| 序号 | 标准号 | 标准名称 |
 1 | ISO/TS 15874.7-2003 | Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity First Edition |
| 2 | ISO/TS 15875.7-2003 | Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity First Edition |
| 3 | ISO/TS 15876.7-2003 | Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity First Edition |
| 4 | ISO/TS 15877.7-2003 | Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 7: Guidance for the assessment of conformity First Edition |
| 5 | ISO/TS 16312.1-2004 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria First Edition |
| 6 | ISO/TS 15079-2001 | 机动草坪机具以及园艺设备操作者控制设备操作动力、位移、方位和方法指南 Powered lawn garden and horticultural equipment - Operator controls - Guidance on actuating forces displacement location and methods of operation |
| 7 | ISO/TS 15539-2000 | 心脏脉管植入物内脉管修复 Cardiovascular implants - Endovascular prostheses |
| 8 | ISO/TS 15624-2001 | 运输信息和控制系统交通事故警报系统(TIWS)系统要求 Transport information and control systems - Traffic Impediment Warning Systems (TIWS) - System requirements |
| 9 | ISO/TS 15696-2000 | 起重机等同术语表 Cranes - List of equivalent termes |
| 10 | ISO/TS 15077-2002 | Tractors and Self-Propelled Machinery for Agriculture and Forestry - Operator Controls - Actuating Forces Displacement Location and Method of Operation First Edition |
| 11 | ISO/TS 15666-2003 | Acoustics - Assessment of Noise Annoyance by Means of Social and Socio-Acoustic Surveys First Edition |
| 12 | ISO/TS 15510-2003 | Stainless Steels - Chemical Composition First Edition |
| 13 | ISO/TS 15530.3-2004 | Geometrical Product Specifications (GPS) Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Part 3: Use of calibrated workpieces or standards First Edition |
| 14 | ISO/TS 15694-2004 | Mechanical vibration and shock Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system First Edition |
| 15 | ISO/TS 15007.2-2001 | 道路车辆驾驶员对运输信息和控制系统的可视行为的测量第2部分:设备和程序 Road vehicles Measurement of driver visual behaviour with respect to transport information and control systems Part 2: Equipment and procedures First Edition |
| 16 | ISO/TS 14904-2002 | 道路运输和交通远程信息管理电子收费操作员之间清算用接口规范 Road transport and traffic telematics - Electronic fee collection (AFC) - Interface specification for clearing between operators |
| 17 | ISO/TS 14934.1-2002 | 对火反应的试验辐射计和热通量仪的校准和使用第1部分:通则 Reaction-to-fire tests - Calibration and use of radiometers and heat flux meters - Part 1: General principles |
| 18 | ISO/TS 15000.1-2004 | Electronic business eXtensible Markup Language (ebXML) Part 1: Collaboration-protocol profile and agreement specification (ebCPP) First Edition |
| 19 | ISO/TS 15000.2-2004 | Electronic business eXtensible Markup Language (ebXML) Part 2: Message service specification (ebMS) First Edition |
| 20 | ISO/TS 15000.3-2004 | Electronic business eXtensible Markup Language (ebXML) Part 3: Registry information model specification (ebRIM) First Edition |
| 21 | ISO/TS 15000.4-2004 | Electronic business eXtensible Markup Language (ebXML) Part 4: Registry services specification (ebRS) First Edition |
| 22 | ISO/TS 14907.1-2005 | Road transport and traffic telematics -- Electronic fee collection -- Test procedures for user and fixed equipment -- Part 1: Description of test procedures |
| 23 | ISO/TS 14423-1999 | 用于铝生产的含碳材料冷压糊通过喹啉萃取和测定集料尺寸分布来测定有效粘接剂含量和集料含量 Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Determination of effective binder content and aggregate content by extraction with quinoline and determination of aggregate size distribution |
| 24 | ISO/TS 14425-1999 | 用于铝生产的含碳材料冷压糊未焙烤糊料的挥发物含量的测定 Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Determination of volatile-matter content of unbaked pastes |
| 25 | ISO/TS 14569.1-1999 | 牙科材料磨损抗性的试验指南第1部分:刷牙的磨损 Dental materials - Guidance on testing of wear resistance - Part 1: Wear by tooth brushing |
| 26 | ISO/TS 14798-2000 | 升降机(电梯)、电梯和乘客传送带风险分析方法 Lifts (elevators) escalators and passenger conveyors - Risk analysis methodology |
| 27 | ISO/TS 14815-2000 | 道路运输和交通信息技术自动车辆和设备识别系统规范 Road transport and traffic telematics - Automatic vehicle and equipment identification - System specification |
| 28 | ISO/TS 14816-2000 | 道路运输和交通信息技术自动车辆和设备识别数字和数据结构 Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structures |
| 29 | ISO/TS 14819.3-2000 | 交通及旅客信息(TTI)经过交通电文编码的TTI电文第3部分:ALERT-C的定位 Traffic and Traveller Information (TTI) - TTI messages via traffic message coding - Part 3: Location referencing for ALERT-C |
| 30 | ISO/TS 14569.2-2001 | 牙科材料磨损抗性的试验指南第2部分:经过两和/或三次牙体接触后磨损抗性的测定 Dental materials - Guidance on testing of wear - Part 2: Wear by two- and/or three body contact |
| 31 | ISO/TS 14415-2005 | Ergonomics of the thermal environment -- Application of International Standards to people with special requirements |
| 32 | ISO/TS 13732.2-2001 | 热环境的人类工效学与表面接触时人的反应的评定方法第2部分:在适中温度时人与表面的接触 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 2: Human contact with surfaces at moderate temperature |
| 33 | ISO/TS 13762-2001 | 粒度分析小角度X射线分散法 Particle size analysis - Small angle X-ray scattering method |
| 34 | ISO/TS 14048-2002 | 环境管理生物圈评价数据文件格式 Environmental management - Life cycle assessment - Data documentation format |
| 35 | ISO/TS 14253.2-1999 | 几何产品规范(GPS)工件和测量设备测量的检验第2部分:GPS测量中不确定度评价指南和在产品检验中测量设备的校正 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guide to the estimation of uncertainty in GPS measurement in calibration of measuring equipment and in product verification |
| 36 | ISO/TS 13725-2001 | 液力传动液压缸测定抗弯强度的方法 Hydraulic fluid power - Cylinders - Method for determining the buckling load |
| 37 | ISO/TS 14253.3-2002 | 产品几何量技术规范(GPS)工件的测量检验和测量设备第3部分:测量不确定度声明达成一致的指南 Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements First Edition |
| 38 | ISO/TS 14167-2003 | Gas analysis General quality assurance aspects in the use of calibration gas mixtures Guidelines First Edition |
| 39 | ISO/TS 13899.1-2004 | Steel Determination of Mo Nb and W contents in alloyed steel Inductively coupled plasma atomic emission spectrometric method Part 1: Determination of Mo content First Edition |
| 40 | ISO/TS 13899.3-2005 | Steel -- Determination of Mo Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 3: Determination of W content |
| 41 | ISO/TS 13475.2-2000 | 声学户外使用的固定音响警告装置第2部分:声音放射量的精确测定方法 Acoustics - Stationary audible warning devices used outdoors - Part 2: Precesion methods for determination of sound emission quantities |
| 42 | ISO/TS 13571-2002 | 火灾威胁生命的部位利用火灾数据脱逃有效时间的评定导则 Life-threatening components of fire - Guidelines for the estimation of time available for escape using fire data |
| 43 | ISO/TS 13353-2002 | 内燃机用柴油和汽油滤油器用粒子计数法测定初始效率 Diesel fuel and petrol filters for internal combustion engines - Initial efficiency by particle counting |
| 44 | ISO/TS 13409-2002 | 医用产品灭菌辐射灭菌小或稀少产品系列用灭菌计量25kGy的验证 Sterilization of health care products - Radiation sterilization - Substantiation of 25 kGy as a sterilization dose for small or infrequent production batches |
| 45 | ISO/TS 13474-2003 | Acoustics - Impulse Sound Propagation for Environmental Noise Assessment First Edition |
| 46 | ISO/TS 13499-2003 | Road Vehicles - Multimedia Data Exchange Format for Impact Tests First Edition |
| 47 | ISO/TS 13399.2-2005 | Cutting tool data representation and exchange -- Part 2: Reference dictionary for the cutting items |
| 48 | ISO/TS 12902-2001 | 固体矿物燃料碳、氢和氮总量的测定仪器法 Solid mineral fuels - Determination of total carbon hydrogen and nitrogen - Instrumental methods |
| 49 | ISO/TS 12927-1999 | 润滑剂、工业油和相关产品(L级)M系列(金属加工)确定规范的指南 Lubricants industrial oils and related products (class L) - Family M (Metalworking) - Guidelines for establishing specifications |
| 50 | ISO/TS 12928-1999 | 润滑剂、工业油和相关产品(L级)R系列(暂时防腐用产品)确定规范的指南 Lubricants industrial oils and related products (class L) - Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications |
| 51 | ISO/TS 12180.2-2003 | Geometrical Product Specifications (GPS) Cylindricity Part 2: Specification operators First Edition |
| 52 | ISO/TS 12181.1-2003 | Geometrical Product Specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness First Edition |
| 53 | ISO/TS 12181.2-2003 | Geometrical Product Specifications (GPS) Roundness Part 2: Specification operators First Edition |
| 54 | ISO/TS 12780.1-2003 | Geometrical Product Specifications (GPS) Straightness Part 1: Vocabulary and parameters of straightness First Edition |
| 55 | ISO/TS 12780.2-2003 | Geometrical Product Specifications (GPS) Straightness Part 2: Specification operators First Edition |
| 56 | ISO/TS 12781.1-2003 | Geometrical Product Specifications (GPS) Flatness Part 1: Vocabulary and parameters of flatness First Edition |
| 57 | ISO/TS 12781.2-2003 | Geometrical Product Specifications (GPS) Flatness Part 2: Specification operators First Edition |
| 58 | ISO/TS 11725-2002 | 固体矿物燃料氮的测定半微量气化法 Solid mineral fuels - Determination of nitrogen - Semi-micro gasification method |
| 59 | ISO/TS 12029-2002 | 电子图像电子图像管理的形式设计优化 Electronic imaging - Forms design optimization for electronic image management |
| 60 | ISO/TS 12033-2001 | 电子成像文件图像压缩法的选择指南 Electronic imaging - Guidance for selection of document image compression methods |
| 61 | ISO/TS 11370-2000 | Water Quality - Determination of Selected Organic Plant-Treatment Agents - Automated Multiple Development (AMD) Technique First Edition; Corrected and Reprinted:06/01/2001 |
| 62 | ISO/TS 11155.2-2002 | 道路车辆乘员舱内空气滤清器第2部分:气体过滤试验 Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration |
| 63 | ISO/TS 11405-2003 | Dental Materials - Testing of Adhesion to Tooth Structure Second Edition |
| 64 | ISO/TS 12104-2003 | Road vehicles Gearshift patterns Manual transmissions with power-assisted gearchange and automatic transmissions with manual-gearshift mode First Edition |
| 65 | ISO/TS 12180.1-2003 | Geometrical Product Specifications (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form First Edition |
| 66 | ISO/TS 10303.332-2002 | 工业自动化系统和集成产品数据表示和交换第332部分:理论试验序列:技术数据压缩码信息和交换 Industrial automation systems and integration - Product data representation and exchange - Part 332: Abstract test suite: Technical data packaging core information and exchange |
| 67 | ISO/TS 10811.1-2000 | 机械振动和冲击具有敏感性设备的建筑物的振动和冲击第1部分:测量和评价 Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment - Part 1: Measurement and evaluation |
| 68 | ISO/TS 10811.2-2000 | 机械振动和冲击具有敏感性设备的建筑物的振动和冲击第2部分:分类 Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment - Part 2: Classification |
| 69 | ISO/TS 10839-2000 | 供应气体燃料的聚乙烯管和配件设计、搬运和安装实施规范 Polyethylene pipes and fittings for the supply of gaseous fuels - Code of practice for design handling and installation |
| 70 | ISO/TS 11133.1-2000 | 食品和动物饲料的微生物学培养基制备和生产导则第1部分:实验室培养基制备的质量保证一般导则 Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 1: General guidelines on quality assurance for the preparation of culture media in the laboratory |
| 71 | ISO/TS 11139-2001 | 保健产品的灭菌词汇 Sterilization of health care products - Vocabulary |
| 72 | ISO/TS 11155.1-2001 | 道路车辆客座室用空气过滤器第1部分:颗粒过滤试验 Road vehicles - Air filters for passenger compartments - Part 1: Test for particle filtration |
| 73 | ISO/TS 10303.35-2003 | Industrial automation systems and integration Product data representation and exchange Part 35: Conformance testing methodology and framework: Abstract test methods for standard data access interface (SDAI) implementations First Edition |
| 74 | ISO/TS 10303.325-2004 | Industrial automation systems and integration Product data representation and exchange Part 325: Abstract test suite: Building elements using explicit shape representation First Edition |
| 75 | ISO/TS 11133.2-2003 | Microbiology of food and animal feeding stuffs Guidelines on preparation and production of culture media Part 2: Practical guidelines on performance testing of culture media First Edition |
| 76 | ISO/TS 10303.1004-2001 | 工业自动化系统和集成产品数据表示和交换第1004部分:应用模型:基本几何形状 Industrial automation systems and integration - Product data representation and exchange - Part 1004: Application module: Elemental geometric shape |
| 77 | ISO/TS 10303.1005-2001 | 工业自动化系统和集成产品数据表示和交换第1005部分:应用模型:基本拓扑结构 Industrial automation systems and integration - Product data representation and exchange - Part 1005: Application module: Elemental topology |
| 78 | ISO/TS 10303.1006-2001 | 工业自动化系统和集成产品数据表示和交换第1006部分:应用模型:基础表示法 Industrial automation systems and integration - Product data representation and exchange - Part 1006: Application module: Foundation representation |
| 79 | ISO/TS 10303.1007-2001 | 工业自动化系统和集成产品数据表示和交换第1007部分:应用模型:通用表面外观 Industrial automation systems and integration - Product data representation and exchange - Part 1007: Application module: General surface appearance |
| 80 | ISO/TS 10303.1008-2001 | 工业自动化系统和集成产品数据表示和交换第1008部分:应用模型:层分配 Industrial automation systems and integration - Product data representation and exchange - Part 1008: Application module: Layer assignment |
| 81 | ISO/TS 10303.1009-2001 | 工业自动化系统和集成产品数据表示和交换第1009部分:应用模型:形状外观和层 Industrial automation systems and integration - Product data representation and exchange - Part 1009: Application module: Shape appearance and layers |
| 82 | ISO/TS 10303.27-2000 | 工业自动化系统和集成产品数据表示和信息交流第27部分:执行方法:与因特网/内部网扩展部分的标准数据存取界面的JAVA程序设计语言 Industrial automation systems and integration - Product data representation and exchange - Part 27: Implementation methods: Java<(hoch)TM> programming language binding to the standard data access interface with Internet/Intranet extensions |
| 83 | ISO/TS 10303.304-2001 | 工业自动化系统和集成产品数据表示和交换第304部分:抽象试验组用轮廓表示法的机械设计 Industrial automation systems and integration - Product data representation and exchange - Part 304: Abstract test suite: Mechanical design using boundary representation |
| 84 | ISO/TS 10303.324-1999 | 工业自动化系统和集成产品数据表示和交换第324部分:抽象试验组用机械特性的加工设计的机械产品定义 Industrial automation systems and integration - Product data representation and exchange - Part 324: Abstract test suite: Mechanical product definition for process plans using machining features |
| 85 | ISO/TS 10303.28-2003 | Industrial automation systems and integration Product data representation and exchange Part 28: Implementation methods: XML representations of EXPRESS schemas and data First Edition |
| 86 | ISO/TR 9790-1999 | 道路车辆拟人侧面碰撞标样评定标样生物仿真度的横向碰撞反应要求 Road Vehicles - Anthropomorphic Side Impact Dummy - Lateral Impact Response Requirements to Assess the Biofidelity of the Dummy First Edition |
| 87 | ISO/TR 9819-1991 | 道路车辆灯光发信装置光度要求规则的比较表 Road Vehicles - Comparison Tables of Regulations on Photometric Requirements of Light Signalling Devices First Edition |
| 88 | ISO/TR 9823-1990 | 明渠液体流量测量用有限垂线数进行的速度面积法 Liquid Flow Measurement in Open Channels - Velocity-Area Method Using a Restricted Number of Verticals First Edition |
| 89 | ISO/TR 9824.1-1990 | 暗渠自由流量第1部分:测量方法 Measurement of Free Surface Flow in Closed Conduits - Part 1: Methods First Edition |
| 90 | ISO/TR 9824.2-1990 | 暗渠自由流量第2部分:测量设备 Measurement of Free Surface Flow in Closed Conduits - Part 2: Equipment First Edition |
| 91 | ISO/TR 9901-1990 | 太阳能野外日射强度计使用推荐实用规范 Solar Energy - Field Pyranometers - Recommended Practice for Use First Edition |
| 92 | ISO/TR 9953-1996 | 土方机械低速机械的报警设备超声波学与其他系统 Earth-moving machinery - Warning devices for slow-moving machines - Ultrasonic and other systems |
| 93 | ISO/TS 10303.1001-2001 | 工业自动化系统和集成产品数据表示和交换第1001部分:应用模型:外观确定 Industrial automation systems and integration - Product data representation and exchange - Part 1001: Application module: Appearance assignment |
| 94 | ISO/TS 10303.1002-2001 | 工业自动化系统和集成产品数据表示和交换第1002部分:应用模型:颜色 Industrial automation systems and integration - Product data representation and exchange - Part 1002: Application module: Colour |
| 95 | ISO/TS 10303.1003-2001 | 工业自动化系统和集成产品数据表示和交换第1003部分:应用模型:曲线外观 Industrial automation systems and integration - Product data representation and exchange - Part 1003: Application module: Curve appearance |
| 96 | ISO/TR 9586-1988 | 外科植入物在矫形外科中术语"VALGUS及VARAS ”的应用 Implants for Surgery - Usage of the Terms "Valgus" and "Varus" in Orthopaedic Surgery First Edition |
| 97 | ISO/TR 9705.2-2001 | 燃烧试验反应表面产品的全尺寸房间试验第2部分:技术背景和指南 Reaction-to-Fire Tests - Full-Scale Room Tests for Surface Products - Part 2: Technical Background and Guidance First Edition |
| 98 | ISO/TR 9721-1992 | 镍和镍合金以化学符号为基础的材料描述规则 Nickel and Nickel Alloys - Rules for Material Description Based on Chemical Symbols First Edition |
| 99 | ISO/TR 9769-1991 | 钢和铁现有分析方法评价 Steel and Iron - Review of Available Methods of Analysis Third Edition |
| 100 | ISO/TR 9573-1988 | Information Processing - SGML Support Facilities - Techniques for Using SGML First Edition |