 石油和天然气工业泵送装置规范 (Pending)Petroleum and Natural Gas Industries - Pumping Units - Specification Second Edition |
| 19 | ISO 10431-1993 | 石油和天然气工业泵送装置规范 Petroleum and Natural Gas Industries - Pumping Units - Specification First Edition |
| 20 | ISO 10427.2 | (Pending)Petroleum and Natural Gas Industries - Casing Centralizers - Part 2: Recommended Practice for Centralizer Placement and Stop Collar Testing First Edition |
| 21 | ISO 10427.3-2003 | Petroleum and Natural Gas Industries - Equipment for Well Cementing - Part 3: Performance Testing of Cementing Float Equipment First Edition |
| 22 | ISO 10426.3-2003 | Petroleum and natural gas industries Cements and materials for well cementing Part 3: Testing of deepwater well cement formulations First Edition |
| 23 | ISO 10426.4-2004 | Petroleum and natural gas industries Cements and materials for well cementing Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure First Edition |
| 24 | ISO 10427.2-2004 | Petroleum and natural gas industries Equipment for well cementing Part 2: Centralizer placement and stop-collar testing First Edition; Together with ISO 10427-1 and ISO 10427-3 Replaces ISO 10427:1993 |
| 25 | ISO 1043.1-2001 | 塑料符号和缩略术语第1部分:基本聚合物及其特性 Plastics -- Symbols and abbreviated terms -- Part 1: Basic polymers and their special characteristics |
| 26 | ISO 1043.2-2000 | 塑料符号和缩略语第2部分:填充剂及加强材料 Plastics -- Symbols and abbreviated terms -- Part 2: Fillers and reinforcing materials |
| 27 | ISO 1043.3-1996 | 塑料符号和缩略语第3部分:增塑剂 Plastics -- Symbols and abbreviated terms -- Part 3: Plasticizers |
| 28 | ISO 10434-1998 | 石油和天然气工业用螺栓帽状钢闸阀 Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries First Edition |
| 29 | ISO 1043.4-1998 | 塑料符号和缩略语第4部分:阻燃剂 Plastics -- Symbols and abbreviated terms -- Part 4: Flame retardants |
| 30 | ISO 10436 | 石油和天然气工业炼油厂用通用蒸汽轮机设备 (Pending)Petroleum and Natural Gas Industries - General-Purpose Steam Turbines Second Edition |
| 31 | ISO 10436-1993 | 石油和天然气工业炼油厂用通用蒸汽轮机设备 Petroleum and Natural Gas Industries - General-Purpose Steam Turbines for Refinery Service First Edition |
| 32 | ISO 10437-1993 | 石油和天然气工业炼油厂用专用蒸汽涡轮机设备 Petroleum and Natural Gas Industries - Special-Purpose Steam Turbines for Refinery Service First Edition |
| 33 | ISO 10432-1999 | Petroleum and Natural Gas Industries - Downhole Equipment - Subsurface Safety Valve Equipment Second Edition |
| 34 | ISO 10437-2003 | 石油和天然气工业炼油厂用专用蒸汽涡轮机设备 Petroleum petrochemical and natural gas industries Steam turbines Special-purpose applications Second Edition |
| 35 | ISO 10440.1-2000 | 石油和天然气工业转式容积式压缩机第1部分:过程压缩机(无油) Petroleum and Natural Gas Industries - Rotary-Type Positive-Displacement Compressors - Part 1: Process Compressors (Oil-Free) First Edition |
| 36 | ISO 10440.2-2001 | 石油和天然气工业旋转型容积式压缩机第2部分:封装的空气压缩机(无油) Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) |
| 37 | ISO 10441 | 石油和天然气工业机械动力传输用挠性联轴器专用设施 (Pending)Petroleum and Natural Gas Industries - Flexible Couplings for Mechanical Power Transmission - Special Purpose Applications Second Edition |
| 38 | ISO 10441-1999 | 石油和天然气工业机械动力传输用挠性联轴器专用设施 Petroleum and Natural Gas Industries - Flexible Couplings for Mechanical Power Transmission - Special Purpose Applications First Edition |
| 39 | ISO 1044-1993 | 工业用运货车铅酸牵引蓄电池组优选电压 Industrial trucks -- Lead-acid traction batteries for electric trucks -- Preferred voltages |
| 40 | ISO 10439-2002 | 石油、化学和气体工业离心压缩机 Petroleum Chemical and Gas Service Industries - Centrifugal Compressors First Edition; Corrected Version 06/15/2003 |
| 41 | ISO 10438.1-2003 | (Draft)Petroleum petrochemical and natural gas industries Lubrication shaft-sealing and control-oil systems and auxiliaries Part 1: General requirements |
| 42 | ISO 10438.2-2003 | (Draft)Petroleum petrochemical and natural gas industries Lubrication shaft-sealing and control-oil systems and auxiliaries Part 2: Special-purpose oil systems First Edition |
| 43 | ISO 10438.3-2003 | (Draft)Petroleum petrochemical and natural gas industries Lubrication shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems First Edition |
| 44 | ISO 10438.4-2003 | (Draft)Petroleum petrochemical and natural gas industries Lubrication shaft-sealing and control-oil systems and auxiliaries Part 4: Self-acting gas seal support systems First Edition |
| 45 | ISO 10444-1994 | 信息和文献国际标准技术报告号码(ISRN) Information and Documentation - International Standard Technical Report Number (ISRN) First Edition |
| 46 | ISO 10446-1990 | 焊接耐腐蚀铬和铬镍钢涂药焊条分类用全焊接金属试验组件 Welding - All-Weld Metal Test Assembly for the Classification of Corrosion-Resisting Chromium and Chromium- Nickel Steel Covered Arc Welding Electrodes First Edition; (Corrected and Reprinted - 1991) |
| 47 | ISO 10447-1991 | 焊接点焊凸焊和有缝焊的剥离和凿剥离试验 Welding - Peel and Chisel Testing of Resistance Spot Projection and Seam Welds First Edition |
| 48 | ISO 10448-1994 | 农用拖拉机器具用液压动力 Agricultural Tractors - Hydraulic Pressure for Implements First Edition |
| 49 | ISO 10451-2002 | 牙科植入系统技术文件内容 Dental implant system - Contents of technical file |
| 50 | ISO 10454-1993 | 卡车和公共汽车轮胎校验轮胎性能实验室试验法 Truck and Bus Tyres - Verifying Tyre Capabilities - Laboratory Test Methods First Edition |
| 51 | ISO 10455-1992 | 道路车辆采用旋转式高压配电器的干燥点火线圈 Road Vehicles - Dry Ignition Coils Using Rotating High-Voltage Distributor First Edition |
| 52 | ISO 10456-1999 | 建筑材料和制品确定申报和设计热值的程序 Building materials and products - Procedures for determining declared and design thermal values |
| 53 | ISO 10442-2002 | 石油、化学和气体设备工业包装的整体式齿轮分离空气压缩机 Petroleum Chemical and Gas Service Industries Packaged Integrally Geared Centrifugal Air Compressors First Edition |
| 54 | ISO 10457-2002 | 纺织机械染整机械公称速度 Textile machinery Dyeing and finishing machines Nominal speeds Second Edition |
| 55 | ISO 10470-1993 | 生咖啡缺陷参考图 Green Coffee - Defect Reference Chart First Edition |
| 56 | ISO 10472.1-1997 | 工业洗涤机械的安全要求第1部分:常规要求 Safety Requirements for Industrial Laundry Machinery - Part 1: Common Requirements First Edition |
| 57 | ISO 10472.2-1997 | 工业洗衣设备的安全要求第2部分:洗衣机和洗衣脱水机 Safety Requirements for Industrial Laundry Machinery - Part 2: Washing Machines and Washer-Extractors First Edition |
| 58 | ISO 10472.3-1997 | 工业洗涤机械的安全要求第5部分:包括组件机械的洗衣槽线 Safety Requirements for Industrial Laundry Machinery - Part 3: Washing Tunnel Lines Including Component Machines First Edition |
| 59 | ISO 10472.4-1997 | 工业洗涤机械的安全要求第4部分:空气干燥器 Safety Requirements for Industrial Laundry Machinery - Part 4: Air Dryers First Edition |
| 60 | ISO 10472.5-1997 | 工业洗涤机械的安全要求第5部分:平板熨衣机进料机和折叠机 Safety Requirements for Industrial Laundry Machinery - Part 5: Flatwork Ironers Feeders and Folders First Edition |
| 61 | ISO 10472.6-1997 | 工业洗涤机械的安全要求第6部分:熨压及熔压 Safety Requirements for Industrial Laundry Machinery - Part 6:Ironing and Fusing Presses First Edition |
| 62 | ISO 10473-2000 | 环境空气过滤介质上颗粒物质质量的测定β射线吸收法 Ambient Air - Measurement of the Mass of Particulate Matter on a Filter Medium - Beta-Ray Absorption Method First Edition |
| 63 | ISO 10474-1991 | 钢和钢制品检验文件 Steel and Steel Products - Inspection Documents First Edition; (Corrected and Reprinted - 1992) |
| 64 | ISO 10471-2003 | Glass-reinforced thermosetting plastics (GRP) pipes Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions First Edition |
| 65 | ISO 10475-1992 | 无内胎轮胎阀门和有内胎轮胎阀门阀门及其部件的识别系统 Valves for Tubeless Tyres and Valves for Tubes - Identification System for Valves and Their Components First Edition |
| 66 | ISO 10477-1992 | 牙科学高聚物基的牙冠和齿桥材料 Dentistry - Polymer-Based Crown and Bridge Materials First Edition; Amendment 1-1998 |
| 67 | ISO 10478-1994 | 石油产品燃料油中铝和硅含量测定感应耦合等离子体发散和原子吸收光谱分析法 Petroleum Products - Determination of Aluminium and Silicon in Fuel Oils - Inductively Coupled Plasma Emission and Atomic Absorption Spectroscopy Methods First Edition |
| 68 | ISO 10483.2-1996 | 道路车辆智能动力开关第2部分:低侧智能动力开关 Road vehicles - Intelligent power switches - Part 2: Low-side intelligent power switch |
| 69 | ISO 10484-1997 | 螺母的加宽试验 Widening Test on Nuts First Edition |
| 70 | ISO 10485-1991 | 锥形螺母的负荷试验 Cone Proof Load Test on Nuts First Edition |
| 71 | ISO 10486-1992 | 客车客车无线电设备识别号(CRIN) Passenger Cars - Car Radio Identification Number (CRIN) First Edition |
| 72 | ISO 10483.1-1993 | Road Vehicles - Intelligent Power Switches - Part 1: High-Side Intelligent Power Switch First Edition |
| 73 | ISO 10477 AMD 1-1998 | 牙科学聚合物基的牙冠和齿桥材料修改件1 Dentistry - Polymer-based crown and bridge materials; Amendment 1 |
| 74 | ISO 10483.1-2004 | Road vehicles Intelligent power switches Part 1: High-side intelligent power switch Second Edition |
| 75 | ISO 10487.1-1992 | 小轿车收音机连接件第1部分:尺寸及一般要求 Passenger Car Radio Connections - Part 1: Dimensions and General Requirements First Edition |
| 76 | ISO 10487.2-1995 | 客车汽车收音机连接第2部分:性能要求 Passenger Cars - Connections for Car Radios - Part 2: Performance Requirements First Edition |
| 77 | ISO 1049-1975 | 松散物料的连续机械装卸设备矩形和梯形输送槽的振动式输送机和喂料机 Continuous mechanical handling equipment for loose bulk materials -- Vibrating conveyors and feeders with rectangular or trapezoidal trough |
| 78 | ISO 10494-1993 | 燃气轮机和燃气轮机组气载噪音的测量工程测量方法 Gas Turbines and Gas Turbine Sets - Measurement of Emitted Airborne Noise - Engineering/Survey Method First Edition |
| 79 | ISO 10497-1992 | 阀门试验防火试验要求 Testing of Valves - Fire Type-Testing Requirements First Edition |
| 80 | ISO 10499-1991 | 工业用轮胎和轮辋充气胎轮辋用实心轮胎(米制系列)名称、尺寸和标记 Industrial Tyres and Rims - Solid Tyres (Metric Series) for Pneumatic Tyre Rims - Designation Dimensions and Marking First Edition; Corrigendum 1-1997 |
| 81 | ISO 10499 Technical Corrigendum 1-1997 | 工业用轮胎和轮辋充气胎轮辋用实心轮胎(米制系列)名称、尺寸和标记技术勘误表1 Industrial tyres and rims - Solid tyres (metric series) for pneumatic tyre rims - Designation dimensions and marking; Technical Corrigendum 1 |
| 82 | ISO 10499.1 Technical Corrigendum 1-1997 | 工业车辆轮胎和轮辋充气轮胎轮辋用实心轮胎(米制系列)第1部分:命名、尺寸和标记技术勘误1 Industrial tyres and rims - Solid tyres (metric series) for pneumatic tyre rims - Part 1: Designation dimensions and marking; Technical Corrigendum 1 |
| 83 | ISO 10499-1-1991 | 工业车辆轮胎和轮辋充气轮胎轮辋用实心轮胎(米制系列)第1部分:命名、尺寸和标记 Industrial tyres and rims - Solid tyres (metric series) for pneumatic tyre rims - Part 1: Designation dimensions and marking |
| 84 | ISO 10498-2004 | Ambient air Determination of sulfur dioxide Ultraviolet fluorescence method First Edition |
| 85 | ISO 10499.2-1998 | 工业用轮胎和轮辋充气胎轮辋用橡胶实心轮胎(米制系列)第2部分:荷载额定值 Industrial Tyres and Rims - Rubber Solid Tyres (Metric Series) for Pneumatic Tyre Rims - Part 2: Load Ratings First Edition |
| 86 | ISO 10500-1991 | 工业用轮胎和轮辋圆柱基和圆锥基橡胶实心轮胎(米制系列)命名、尺寸和标志 Industrial Tyres and Rims - Cylindrical and Conical Base Rubber Solid Tyres (Metric Series) - Designation Dimensions and Marking First Edition |
| 87 | ISO 1050-1975 | 松散物料的连续机械装卸设备螺旋式输送机 Continuous mechanical handling equipment for loose bulk materials -- Screw conveyors |
| 88 | ISO 10502-1992 | 航空航天最大温度为230℃气压为10500KPa条件下使用的聚四氟乙烯(PTFE)软管组件获得规范 Aerospace - Hose Assemblies in Polytetrafluoroethylene (PTFE) for Use up to 232 Degrees C and 10 500 kPa - Procurement Specification First Edition |
| 89 | ISO 10503-1991 | 摄影技术一次性反光照相闪光灯阵列光通量/时间特性要求和定义 Photography - Expendable Reflectored Photoflash Lamp Arrays - Definitions and Requirements for Luminous Flux/Time Characteristics First Edition |
| 90 | ISO 10504-1998 | 淀粉衍生物葡萄糖浆、果糖浆和氢化葡萄糖浆的组成测定高效液相法 Starch Derivatives - Determination of the Composition of Glucose Syrups Fructose Syrups and Hydrogenated Glucose Syrups - Method Using High-Performance Liquid Chromatography First Edition |
| 91 | ISO 10508-1995 | 输送热水和冷水系统的热塑性塑料管道及其配件 Thermoplastics Pipes and Fittings for Hot and Cold Water Systems First Edition |
| 92 | ISO 10509-1992 | 六角凸缘头自攻螺钉 Hexagon Flange Head Tapping Screws First Edition (AS/NZS 4410: 1996) |
| 93 | ISO 10510-1999 | 带有水平垫圈的攻螺丝螺纹和垫圈组件 Tapping Screw and Washer Assemblies with Plain Washers First Edition |
| 94 | ISO 10511-1997 | 经常作用的扭矩型六角薄螺母(带有非金属插入物) Prevailing Torque Type Hexagon Thin Nuts (with Non-Metallic Insert) First Edition |
| 95 | ISO 1051-1999 | 铆钉杆直径 Rivet shank diameters |
| 96 | ISO 10512-1997 | 带米制细牙间距螺纹的、类型1、经常作用的扭矩型六角螺母(带有非金属插入物)特性等级68和10 Prevailing Torque Type Hexagon Nuts (with Non-Metallic Insert) Style 1 with Metric Fine Pitch Thread - Property Classes 6 8 and 10 First Edition |
| 97 | ISO 10517-1993 | 手提式电动树篱修剪机定义机械安全要求和试验 Portable Powered Hedge Trimmers - Definitions Mechanical Safety Requirements and Tests First Edition |
| 98 | ISO 10518-1991 | 手扶式草地修剪机和草地边缘修剪机机械的安全要求和试验方法 Powered Walk-Behind and Hand-Held Lawn Trimmers and Lawn Edge Trimmers - Mechanical Safety Requirements and Test Methods First Edition; (Corrected and Reprinted - 1991) (Amendment 1-1994) |
| 99 | ISO 10519-1997 | 油菜种子叶绿素含量测定光谱法 Rapeseed - Determination of Chlorophyll Content - Spectrometric Method Second Edition |
| 100 | ISO 10514.1-1996 | Information Technology - Programming Languages - Part 1: Modula-2 Base Language First Edition |