| 序号 | 标准号 | 标准名称 |
 1 | ISO 17526-2003 | Optics and optical instruments Lasers and laser-related equipment Lifetime of lasers First Edition |
| 2 | ISO 17555-2003 | Plastics Film and sheeting Biaxially oriented polypropylene (PP) films First Edition |
| 3 | ISO 17556-2003 | Plastics Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved First Edition |
| 4 | ISO 17557-2003 | Plastics Film and sheeting Cast polypropylene (PP) films First Edition |
| 5 | ISO 17560-2002 | 表面化学分析再生离子质量的光谱测定硅中硼的深仿形方法 Surface Chemical Analysis - Secondary-ion Mass Spectrometry - Method for Depth Profiling of Boron in Silicon First Edition |
| 6 | ISO 17561-2002 | 精细陶瓷(高级陶瓷、高级工业陶瓷)室温下通过声共振对整块陶瓷弹性模量的试验方法 Fine Ceramics (Advanced Ceramics Advanced Technical Ceramics) - Test Method for Elastic Moduli of Monolithic Ceramics at Room Temperature by Sonic Resonance First Edition |
| 7 | ISO 1756-1975 | 工业用运货车台架尺寸接合部位的量规 Industrial trucks -- Dimensions of stillages -- Connection gauge |
| 8 | ISO 17562-2001 | 精细陶瓷(高级陶瓷、高级工程陶瓷)用推杆技术测定整体陶瓷线性热膨胀的试验方法 Fine Ceramics (Advanced Ceramics Advanced Technical Ceramics) - Test Method for Linear Thermal Expansion of Monolithic Ceramics by Push-Rod Technique First Edition |
| 9 | ISO 17564-2001 | 丁腈橡胶用碘值测定氢化丁腈橡胶残留不饱和物 Nitrile Rubber - Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value First Edition |
| 10 | ISO 1757-1996 | 人体摄影辐射剂量计 Personal photographic dosemeters |
| 11 | ISO 17591-2002 | 林业机械关节式吊杆原木装车机识别术语、分类和元件命名 Machinery for forestry Knuckleboom log loaders Identification terminology classification and component nomenclature First edition |
| 12 | ISO 17559-2003 | ydraulic fluid power Electrically controlled hydraulic pumps Test methods to determine performance characteristics First Edition |
| 13 | ISO 17565-2003 | Fine ceramics (advanced ceramics advanced technical ceramics) Test method for flexural strength of monolithic ceramics at elevated temperature First Edition |
| 14 | ISO 17567-2005 | Agricultural and forestry tractors and implements -- Hydraulic power beyond |
| 15 | ISO 1762-2001 | 纸、纸板和纸浆在525℃燃烧时残留物(灰分)的测定 Paper board and pulps -- Determination of residue (ash) on ignition at 525 degrees C |
| 16 | ISO 17631-2002 | 船舶和航海技术防火船板、救生器具和疏散设施 Ships and Marine Technology - Shipboard Plans for Fire Protection Life-Saving Appliances and Means of Escape First Edition; Corrigendum 1: 6/15/2002 |
| 17 | ISO 1763-1986 | 地毯单位长度和单位面积簇绒和/或毛圈数目的测定 Carpets -- Determination of number of tufts and/or loops per unit length and per unit area |
| 18 | ISO 17613 | (Pending)Manually Operated Hand Pumps First Edition |
| 19 | ISO 17604-2003 | Microbiology of Food and Animal Feeding Stuffs - Carcass Sampling for Microbiological Analysis First Edition |
| 20 | ISO 17635-2003 | Non-destructive testing of welds General rules for fusion welds in metallic materials First edition |
| 21 | ISO 17612-2004 | Tractors and machinery for agriculture and forestry Auxiliary-power transmission connector for the operator station First Edition |
| 22 | ISO 17624-2004 | Acoustics Guidelines for noise control in offices and workrooms by means of acoustical screens First Edition |
| 23 | ISO 176-2005 | 塑料增塑剂损耗的测定活性碳法 Plastics -- Determination of loss of plasticizers -- Activated carbon method |
| 24 | ISO 17632-2004 | Welding consumables -- Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels -- Classification |
| 25 | ISO/TTA 1-1994 | Advanced technical ceramics -- Unified classification system |
| 26 | ISO/TTA 2-1997 | Tensile tests for discontinuously reinforced metal matrix composites at ambiant temperatures |
| 27 | ISO/TTA 3-2001 | Polycrystalline materials -- Determination of residual stresses by neutron diffraction |
| 28 | IWA 1-2001 | 质量管理体系保健组织工作改进导则 Quality management systems -- Guidelines for process improvements in health service organizations |
| 29 | IWA 2-2003 | 质量管理体系 教育行业应用ISO 9001:2000指南 Quality management systems - Guidelines for the application of ISO 9001:2000 in education |
| 30 | ISO/TS 9941-2003 | Milk and canned evaporated milk Determination of tin content Spectrometric method Also see IDF/RM 160 |
| 31 | ISO/TTA 4-2002 | Measurement of thermal conductivity of thin films on silicon substrates |
| 32 | ISO/TS 6090-2004 | Milk and dried milk buttermilk and buttermilk powder whey and whey powder Detection of phosphatase activity First Edition IDF/RM 82:2004(E) |
| 33 | ISO/TS 8611.2-2005 | 货物联运用普通平托盘试验方法 Pallets for materials handling -- Flat pallets -- Part 2: Performance requirements and selection of tests |
| 34 | ISO/TS 7821-2005 | 烟草来自同一批量等同样品的配制和组成(为鉴定试验方法共同研究的实用便览 Tobacco and tobacco products -- Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods |
| 35 | ISO/TS 22763-2002 | 农作物保护设备喷射装置田间农作物喷射器示范轨道 Crop protection equipment -Sprayers - Demonstration track for field crop sprayers |
| 36 | ISO/TS 24348-2003 | Ophthalmic optics Spectacle frames Method for the simulation of wear and detection of nickel release from coated metal and combination spectacle frames First Edition |
| 37 | ISO/TS 4949-2003 | 以字母符号组成的钢牌号 Steel names based on letter symbols First Edition |
| 38 | ISO/TS 29001-2003 | Petroleum petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations First Edition |
| 39 | ISO/TS 3632.1-2003 | Saffron (Crocus sativus L) Part 1: Specification First Edition: Replaces ISO 3632-1; 1993 |
| 40 | ISO/TS 3632.2-2003 | Saffron (Crocus sativus L) Part 2: Test methods First Edition: Replaces ISO 3632-2; 1993 |
| 41 | ISO/TS 22559.1-2004 | Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs) First Edition |
| 42 | ISO/TS 23081.1-2004 | Information and documentation Records management processes Metadata for records Part 1: Principles First Edition |
| 43 | ISO/TS 22476.11-2005 | Geotechnical investigation and testing -- Field testing -- Part 11: Flat dilatometer test |
| 44 | ISO/TS 20825-2003 | Road Vehicles - Drawbar Couplings Drawbar Eyes Fifth Wheel Kingpins Hook Couplins and Toroidal Eyes - Wear Limits for in-use Mecahanical Couplings First Edition |
| 45 | ISO/TS 20885-2003 | Gaseous media fire-extinguishing systems Area coverage fire test procedure Engineered and preengineered extinguishing units First Edition |
| 46 | ISO/TS 21849-2003 | Aircraft Integrated data processing materials management Bar coding |
| 47 | ISO/TS 21609-2003 | Road vehicles EMC guidelines for installation of aftermarket radio frequency transmitting equipment First Edition |
| 48 | ISO/TS 21667-2004 | Health informatics Health indicators conceptual framework First Edition |
| 49 | ISO/TS 21748-2004 | Guidance for the use of repeatability reproducibility and trueness estimates in measurement uncertainty estimation First Edition |
| 50 | ISO/TS 20646.1-2004 | Ergonomic procedures for the improvement of local muscular workloads Part 1: Guidelines for reducing local muscular workloads First Edition |
| 51 | ISO/TS 21749-2005 | Measurement and uncertainty for metrological applications -- Repeated measurements and nested experiments |
| 52 | ISO/TS 22476.10-2005 | Geotechnical investigation and testing -- Field testing -- Part 10: Weight sounding test |
| 53 | ISO/TS 21108-2005 | Hand-held power tools -- Impulse wrenches -- Dimensions and tolerances of interface to power socket |
| 54 | ISO/TS 20225-2001 | 管理数据交换用全球医疗装置术语 Global medical device nomenclature for the purpose of regulatory data exchange |
| 55 | ISO/TS 20625-2002 | 行政、商业和运输业的电子数据交换在推行行政、商业和运输业的电子数据交换导则的基础上 XML 图解文件(XSD)生成规则 Electronic data interchange for administration commerce and transport (EDIFACT) - Rules for generation of XML scheme files (XSD) on the basis of EDI(FACT) implementation guidelines |
| 56 | ISO/TS 20119-2002 | 道路车辆中心管理量化的试验方法直线驱动离差矩阵的测定 Road vehicles - Test methods for the quantification of on-centre handling - Determination of dispersion metrics for straight-line driving |
| 57 | ISO/TS 18876.1-2003 | Industrial automation systems and integration Integration of industrial data for exchange access and sharing Part 1: Architecture overview and description First Edition |
| 58 | ISO/TS 18876.2-2003 | Industrial automation systems and integration Integration of industrial data for exchange access and sharing Part 2: Integration and mapping methodology First Edition |
| 59 | ISO/TS 18308-2004 | Health informatics Requirements for an electronic health record architecture First Edition |
| 60 | ISO/TS 19979-2004 | Ophthalmic optics Contact lenses Hygienic management of multipatient use trial contact lenses First Edition |
| 61 | ISO/TS 18173-2005 | 无损检测 一般术语与定义 Non-destructive testing -- General terms and definitions |
| 62 | ISO/TS 19127-2005 | Geographic information -- Geodetic codes and parameters |
| 63 | ISO/TS 17764.1-2002 | 动物饲料脂肪酸含量的测定第1部分:甲酯的制备 Animal feeding stuffs - Determination of the content of fatty acids - Part 1: Preparation of methyl esters |
| 64 | ISO/TS 17450.2-2002 | 产品几何量技术规范(GPS)一般概念第2部分:基本原则、规范、操作者和不确定度 Geometrical product specifications (GPS) General concepts Part 2: Basic tenets specifications operators and uncertainties First Edition |
| 65 | ISO/TS 17764.2-2002 | 动物饲料脂肪酸含量的测定第2部分:气相色谱法 Animal Feeding Stuffs - Determination of the Content of Fatty Acids - Part 2: Gas Chromatographic Method First Edition |
| 66 | ISO/TS 17262-2003 | Automatic vehicle and equipment identification Intermodal goods transport Numbering and data structures First Edition |
| 67 | ISO/TS 17263-2003 | Automatic vehicle and equipment identification Intermodal goods transport System parameters First Edition |
| 68 | ISO/TS 17573-2003 | Road Transport and Traffic Telematics Electronic Fee Collection (EFC) Systems architecture for vehicle related transport services First Edition |
| 69 | ISO/TS 17477-2003 | Acceptance Tests for CO2-Laser Beam Machines for Welding and Cutting Using 2D Moving Optics Type First Edition |
| 70 | ISO/TS 17576-2004 | Dentistry Corrosion tests for amalgam First Edition |
| 71 | ISO/TS 17261-2005 | Intelligent transport systems - Automatic vehicle and equipment identification -- Intermodal good transport architecture and terminology |
| 72 | ISO/TS 17117-2002 | 保健信息受控的保健术语结构和先进指示器 Health informatics - Controlled health terminology - Structure and high-level indicators |
| 73 | ISO/TS 17090.1-2002 | Health Informatics - Public Key Infrastructure - Part 1: Framework and Overview First Edition |
| 74 | ISO/TS 17090.2-2002 | Health Informatics - Public Key Infrastructure - Part 2: Certificate Profile First Edition |
| 75 | ISO/TS 17090.3-2002 | Health Informatics - Public Key Infrastructure - Part 3: Policy Management of Certification Authority First Edition |
| 76 | ISO/TS 17226-2003 | Leather Chemical tests Determination of formaldehyde content First edition; IULTCS/IUC 19 |
| 77 | ISO/TS 17234-2003 | Leather Chemical tests Determination of certain azo colourants in dyed leathers First edition; IULTCS/IUC 20 |
| 78 | ISO/TS 16951-2004 | Road vehicles Ergonomic aspects of transport information and control systems (TICS) Procedures for determining priority of on-board messages presented to drivers First Edition |
| 79 | ISO/TS 16668-2000 | 基本语义学索引 Basic Semantics Register (BSR) |
| 80 | ISO/TS 16799-1999 | 滚动轴承动力额定负荷和额定寿命基本动力额定负荷计算中的不连续性 Rolling bearings - Dynamic load ratings and rating life - Discontinuities in the calculating of basic dynamic load ratings |
| 81 | ISO/TS 16922-2002 | 天然气添味气体用导则 Natural gas - Guidelines for odorizing gases |
| 82 | ISO/TS 16949-2002 | 质量管理体系汽车生产和有关服务的部分组织应用ISO 9001:2000的特殊要求 Quality management systems - Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations |
| 83 | ISO/TS 16528-2002 | 锅炉和压力容器促进国际认可的代码和标准的注册 Boilers and pressure vessels - Registration of Codes and Standards to promote international recoggnition |
| 84 | ISO/TS 16630-2003 | Metallic Materials - Method of Hole Expanding Test First Edition |
| 85 | ISO/TS 16628-2003 | Tracheobronchial tubes Recommendations for size designation and labelling First Edition |
| 86 | ISO/TS 16949-2003 | 质量系统自动供应器ISO 9001:1994应用的特殊要求 Quality management systems Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations Second Edition; Corrected and Reprinted |
| 87 | ISO/TS 15768-2000 | 明渠中液体流速的测量电磁流量计的设计、选择和使用 Measurement of liquid velocity in open channels - Design selection and use of electromagnetic current meters |
| 88 | ISO/TS 15769-2000 | 比重测定明渠和部分填充管里的液体流多普勒流量计应用导则 Hydrometric determinations - Liquid flow in open channels and partly filled pipes - Guidelines for the application of Doppler-based flow measurements |
| 89 | ISO/TS 15843-2000 | 保健产品的消毒辐射消毒检定剂量试验、消毒剂量审计和消毒剂量审计频率用产品系列和取样计划 Sterilization of health care products - Radiation sterilization - Product families and sampling plans for verification dose experiments and sterilization dose audits and frequency of sterilization dose audits |
| 90 | ISO/TS 16071-2003 | Ergonomics of Human-System Interaction - Guidance on Accessibility for Human-Computer Interfaces First Edition |
| 91 | ISO/TS 16431-2002 | 液压传动配件系统清洁度的鉴定 Hydraulic fluid power - Assembled systems - Verification of cleanliness |
| 92 | ISO/TS 15874.7-2003 | Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity First Edition |
| 93 | ISO/TS 15875.7-2003 | Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity First Edition |
| 94 | ISO/TS 15876.7-2003 | Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity First Edition |
| 95 | ISO/TS 15877.7-2003 | Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 7: Guidance for the assessment of conformity First Edition |
| 96 | ISO/TS 16312.1-2004 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria First Edition |
| 97 | ISO/TS 15079-2001 | 机动草坪机具以及园艺设备操作者控制设备操作动力、位移、方位和方法指南 Powered lawn garden and horticultural equipment - Operator controls - Guidance on actuating forces displacement location and methods of operation |
| 98 | ISO/TS 15539-2000 | 心脏脉管植入物内脉管修复 Cardiovascular implants - Endovascular prostheses |
| 99 | ISO/TS 15624-2001 | 运输信息和控制系统交通事故警报系统(TIWS)系统要求 Transport information and control systems - Traffic Impediment Warning Systems (TIWS) - System requirements |
| 100 | ISO/TS 15696-2000 | 起重机等同术语表 Cranes - List of equivalent termes |