| 序号 | 标准号 | 标准名称 |
 1 | ISO 15011.1-2002 | 焊接和有关过程中的健康和安全电弧焊接产生的取样烟尘和气体的实验室方法第1部分:颗粒烟尘分析的排放率测定和取样 Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases generated by arc welding -- Part 1: Determination of emission rate and sampling for analysis of particulate fume |
| 2 | ISO 15013-1998 | 聚丙烯挤压片材(PP)要求和试验方法 Extruded sheets of polypropylene (PP) -- Requirements and test methods |
| 3 | ISO 15016-2002 | 船舶和海上技术用速度试验数据分析法对速度和动力性能的评定导则 Ships and marine technology -- Guidelines for the assessment of speed and power performance by analysis of speed trial data |
| 4 | ISO 150-1980 | 色漆和清漆用生、精制和熟亚麻子油规范和试验方法 Raw refined and boiled linseed oil for paints and varnishes -- Specifications and methods of test |
| 5 | ISO 1502-1996 | ISO一般用途米制螺纹量规和量规检验 ISO general-purpose metric screw threads -- Gauges and gauging |
| 6 | ISO 15009-2002 | 土壤质量气相测谱法测定挥发性芳烃、萘和挥发性卤化烃含量热解析的净化和收集法 Soil quality -- Gas chromatographic determination of the content of volatile aromatic hydrocarbons naphthalene and volatile halogenated hydrocarbons -- Purge-and-trap method with thermal desorption |
| 7 | ISO 15011.3-2002 | 焊接和相关工艺的卫生和安全电弧焊产生的烟和气体取样的实验室法第3部分:用固定点测量法测定臭氧浓度 Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases generated by arc welding -- Part 3: Determination of ozone concentration using fixed point measurements |
| 8 | ISO 15011.2-2003 | 焊接和相关工艺的卫生与安全 通过弧焊的取样烟尘和产生气体的实验室方法 第2部分：除臭氧外气体排放速率的测定 Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases generated by arc welding -- Part 2: Determination of emission rates of gases except ozone |
| 9 | ISO 15012.1-2004 | 焊接和相关工艺的健康与安全 空气过滤设备的试验和标识要求 第1部分：焊接烟气分离效果试验 Health and safety in welding and allied processes -- Requirements testing and marking of equipment for air filtration -- Part 1: Testing of the separation efficiency for welding fume |
| 10 | ISO 15022.1-1999 | 证券文电图解(数据区字典)第1部分:数据区和文电设计规则和导则 Securities -- Scheme for messages (Data Field Dictionary) -- Part 1: Data field and message design rules and guidelines |
| 11 | ISO 15022.2-1999 | 证券文电图解(数据区字典)第2部分:数据区字典和文电目录的维护 Securities -- Scheme for messages (Data Field Dictionary) -- Part 2: Maintenance of the Data Field Dictionary and Catalogue of Messages |
| 12 | ISO 15023.1-2001 | 塑料聚乙烯醇材料第1部分:名称与符号系统和规范基础 Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 1: Designation system and basis for specifications |
| 13 | ISO 15024-2001 | 纤维增强塑料复合材料无方向性增强材料的模型I层间断裂韧度G<(Index)IC>的测定 Fibre-reinforced plastic composites -- Determination of mode I interlaminar fracture toughness GIC for unidirectionally reinforced materials |
| 14 | ISO 15025-2000 | 防护服防热和防火限制火焰扩散的试验方法 Protective clothing -- Protection against heat and flame -- Method of test for limited flame spread |
| 15 | ISO 15022.1 Technical Corrigendum 1-1999 | 证券文电图解(数据区字典)第1部分:数据区和文电设计规则和导则技术勘误1 Securities - Scheme for messages (Data Field Dictionary) - Part 1: Data field and message design rules and guidelines; Technical Corrigendum 1 |
| 16 | ISO 15022.2 Technical Corrigendum 1-1999 | 证券文电图解(数据区字典)第2部分:数据区字典和文电目录的维护技术勘误1 Securities - Scheme for messages (Data Field Dictionary) - Part 2: Maintenance of the Data Field Dictionary and Catalogue of Messages; Technical Corrigendum 1 |
| 17 | ISO 15023.2-2003 | 塑料 聚(乙烯醇)(PVAL)材料 第2部分：性能测定 Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 2: Determination of properties |
| 18 | ISO 15026-1998 | 信息技术系统和软件综合水平 Information Technology - System and Software Integrity Levels First Edition |
| 19 | ISO 15027.1-2002 | 浸渍服装第1部分:耐磨服装包括安全的要求 Immersion suits -- Part 1: Constant wear suits requirements including safety |
| 20 | ISO 15027.2-2002 | 浸渍服装第2部分:废弃的服装包括安全要求 Immersion suits -- Part 2: Abandonment suits requirements including safety |
| 21 | ISO 15027.3-2002 | 浸渍服装第3部分:试验方法 Immersion suits -- Part 3: Test methods |
| 22 | ISO 15029.1-1999 | 石油和相关产品耐火液体喷射点燃特性的测定第1部分:喷射火焰持久性空心喷射器法 Petroleum and related products -- Determination of spray ignition characteristics of fire-resistant fluids -- Part 1: Spray flame persistence -- Hollow-cone nozzle method |
| 23 | ISO 15031.1-2001 | 道路车辆检定排放用的车辆和外部设备间的通信第1部分:通用信息 Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 1: General information |
| 24 | ISO 15031.7-2001 | 道路车辆检定排放用的车辆和外部设备间的通信第7部分:数据连接安全 Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 7: Data link security |
| 25 | ISO 15031.4-2005 | Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 4: External test equipment |
| 26 | ISO 15028-2004 | 塑料 聚氨酯生产用芳香异氰酸酯 水解氯的测定 Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of hydrolysable chlorine |
| 27 | ISO 15031.3-2004 | 道路车辆 车辆与外部设备之间有关泄露特征的联络 第3部分：诊断接头和相关电路、规格和使用 Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 3: Diagnostic connector and related electrical circuits specification and use |
| 28 | ISO 1503-1977 | 运动的几何定位与方向 Geometrical orientation and directions of movements |
| 29 | ISO 15032-2000 | 修复术髋关节结构试验 Prostheses -- Structural testing of hip units |
| 30 | ISO 15033-2000 | 塑料用高效液相色谱分析法测定己内酰胺及其周期和线性齐聚物 Plastics - Determination of Caprolactam and its Cyclic and Linear Oligomers by HPLC First Edition |
| 31 | ISO 15034-1999 | 复合物预浸料坯树脂流动的测定 Composites -- Prepregs -- Determination of resin flow |
| 32 | ISO 15037.1-1998 | 道路车辆车辆动力学试验方法第1部分:轿车的一般条件 Road vehicles -- Vehicle dynamics test methods -- Part 1: General conditions for passenger cars |
| 33 | ISO 15038-1999 | 塑料不饱和聚酯热固材料的有机聚酯交联剂活性氧含量的测定 Plastics -- Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials -- Determination of active-oxygen content |
| 34 | ISO 15037.1 Technical Corrigendum 1-2001 | 道路车辆车辆动力学试验方法第1部分:轿车的一般条件技术勘误1 Road vehicles - Vehicle dynamics test methods - Part 1: General conditions for passenger cars; Technical Corrigendum 1 |
| 35 | ISO 15037.2-2002 | 道路车辆车辆动力学试验方法第2部分:重型车辆和公共汽车的一般条件 Road vehicles -- Vehicle dynamics test methods -- Part 2: General conditions for heavy vehicles and buses |
| 36 | ISO 15039-2003 | 纺织玻璃纤维粗纱 尺寸溶解度的测定 Textile-glass rovings -- Determination of solubility of size |
| 37 | ISO 15040-1999 | 复合物预浸料坯胶凝时间的测定 Composites -- Prepregs -- Determination of gel time |
| 38 | ISO 15041-1997 | 信息技术信息交换用90mm盒式光盘容量:640兆比特/盘 Information Technology - Data Interchange on 90 mm Optical Disk Cartridges - Capacity: 640 Mbytes per Cartridge First Edition |
| 39 | ISO 15049-1997 | 信息技术系统间电信和信息交换专业综合服务网规范、功能模式和信息流计费补充业务通知 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Specification Functional Model and Information Flows - Advice of Charge Supplementary Services First Edition |
| 40 | ISO 15050-1997 | 信息技术系统间电信和信息交换专业综合服务网内部交换信令协议计费补充业务通知 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Advice of Charge Supplementary Services |
| 41 | ISO 15051-1997 | 信息技术系统间电信和信息交换专业综合服务网规范、功能模式和信息流重新呼叫补充业务 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Specification Functional Model and Information Flows - Recall Supplementary Service First Edition |
| 42 | ISO 1505-1993 | 纺织机械染整设备工作宽度标称宽度范围和定义 Textile machinery -- Widths relating to dyeing and finishing machines -- Definitions and range of nominal width |
| 43 | ISO 15052-1997 | 信息技术系统间电信和信息交换专业综合服务网内部交换信令协议重新呼叫补充业务 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Recall Supplementary Service First Edition; Corrigendum 1: 02/01/2002 |
| 44 | ISO 15050-2003 | Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Advice of Charge Supplementary Services Second Edition |
| 45 | ISO 15051-2003 | Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Specification Functional Model and Information Flows - Recall Supplementary Service Second Edition |
| 46 | ISO 15052-2003 | Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Recall Supplementary Service Second Edition |
| 47 | ISO 15053-1997 | 信息技术系统间电信和信息交换专业综合服务网规范、功能模式和信息流呼叫截听附加网络特征 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Specification Functional Model and Information Flows - Call Interception Additional Network Feature First Edition |
| 48 | ISO 15054-1997 | 信息技术系统间电信和信息交换专业综合服务网内部交换信令协议呼叫截听附加网络特征 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Call Interception Additional Network Feature First Edition |
| 49 | ISO 15055-1997 | 信息技术系统间电信和信息交换专业综合服务网规范、功能模式和信息流转接反向附加网络特征 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Specification Functional Model and Information Flows - Transit Counter Additional Network Feature First Edition |
| 50 | ISO 15056-1997 | 信息技术系统间电信和信息交换专业综合服务网内部交换信令协议转接反向附加网络特征 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Transit Counter Additional Network Feature First Edition |
| 51 | ISO 15061-2001 | 水质不溶溴酸盐含量的测定离子液相色谱法 Water quality -- Determination of dissolved bromate -- Method by liquid chromatography of ions |
| 52 | ISO 1506-1982 | 纺织机械染色、整理和有关机械分类和名称 Textile machinery -- Dyeing finishing and allied machinery -- Classification and nomenclature |
| 53 | ISO 15053-2003 | Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Specification Functional Model and Information Flows - Call Interception Additional Network Feature Second Edition |
| 54 | ISO 15054-2003 | Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Call Interception Additional Network Feature Second Edition |
| 55 | ISO 15063-2004 | 塑料用于聚氨酯生产的多元醇 由远红外光谱法测定羟基值 Plastics -- Polyols for use in the production of polyurethanes -- Determination of hydroxyl number by NIR spectroscopy |
| 56 | ISO 15064-2004 | 塑料 聚氨酯生产用芳香异氰酸酯 甲苯异氰酸酯异构体比例的测定 Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of the isomer ratio in toluenediisocyanate |
| 57 | ISO 15071-1999 | 待法兰的六角螺栓小型系列产品A级 Hexagon bolts with flange -- Small series -- Product grade A |
| 58 | ISO 15072-1999 | 带有米制细牙螺纹的法兰六角螺栓小型系列产品等级A Hexagon bolts with flange with metric fine pitch thread -- Small series -- Product grade A |
| 59 | ISO 15078-1998 | 林业机械原木装车机双层驾驶员控制操作的位置和方法 Machinery for forestry -- Log loaders -- Location and method of operation of two-lever operator controls |
| 60 | ISO 15080-2001 | 核设施屏蔽外罩的通风渗透性 Nuclear facilities -- Ventilation penetrations for shielded enclosures |
| 61 | ISO 15082-1999 | 道路车辆刚性塑料安全抛光材料的试验 Road vehicles -- Tests for rigid plastic safety glazing materials |
| 62 | ISO 15068.2-1999 | Information Technology - Portable Operating System Interface (POSIX) System Administration - Part 2: Software Administration First Edition; ANSI/IEEE Std 13872 |
| 63 | ISO 15083-2003 | 小艇 舱底泵吸系统 Small craft - Bilge-pumping systems |
| 64 | ISO 15075-2003 | 交通信息与控制系统 车内导向系统 通信提示组要求 Transport information and control systems -- In-vehicle navigation systems -- Communications message set requirements |
| 65 | ISO 15065-2005 | 头部外形符合ISO 7721的沉头螺钉用沉头 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 |
| 66 | ISO 15081-2005 | Agricultural irrigation equipment -- Graphical symbols for pressurized irrigation systems |
| 67 | ISO 15086.1-2001 | 液压传动元件和系统中液载噪音特性的测定第1部分:说明 Hydraulic fluid power -- Determination of the fluid-borne noise characteristics of components and systems -- Part 1: Introduction |
| 68 | ISO 15086.2-2000 | 液压传动元件和系统中液载噪音特性的测定第2部分:管道液流中声音速度的测量 Hydraulic fluid power -- Determination of the fluid-borne noise characteristics of components and systems -- Part 2: Measurement of the speed of sound in a fluid in a pipe |
| 69 | ISO 15087.1-1999 | 牙科起子第1部分:一般要求 Dental elevators -- Part 1: General requirements |
| 70 | ISO 15087.2-2000 | 牙科起子第2部分:沃里克吉姆斯起子 Dental elevators -- Part 2: Warwick James elevators |
| 71 | ISO 15087.3-2000 | 牙科起子第3部分:CRYER起子 Dental elevators -- Part 3: Cryer elevators |
| 72 | ISO 15087.4-2000 | 牙科起子第4部分:COUPLAND起子 Dental elevators -- Part 4: Coupland elevators |
| 73 | ISO 15087.5-2000 | 牙科起子第5部分:BEIN起子 Dental elevators -- Part 5: Bein elevators |
| 74 | ISO 15087.6-2000 | 牙科起子第6部分:FLOHR起子 Dental elevators -- Part 6: Flohr elevators |
| 75 | ISO 15084-2003 | 小艇 锚链、系泊和拖曳 固定点 Small Craft - Anchoring Mooring and Towing - Strong Points First Edition |
| 76 | ISO 15085-2003 | 小艇 防止落水与救生 Small craft -- Man-overboard prevention and recovery |
| 77 | ISO 15089-2000 | 水质测定植物处理和杀虫剂用选择性的免疫测定导则 Water Quality - Guidelines for Selctive Immunoassays for the Determination of Plant Treatment and Pesticide Agents First Edition |
| 78 | ISO 1509-1973 | 飞机的一般用途推拉式三极断路器性能要求 General purpose push-pull three-pole circuit-breakers for aircraft -- Performance requirements |
| 79 | ISO 15098.1-1999 | 牙科镊子第1部分:一般要求 Dental tweezers -- Part 1: General requirements |
| 80 | ISO 15098.2-2000 | 牙科镊子第2部分:Meriam型 Dental tweezers -- Part 2: Meriam types |
| 81 | ISO 15098.3-2000 | 牙科镊子第3部分:学院型 Dental tweezers -- Part 3: College types |
| 82 | ISO 15100-2000 | 塑料增强纤维短切原丝松密度的测定 Plastics - Reinforcement Fibres - Chopped Strands - Determination of Bulk Density First Edition |
| 83 | ISO 15103.1-2000 | 塑料聚亚苯基乙醚(PPE)模塑和挤制材料第1部分:名称与符号系统和基本规范 Plastics - Poloy(Phenylene Ether) (PPE) Mouldings and Extrusion Materials - Part 1: Designation System and Basis for Specifications First Edition |
| 84 | ISO 15103.2-2000 | 塑料聚亚苯基乙醚(PPE)模塑和挤制材料第2部分:试样制备和性能测定 Plastics - Poloy(Phenylene Ether) (PPE) Mouldings and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties First Edition |
| 85 | ISO 15105.1-2002 | 塑料薄膜和薄板气体传输率的测定第1部分:压差法 Plastics - Film and Sheeting - Determination of Gas-Transmission Rate - Part 1: Differential-Pressure Method First Edition |
| 86 | ISO 15099-2003 | 门窗和遮阳设备的热性能 详细计算 Thermal performance of windows doors and shading devices -- Detailed calculations |
| 87 | ISO 15107-1998 | 胶粘剂胶粘连接抗裂强度的测定 Adhesives - Determination of Cleavage Strength of Bonded Joints First Edition |
| 88 | ISO 15108-1998 | 胶粘剂用弯曲剪切法测定胶粘连接处的强度 Adhesives - Determination of Strength of Bonded Joints Using a Bending-Shear Method First Edition |
| 89 | ISO 15109-1998 | 胶粘剂静负荷状态下胶粘连接处断裂时间的测定 Adhesives - Determination of the Time to Rupture of Bonded Joints under Static Load First Edition |
| 90 | ISO 15113-1999 | 橡胶摩擦特性的测定 Rubber - Determination of Frictional Properties First Edition; Technical Corrigendum 1: 08/1/2001 |
| 91 | ISO 15119-2000 | 包装袋已填充袋摩擦系数的测定 Packaging - Sacks - Determination of the Friction of Filled Sacks First Edition |
| 92 | ISO 15113 Technical Corrigendum 1-2001 | 橡胶摩擦特性的测定技术勘误1 Rubber - Determination of frictional properties; Technical Corrigendum 1 |
| 93 | ISO 15105.2-2003 | Plastics Film and sheeting Determination of gas-transmission rate Part 2: Equal-pressure method First Edition |
| 94 | ISO 15106.1-2003 | Plastics - Film and Sheeting - Determination of Water Vapour Transmission Rate - Part 1: Humidity Detection Sensor Method First Edition |
| 95 | ISO 15106.2-2003 | Plastics - Film and Sheeting - Determination of Water Vapour Transmission Rate - Part 2: Infrared Detection Sensor Method First Edition |
| 96 | ISO 15106.3-2003 | Plastics - Film and Sheeting - Determination of Water Vapour Transmission Rate - Part 3: Electrolytic Detection Sensor Method First Edition |
| 97 | ISO 1513-1992 | 色漆和清漆试验样品的检验和制备 Paints and varnishes -- Examination and preparation of samples for testing |
| 98 | ISO 15136.1-2001 | 石油和天然气工业的钻孔设备人工升降梯的空腔泵系统第1部分:泵 Downhole Equipment for Petroleum and Natural Gas Industries - Progressing Cavity Pump Systems for Artificial Lift - Part 1: Pumps First Edition |
| 99 | ISO 15138-2000 | 石油和天然气工业海上生产设备加热、通风和空调设备 Petroleum and Natural Gas Industries - Offshore Production Installations - Heating Ventilation and Air-Conditioning First Edition; Technical Corrigendum 1:06-15-2001 |
| 100 | ISO 15141.1-1998 | 食品谷类作物和谷类作物产品中赭曲霉素A的测定第1部分:硅胶净化高效液体色谱法 Foodstuffs - Determination of Ochratoxin A in Cereals and Cereal Products - Part 1: High Performance Liquid Chromatographic Method with Silica Gel Clean Up First Edition |