| 序号 | 标准号 | 标准名称 |
 1 | ISO 15474.1-2002 | Information Technology - CDIF Framework - Part 1: Overview First Edition |
| 2 | ISO 15474.2-2002 | Information Technology - CDIF Framework - Part 2: Modelling and Extensibility First Edition |
| 3 | ISO 15475.1-2002 | 信息技术CDIF传输格式第1部分:句法和编码一般规则 Information technology CDIF transfer format Part 1: General rules for syntaxes and encodings First Edition |
| 4 | ISO 15469-2004 | 日光的空间分布CIE标准阴天和晴天 Spatial Distribution of Daylight - CIE standard general sky Second Edition; CIE S 011/E:2003 |
| 5 | ISO 15465-2004 | Pipework Stripwound metal hoses and hose assemblies First Edition; (Replaces ISO 7657:1995; ISO 7658:1984; ISO 8444:1985; ISO 8445:1995; ISO 8446:1995; ISO 8447:1986; ISO 8448:1986; ISO 8449:1995; ISO 8450:1986) |
| 6 | ISO 15480-1999 | 带锥螺纹及六角垫圈螺钉头的自攻螺钉 Hexagon Washer Head Drilling Screws with Tapping Screw Thread First Edition |
| 7 | ISO 15481-1999 | 带有敲击出螺纹的十字凹槽平头自攻丝螺纹 Cross Recessed Pan Head Drilling Screws with Tapping Screw Thread First Edition |
| 8 | ISO 1548-1976 | 飞机精确的熔断体A型 Aircraft -- Precision fuse-links -- Type A |
| 9 | ISO 15482-1999 | 带螺丝攻的十字凹槽埋头攻丝螺丝 Cross Recessed Countersunk Head Drilling Screws with Tapping Screw Thread First Edition |
| 10 | ISO 15483-1999 | 带螺丝攻的十字凹槽半埋头攻丝螺丝 Cross Recessed Raised Countersunk Head Drilling Screws with Tapping Screw Thread First Edition |
| 11 | ISO 15485-1997 | 信息技术用相位型PD格式的120mm盒式光盘上的数据交换容量:650兆比特/盘 Information Technology - Data Interchange on 120 mm Optical Disk Cartridges Using Phase Change PD Format - Capacity: 650 Mbytes per Cartridge First Edition |
| 12 | ISO 15476.1-2002 | (Draft)Information Technology - CDIF Semantic Metamodels - Part 1: Foundation First Edition |
| 13 | ISO 15476.2-2002 | (Draft)Information Technology - CDIF Semantic Meatmodels - Part 2: Common First Edition |
| 14 | ISO 15475.2-2002 | 信息技术CDIF传输格式第2部分:句法SYNTAX1 Information technology CDIF transfer format Part 2: Syntax SYNTAX1 First Edition |
| 15 | ISO 15475.3-2002 | 信息技术CDIF传输格式第3部分:编码ENCODING1 Information technology CDIF transfer format Part 3: Encoding ENCODING1 First Edition28 |
| 16 | ISO 15487-1999 | 纺织品评定家洗和烘干后衣服和其它纺织品外观的方法 Textiles - Method for Assessing Appearance of Apparel and Other Textile End Products After Domestic Washing and Drying First Edition |
| 17 | ISO 15488-1996 | 刀具柄用设定有8°角的夹头夹头、螺母和配件尺寸 Collets with 8 Degrees Setting Angle for Tool Shanks - Collets Nuts and Fitting Dimensions First Edition |
| 18 | ISO 15489.1-2001 | 信息和文献记录文献管理第1部分:总则 Information and documentation - Records management - Part 1: General |
| 19 | ISO 15490-2000 | 细陶瓷(高级陶瓷、高级工业陶瓷)室温下单片陶瓷抗拉强度的试验方法 Fine Ceramics (Advanced Ceramics Advanced Technical Ceramics) - Test Method for Tensile Strength of Monolithic Ceramics at Room Temperature First Edition |
| 20 | ISO 1549-1976 | 飞机精确的熔断体B型 Aircraft -- Precision fuse-links -- Type B |
| 21 | ISO 15486-1998 | Information Technology - Data Interchange on 130 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using Irreversible Effects - Capacity: 26 Gbytes per Cartridge First Edition |
| 22 | ISO 15493-2003 | Plastics Piping Systems for Industrial Application - Acrylonitrile-Butadiene-Styrene (ABS) Unplasticized Poly(Vinyl Chloride) (PVC-U) and Chlorinated Poly(Vinyl Chloride) (PVC-C) - Specifications for Components and the System - Metric Series First Editi |
| 23 | ISO 15494-2003 | Plastics Piping Systems for Industrial Applications - Polybutene (PB) Polyethylene (PE) and Polypropylene (PP) - Specifications for Components and the System - Metric Series First Edition; Corrected version: 2/01/2004 |
| 24 | ISO 15488-2003 | 刀具柄用设定有8°角的夹头夹头、螺母和配件尺寸 Collets with 8setting angle for tool shanks Collets nuts and fitting dimensions Second Edition |
| 25 | ISO 15496-2004 | Textiles Measurement of water vapour permeability of textiles for the purpose of quality control First Edition |
| 26 | ISO 15500.10-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第10部分:气流调节器 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 10: Gas-Flow Adjuster First Edition; Corrected Version 4/1/2003 |
| 27 | ISO 15500.11-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第11部分:燃气/空气混合器 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 11: Gas/Air Mixer First Edition; Corrected Version 4/1/2003 |
| 28 | ISO 15500.1-2000 | 道路车辆压缩天然气(CNG)燃料系统元部件第1部分:一般要求和定义 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 1: General Requirements and Definitions First Edition; Amendment 1: 04/15/2003 |
| 29 | ISO 15500.12-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第12部分:减压阀 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 12: Pressure Relief Valve (PRV) First Edition |
| 30 | ISO 15500.13-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第13部分:压力释放装置 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 13: Pressure Relief Device (PRD) First Edition |
| 31 | ISO 15500.14-2002 | 道路车辆压缩天然气(CNG)燃料系统部件第14部分:溢流阀 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 14: Excess Flow Valve First Edition |
| 32 | ISO 15500.15-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第15部分:气密罩和通风软管 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 15: Gas-Tight Housing and Ventilation Hose First Edition |
| 33 | ISO 15500.16-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第16部分:刚性燃料线路 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 16: Rigid Fuel Line First Edition |
| 34 | ISO 15500.17-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第17部分:挠性燃料线路 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 17: Flexible Fuel Line First Edition |
| 35 | ISO 15498-1997 | Information Technology - Data Interchange on 90 mm Optical Disk Cartridges - HS-1 Format - Capacity: 650 Mbytes per Cartridge First Edition |
| 36 | ISO 15500.18-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第18部分:过滤器 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 18: Filter First Edition |
| 37 | ISO 15500.19-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第19部分:配件 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 19: Fittings First Edition |
| 38 | ISO 15500.2-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第2部分:性能和一般试验方法 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 2: Performance and General Test Methods First Edition |
| 39 | ISO 15500.3-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第3部分:止回阀 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 3: Check Valve First Edition |
| 40 | ISO 15500.4-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第4部分:手动阀 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 4: Manual Valve First Edition |
| 41 | ISO 15500.5-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第5部分:手动汽阀 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 5: Manual Cylinder Valve First Edition |
| 42 | ISO 15500.6-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第6部分:自动阀门 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 6: Automatic Valve First Edition |
| 43 | ISO 15500.8-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第8部分:压力指示器 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 8: Pressure Indicator First Edition |
| 44 | ISO 15500.9-2001 | 道路车辆压缩天然气(CNG)燃料系统元部件第9部分:压力调节器 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 9: Pressure Regulator First Edition |
| 45 | ISO 15500.7-2002 | 道路车辆压缩天然气(CNG)燃料系统元部件第7部分:气体喷射器 Road Vehicles - Compressed Natural Gas (CNG) Fuel System Components - Part 7: Gas Injector First Edition |
| 46 | ISO 15501.1-2001 | 道路车辆压缩天然气燃料系统第1部分:安全要求 Road vehicles - Compressed natural gas (CNG) fuel systems - Part 1: Safety requirements |
| 47 | ISO 15501.2-2001 | 道路车辆压缩天然气(CNG)燃料系统第2部分:试验方法 Road Vehicles - Compressed Natural Gas (CNG) Fuel Systems - Part 2: Test Methods First Edition |
| 48 | ISO 15507-1997 | 信息技术系统间电信和信息交换专业综合服务网内部交换信令协议PINX时钟同步 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - PINX Clock Synchroization First Edition |
| 49 | ISO 15505-2000 | Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network (PISN) - Specification Functional Model and Information Flows - Message Waiting Indication Supplementary Service Second Edition |
| 50 | ISO 15506-2000 | Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Message Waiting Indication Supplementary Service Second Edition; Technical Corrigendu |
| 51 | ISO 15501.2-2002 | 道路车辆压缩天然气(CNG)燃料系统第2部分:试验方法 Road Vehicles - Compressed Natural Gas (CNG) Fuel Systems - Part 2: Test Methods First Edition |
| 52 | ISO 15505-2003 | Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network (PISN) - Specification Functional Model and Information Flows - Message Waiting Indication Supplementary Service Third Edition |
| 53 | ISO 15506-2003 | Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Message Waiting Indication Supplementary Service Third Edition |
| 54 | ISO 15504.2-2003 | Software engineering Process assessment Part 2: Performing an assessment First Edition; Technical Corrigendum 1: 02/15/2004 |
| 55 | ISO 15504.3-2004 | Information technology Process assessment Part 3: Guidance on performing an assessment First Edition |
| 56 | ISO 15509-2001 | 粘结性工程塑料接头粘结强度的测定 Adhesives - Determination of the Bond Strength of Engineering-Plastic Joints First Edition |
| 57 | ISO 15513-2000 | 起重机起重机司机(操纵者)、吊装工、信号员和助手的资格要求 Cranes - Competency Requirements for Crane Drivers (Operators) Slingers Signallers and Assessors First Edition |
| 58 | ISO 155-1998 | 皮带传动皮带轮中心调整极限值 Belt drives -- Pulleys -- Limiting values for adjustment of centres |
| 59 | ISO 15521-1998 | 信息技术信息交换用381mm宽盒式磁带螺旋扫描录制125m长带DDS-3格式 Information Technology - 381 mm Wide Magnetic Tape Cartridge for Informatation Interchange - Helical Scan Recording - DDS-3 Format Using 125 m Length Tapes First Edition |
| 60 | ISO 1552-1976 | 工业用液态氯取样方法[只限于测定氯含量(体积)] Liquid chlorine for industrial use -- Method of sampling (for determining only the volumetric chlorine content) |
| 61 | ISO 15522-1999 | 水质活动性污水微生物增长水流动抑制效果的测定 Water Quality - Determination of the Inhibitory Effect of Water Consitituents on the Growth of Activated Sludge Microorganisms First Edition |
| 62 | ISO 15526.1-2000 | 塑料聚酮(PK)模塑和挤塑材料第1部分:名称与符号系统和规范基础 Plastics - Polyketone (PK) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications First Edition |
| 63 | ISO 15512-1999 | 塑料水含量的测定 Plastics - Determination of Water Content First Edition; Replaces ISO 960: 1988 |
| 64 | ISO 15517-2003 | Tobacco Determination of nitrate content Continuous-flow analysis method First Edition |
| 65 | ISO 15511-2003 | Information and documentation International Standard Identifier for Libraries and Related Organizations (ISIL) First Edition |
| 66 | ISO 15526.2-2000 | 塑料聚酮(PK)模塑和挤塑材料第2部分:试样的制备和特性的测定 Plastics - Polyketone (PK) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties First Edition |
| 67 | ISO 15528-2000 | 涂料和清漆用涂料、清漆和原材料取样 Paints Varnishes and Raw Materials for Paints and Varnishes - Sampling First Edition; Cancels and Replaces ISO 842: 1984 and ISO 1512: 1991 |
| 68 | ISO 15529-1999 | 光学和光学仪器透光功能样品成像系统调整透光功能(MTF)的测量规则 Optics and optical instruments - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems |
| 69 | ISO 1553-1976 | 含铜不小于9990%的非合金铜铜含量的测定电解法 Unalloyed copper containing not less than 9990 % of copper -- Determination of copper content -- Electrolytic method |
| 70 | ISO 15534.1-2000 | 机械安全的人类工效学设计第1部分:进入机械的入孔开口所要求的尺寸测定的规则 Ergonomic Design for the Safety of Machinery - Part 1: Principles for Determining the Dimensions Required for Openings for Whole-Body Access into Machinery First Edition |
| 71 | ISO 15534.2-2000 | 机械安全的人类工效学设计第2部分:入孔开口所要求的尺寸测定的规则 Ergonomic Design for the Safety of Machinery - Part 2: Principles for Determining the Dimensions Required for Access Openings First Edition |
| 72 | ISO 15534.3-2000 | 机械安全的人类工效学设计第3部分:人体测量学的数据 Ergonomic Design for the Safety of Machinery - Part 3: Anthropometric Data First Edition |
| 73 | ISO 15535-2003 | General requirements for establishing anthropometric databases First Edition |
| 74 | ISO 15531.1-2004 | Industrial automation systems and integration Industrial manufacturing management data Part 1: General overview First Edition |
| 75 | ISO 15531.31-2004 | Industrial automation systems and integration Industrial manufacturing management data Part 31: Resource information model First Edition |
| 76 | ISO 15538-2001 | 消防员用的防护服装有反射性外表面的防护服装的实验室试验方法和性能要求 Protective Clothing for Firefighters - Laboratory Test Methods and Performance Requirements for Protective Clothing with a Reflective Outer Surface First Edition |
| 77 | ISO 15540-1999 | 船舶和造船技术软管组件的抗燃性试验方法 Ships and Marine Technology - Fire Resistance of Hose Assemblies - Test Methods First Edition; Technical Corrigendum 1: 12-01-1999 |
| 78 | ISO 15541-1999 | 船舶和造船技术软管组件的抗燃性试验板的要求 Ships and Marine Technology - Fire Resistance of Hose Assemblies - Requirements for the Test Bench First Edition |
| 79 | ISO 1554-1976 | 锻铜合金和铸铜合金铜含量的测定电解法 Wrought and cast copper alloys -- Determination of copper content -- Electrolytic method |
| 80 | ISO 15544-2000 | 石油和天然气工业海上生产装置紧急响应要求和导则 Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response |
| 81 | ISO 15547 | 石油和天然气工业板式热交换器 (Pending)Petroleum and Natural Gas Industries - Plate Heat Exchangers Second Edition |
| 82 | ISO 15547-2000 | 石油和天然气工业板式热交换器 Petroleum and Natural Gas Industries - Plate Heat Exchangers First Edition |
| 83 | ISO 15540 Technical Corrigendum 1-1999 | 造船和航海技术软管组件的抗燃性试验方法技术勘误1 Ships and marine technology - Fire resistance of hose assemblies - Test methods; Technical Corrigendum 1 |
| 84 | ISO 15546-2002 | 石油和天然气工业铝合金钻杆 Petroleum and natural gas industries Aluminium alloy drill pipe First Edition |
| 85 | ISO 15536.1-2005 | Ergonomics -- Computer manikins and body templates -- Part 1: General requirements |
| 86 | ISO 15550-2002 | 内燃机发动机功率的测量和检测方法一般要求 Internal combustion engines - Determination and method for the measurement of engine power - General requirements |
| 87 | ISO 15579-2000 | 金属材料低温抗拉试验 Metallic Materials - Tensile Testing at Low Temperature First Edition |
| 88 | ISO 15584-2001 | 小型船舶船内汽油发动机安装发动机的燃料和电气元件 Small Craft - Inboard Petrol Engines - Engine-Mounted Fuel and Electrical Components First Edition |
| 89 | ISO 15587.1-2002 | 水质测定水中所选元素的发酵作用第1部分:王水发酵作用 Water quality - Digestion for the determination of selected elements in water - Part 1: Aqua regia digestion |
| 90 | ISO 15587.2-2002 | 水质测定水中所选元素的发酵作用第2部分:硝酸发酵作用 Water quality - Digestion for the determination of selected elements in water - Part 2: Nitric acid digestion |
| 91 | ISO 1559 Technical Corrigendum 1-1997 | 牙科材料牙用汞齐合金技术勘误1 Dental materials - Alloys for dental amalgam; Technical Corrigendum 1 |
| 92 | ISO 15586-2003 | Water quality Determination of trace elements using atomic absorption spectrometry with graphite furnace First Edition |
| 93 | ISO 15589.1-2003 | Petroleum and Natural Gas Industries - Cathodic Protection of Pipeline Transportation Systems - Part 1: On-Land Pipelines First Edition |
| 94 | ISO 15552-2004 | Pneumatic fluid power Cylinders with detachable mountings 1 000 kPa (10 bar) series bores from 32 mm to 320 mm Basic mounting and accessories dimensions First Edition |
| 95 | ISO 15583-2005 | Ships and marine technology -- Maritime standards list |
| 96 | ISO 15590.1-2001 | 石油和天然气工业管道运输系统用感应弯头、配件和法兰第1部分:感应弯头 Petroleum and Natural Gas Industries - Induction Bends Fittings and Flanges for Pipeline Transportation Systems - Part 1: Induction Bends First Edition |
| 97 | ISO 15592.1-2001 | 细切烟草及其烟制品抽样、调节和分析方法第1部分:抽样 Fine-Cut Tobacco and Smoking Articles Made from It - Methods of Sampling Conditioning and Analysis - Part 1: Sampling First Edition |
| 98 | ISO 15592.2-2001 | 细切烟草及其烟制品抽样、调节和分析方法第2部分:调节和试验大气 Fine-Cut Tobacco and Smoking Articles Made from It - Methods of Sampling Conditioning and Analysis - Part 2: Atmosphere for Conditioning and Testing First Edition |
| 99 | ISO 15593-2001 | 环境烟草烟雾可呼吸悬浮颗粒的评价通过荧光和超挥发吸收测定颗粒物质 Environmental Tobacco Smoke - Estimation of Its Contribution to Respirable Suspended Particles - Determination of Particulate Matter by Ultraviolet Absorbance and by Fluorescence First Edition |
| 100 | ISO 15597-2001 | 石油和有关产品氯和溴含量的测定波长散射X射线荧光光谱法 Petroleum and Related Products - Determination of Chlorine and Bromine Content - Wavelength-Dispersive X-Ray Fluorescence Spectrometry First Edition |