| 序号 | 标准号 | 标准名称 |
 1 | ISO 14890-2003 | 输送带 具有橡胶或塑料覆盖层的普通用途织物芯输送带 Conveyor belts -- Specification for rubber or plastics covered conveyor belts of textile construction for general use |
| 2 | ISO 14882-2003 | Programming Languages - C++ Second Edition |
| 3 | ISO 14896-2000 | 塑料聚氨酯原材料异氰酸酯的含量测定 Plastics -- Polyurethane raw materials -- Determination of isocyanate content |
| 4 | ISO 14897-2002 | 塑料用于聚氨酯生产的多元醇水含量的测定 Plastics -- Polyols for use in the production of polyurethane -- Determination of water content |
| 5 | ISO 14898-1999 | 塑料用于聚氨酯生产的芳香异氰酸酯酸度测定 Plastics -- Aromatic isocyanates for use in the production of polyurethane -- Determination of acidity |
| 6 | ISO 14899-2001 | 塑料聚氨酯生产中用的多元醇基团的测定 Plastics -- Polyols for use in the production of polyurethane -- Determination of basicity |
| 7 | ISO 14900-2001 | 塑料聚氨酯生产中用的多元醇羟基数的测定 Plastics -- Polyols for use in the production of polyurethane -- Determination of hydroxyl number |
| 8 | ISO 14902-2001 | 动物饲料大豆制品胰蛋白酶抑制剂活性的测定 Animal feeding stuffs -- Determination of trypsin inhibitor activity of soya products |
| 9 | ISO 14910.1-1997 | 塑料热塑聚酯/聚醚和聚酯/聚醚铸模和挤压弹性体第1部分:命名系统和规范基础 Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 1: Designation system and basis for specifications |
| 10 | ISO 14910.2-1997 | 塑料热塑聚酯/聚醚和聚酯/聚醚铸模和挤压弹性体第2部分:试样准备和性能测定 Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 2: Preparation of test specimens and determination of properties |
| 11 | ISO 14906-2004 | 道路运输与交通信息技术 自动收费系统 专用短程通信应用接口的定义 Road transport and traffic telematics -- Electronic fee collection -- Application interface definition for dedicated short-range communication |
| 12 | ISO 14911-1998 | 水质用离子色谱法测定锂离子、钠离子、铵离子、钾离子、锰离子、镁离子、锶离子和钡离子含量水和废水 Water quality -- Determination of dissolved Li+ Na+ NH4+ K+ Mn2+ Ca2+ Mg2+ Sr2+ and Ba2+ using ion chromatography -- Method for water and waste water |
| 13 | ISO 14916-1999 | 热喷涂拉力粘附强度的测定 Thermal spraying -- Determination of tensile adhesive strength |
| 14 | ISO 14917-1999 | 热喷涂术语分类 Thermal spraying -- Terminology classification |
| 15 | ISO 14918-1998 | 热喷涂热喷涂的验收试验 Thermal spraying -- Approval testing of thermal sprayers |
| 16 | ISO 14919-2001 | 热喷涂熔喷和电弧喷涂用线材、杆材和软线分类技术支持条件 Thermal spraying -- Wires rods and cords for flame and arc spraying -- Classification -- Technical supply conditions |
| 17 | ISO 14920-1999 | 热喷镀自熔化合金的熔化和喷镀 Thermal spraying -- Spraying and fusing of self-fluxing alloys |
| 18 | ISO 14915.3-2002 | 多媒体用户接口的软件人类工效学第3部分:媒体选择和组合 Software ergonomics for multimedia user interfaces -- Part 3: Media selection and combination |
| 19 | ISO 14915.1-2002 | 多媒体用户接口的软件人类工效学第1部分:设计原理和框架 Software ergonomics for multimedia user interfaces -- Part 1: Design principles and framework |
| 20 | ISO 14912-2003 | 气体分析 混合气体成分数据的换算 Gas analysis -- Conversion of gas mixture composition data |
| 21 | ISO 14915.2-2003 | 多媒体用户接口用软件人机工效学 第2部分：多媒体制导和控制 Software ergonomics for multimedia user interfaces -- Part 2: Multimedia navigation and control |
| 22 | ISO 14921-2001 | 热喷涂工程元件用热喷镀涂层的应用程序 Thermal spraying -- Procedures for the application of thermally sprayed coatings for engineering components |
| 23 | ISO 14922.1-1999 | 热喷镀热喷镀结构的质量要求第1部分:选择和使用导则 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 1: Guidance for selection and use |
| 24 | ISO 14922.2-1999 | 热喷镀热喷镀结构的质量要求第2部分:综合质量要求 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 2: Comprehensive quality requirements |
| 25 | ISO 14922.3-1999 | 热喷镀热喷镀结构的质量要求第3部分:标准质量要求 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 3: Standard quality requirements |
| 26 | ISO 14922.4-1999 | 热喷镀热喷镀结构的质量要求第4部分:基本质量要求 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 4: Elementary quality requirements |
| 27 | ISO 14935-1998 | 石油及其相关产品耐火流体的吸油绳燃烧持久性测定 Petroleum and related products -- Determination of wick flame persistence of fire-resistant fluids |
| 28 | ISO 14937-2000 | 医疗保健产品的消毒医疗装置用消毒剂特性和消毒过程的开发、证实和常规管理的一般要求 Sterilization of health care products -- General requirements for characterization of a sterilizing agent and the development validation and routine control of a sterilization process for medical devices |
| 29 | ISO 14923-2003 | 热喷涂 热喷涂覆盖层的特性和试验 Thermal spraying -- Characterization and testing of thermally sprayed coatings |
| 30 | ISO 14931-2004 | 皮革 服装皮革的选用指南(不包括毛皮) Leather -- Guide to the selection of leather for apparel (excluding furs) |
| 31 | ISO 14946-2001 | 小型船舶最大荷载能力 Small craft -- Maximum load capacity |
| 32 | ISO 14949-2001 | 外科植入物两节附加加工的硅弹性体 Implants for surgery -- Two-part addition-cure silicone elastomers |
| 33 | ISO 14951.11-1999 | 航天系统流体特性第11部分:氨 Space systems -- Fluid characteristics -- Part 11: Ammonia |
| 34 | ISO 14951.1-1999 | 航天系统流体特性第1部分:氧 Space systems -- Fluid characteristics -- Part 1: Oxygen |
| 35 | ISO 14951.12-1999 | 航天系统流体特性第12部分:二氧化碳 Space systems -- Fluid characteristics -- Part 12: Carbon dioxide |
| 36 | ISO 14951.10-1999 | 航天系统 流体特性 第10部分：水 Space systems -- Fluid characteristics -- Part 10: Water |
| 37 | ISO 14950-2004 | 航天系统 无人航天器操作性能 Space systems -- Unmanned spacecraft operability |
| 38 | ISO 14939-2001 | 动物饲料用高效液相色谱法测定卡巴氧的含量 Animal feeding stuffs -- Determination of carbadox content -- Method using high-performance liquid chromatography |
| 39 | ISO 14943-2004 | 核燃料技术 与核临界安全有关的管理准则 Nuclear fuel technology -- Administrative criteria related to nuclear criticality safety |
| 40 | ISO 14945-2004 | 小艇 加工厂铭牌 Small craft -- Builders plate |
| 41 | ISO 14951.13-1999 | 航天系统流体特性第13部分:呼吸用空气 Space systems -- Fluid characteristics -- Part 13: Breathing air |
| 42 | ISO 14951.2-1999 | 航天系统流体特性第2部分:氢推进剂 Space systems -- Fluid characteristics -- Part 2: Hydrogen propellant |
| 43 | ISO 14951.3-1999 | 航天系统流体特性第3部分:氮 Space systems -- Fluid characteristics -- Part 3: Nitrogen |
| 44 | ISO 14951.4-1999 | 航天系统流体特性第4部分:氦 Space systems -- Fluid characteristics -- Part 4: Helium |
| 45 | ISO 14951.5-1999 | 航天系统流体特性第5部分:四氧化氮推进剂 Space systems -- Fluid characteristics -- Part 5: Nitrogen tetroxide propellant |
| 46 | ISO 14951.3 Technical Corrigendum 1-2000 | 航天系统流体特性第3部分:氮技术勘误1 Space systems - Fluid characteristics - Part 3: Nitrogen; Technical Corrigendum 1 |
| 47 | ISO 14951.4 Technical Corrigendum 1-2000 | 航天系统流体特性第4部分:氦技术勘误1 Space systems - Fluid characteristics - Part 4: Helium; Technical Corrigendum 1 |
| 48 | ISO 14951.6-1999 | 航天系统流体特性第6部分:一甲基联氨推进剂 Space systems -- Fluid characteristics -- Part 6: Monomethylhydrazine propellant |
| 49 | ISO 14951.7-1999 | 航天系统流体特性第7部分:联氨推进剂 Space systems -- Fluid characteristics -- Part 7: Hydrazine propellant |
| 50 | ISO 14951.8-1999 | 航天系统流体特性第8部分:煤油推进剂 Space systems -- Fluid characteristics -- Part 8: Kerosene propellant |
| 51 | ISO 14951.9-1999 | 航天系统流体特性第9部分:氩 Space systems -- Fluid characteristics -- Part 9: Argon |
| 52 | ISO 14951.9 Technical Corrigendum 1-2000 | 航天系统流体特性第9部分:氩技术勘误1 Space systems - Fluid characteristics - Part 9: Argon; Technical Corrigendum 1 |
| 53 | ISO 14952.1-2003 | 航天系统 流体系统表面清洁度 第1部分：词汇 Space systems -- Surface cleanliness of fluid systems -- Part 1: Vocabulary |
| 54 | ISO 14952.2-2003 | 航天系统 流体系统的表面清洁度 第2部分：清洁度等级 Space systems -- Surface cleanliness of fluid systems -- Part 2: Cleanliness levels |
| 55 | ISO 14953-2000 | 航天系统结构设计发射的飞行器的静态合格性试验的负载水平的测定 Space systems -- Structural design -- Determination of loading levels for static qualification testing of launch vehicles |
| 56 | ISO 14956-2002 | 空气质量与规定的测量不确定度的比较评价测量程序的适用性 Air quality -- Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty |
| 57 | ISO 14957-1996 | Information Technology - Notation of Format for Data Element Values First Edition |
| 58 | ISO 1496.1 AMD 1-1993 | 货运集装箱系列1规范和试验第1部分:一般用途货物集装箱第1次修改:1AAA和1BBB集装箱 Series 1 freight containers; specification and testing; part 1: general cargo containers for general purposes; amendment 1: 1AAA and 1BBB containers |
| 59 | ISO 14952.3-2003 | 航天系统 流体系统的表面清洁度 第3部分：测定不挥发残余物和污粒的分析程序 Space systems -- Surface cleanliness of fluid systems -- Part 3: Analytical procedures for the determination of nonvolatile residues and particulate contamination |
| 60 | ISO 14952.4-2003 | 航天系统 流体系统的表面清洁度 第4部分：初洗程序 Space systems -- Surface cleanliness of fluid systems -- Part 4: Rough-cleaning processes |
| 61 | ISO 14952.5-2003 | 航天系统 流体系统的表面清洁度 第5部分：烘干程序 Space systems -- Surface cleanliness of fluid systems -- Part 5: Drying processes |
| 62 | ISO 14952.6-2003 | 航天系统 流体系统的表面清洁度 第6部分：精洗程序 Space systems -- Surface cleanliness of fluid systems -- Part 6: Precision-cleaning processes |
| 63 | ISO 14954-2005 | 航天系统 动态和静态分析 数学模型的交换 Space systems -- Dynamic and static analysis -- Exchange of mathematical models |
| 64 | ISO 14960-2004 | 无内胎轮胎 气门嘴和零件 试验方法 Tubeless tyres -- Valves and components -- Test methods |
| 65 | ISO 1496.4-1991 | 货运集装箱系列1规范和试验第4部分:不加压的散料集装箱 Series 1 freight containers -- Specification and testing -- Part 4: Non-pressurized containers for dry bulk |
| 66 | ISO 14964-2000 | 机械振动固定结构的振动测量质量管理的特殊要求和振动的评价 Mechanical vibration and shock -- Vibration of stationary structures -- Specific requirements for quality management in measurement and evaluation of vibration |
| 67 | ISO 1496.1-1990 | 货运集装箱系列1规范和试验第1部分:一般用途货物集装箱 Series 1 freight containers -- Specification and testing -- Part 1: General cargo containers for general purposes |
| 68 | ISO 1496.2-1996 | 第1系列货运集装箱的规范和试验第2部分:保温集装箱 Series 1 freight containers -- Specification and testing -- Part 2: Thermal containers |
| 69 | ISO 14962-1997 | 空间数据和信息传输系统ASCII编码英语 Space data and information transfer systems -- ASCII encoded English |
| 70 | ISO 1496.3-1995 | 货运集装箱系列1规范和试验第3部分:液体和气体用罐式集装箱 Series 1 freight containers -- Specification and testing -- Part 3: Tank containers for liquids gases and pressurized dry bulk |
| 71 | ISO 1496.1 AMD 2-1998 | 货运集装箱系列1规范和试验第1部分:一般用途货物集装箱修改件2 Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purpose; Amendment 2 |
| 72 | ISO 14961-2002 | 空间数据和信息传输系统参数值语言规范 Space data and information transfer systems -- Parameter value language specification |
| 73 | ISO 14968-1999 | 纸和纸板切割尺寸办公室用纸一包纸卷曲的测量 Paper and board -- Cut-size office paper -- Measurement of curl in a pack of sheets |
| 74 | ISO 14972-1998 | 只用于外周内导管的灭菌塞 Sterile obturators for single use with over-needle peripheral intravascular catheters |
| 75 | ISO 14975-2000 | 表面化学分析信息格式 Surface chemical analysis -- Information formats |
| 76 | ISO 14976-1998 | 表面化学分析数据传输格式 Surface chemical analysis -- Data transfer format |
| 77 | ISO 14977-1996 | 信息技术语法元语言扩展BNF Information Technology - Syntactic Metalanguage - Extended BNF First Edition |
| 78 | ISO 14981-2000 | 制图技术过程控制书画用反射光密度计的光学、几何和计量要求 Graphic technology -- Process control -- Optical geometrical and metrological requirements for reflection densitometers for graphic arts use |
| 79 | ISO 14982-1998 | 农业和林业机械电磁兼容性试验方法和验收标准 Agricultural and forestry machinery -- Electromagnetic compatibility -- Test methods and acceptance criteria |
| 80 | ISO 14985-1999 | 技术绘图的硬拷贝输出控制文件结构规范 Hard-copy output of engineering drawings -- Specification for the structure of control files |
| 81 | ISO 14971-2000 | 医疗装置医疗装置风险管理的应用 Medical devices -- Application of risk management to medical devices |
| 82 | ISO 14993-2001 | 金属及合金的腐蚀包括循环暴露于盐雾、"干"和"湿"条件下的加速试验 Corrosion of metals and alloys -- Accelerated testing involving cyclic exposure to salt mist "dry" and "wet" conditions |
| 83 | ISO 15002-2000 | 连接医用气体管道系统终端装置的流量测量装置 Flow-metering devices for connection to terminal units of medical gas pipeline systems |
| 84 | ISO 15004-1997 | 眼科仪器基本要求和试验方法 Ophthalmic instruments -- Fundamental requirements and test methods |
| 85 | ISO 15005-2002 | 道路车辆运输信息和控制系统的人类工效学特性对话管理原则和一致性程序 Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures |
| 86 | ISO 15007.1-2002 | 道路车辆与运输信息和控制系统有关的司机目视行为的测定第1部分: 定义和参数 Road vehicles -- Measurement of driver visual behaviour with respect to transport information and control systems -- Part 1: Definitions and parameters |
| 87 | ISO 15007.2-2001 | 道路车辆驾驶员对运输信息和控制系统的可视行为的测量第2部分:设备和程序 Road Vehicles - Measurement of Driver Visual Behaviour with Respect to Transport Information and Control Systems - Part 2: Equipment and Procedures First Edition |
| 88 | ISO 14997-2003 | 光学和光学仪器 光学零件表面缺陷的试验方法 Optics and optical instruments -- Test methods for surface imperfections of optical elements |
| 89 | ISO 15008-2003 | 道路车辆 运输信息和控制系统的人机工效学 车内可视表示的要求和评定程序 Road vehicles -- Ergonomic aspects of transport information and control systems -- Specifications and compliance procedures for in-vehicle visual presentation |
| 90 | ISO 15001-2003 | 麻醉呼吸设备 与氧的相容性 Anaesthetic and respiratory equipment -- Compatibility with oxygen |
| 91 | ISO 15006-2004 | 道路车辆 交通信息和控制系统的人类工效学 车辆发声的要求和评定方法 Road vehicles -- Ergonomic aspects of transport information and control systems -- Specifications and compliance procedures for in-vehicle auditory presentation |
| 92 | ISO 15010-1998 | 输液和输注瓶用一次性悬吊装置要求和试验方法 Disposable hanging devices for transfusion and infusion bottles -- Requirements and test methods |
| 93 | ISO 15011.1-2002 | 焊接和有关过程中的健康和安全电弧焊接产生的取样烟尘和气体的实验室方法第1部分:颗粒烟尘分析的排放率测定和取样 Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases generated by arc welding -- Part 1: Determination of emission rate and sampling for analysis of particulate fume |
| 94 | ISO 15013-1998 | 聚丙烯挤压片材(PP)要求和试验方法 Extruded sheets of polypropylene (PP) -- Requirements and test methods |
| 95 | ISO 15016-2002 | 船舶和海上技术用速度试验数据分析法对速度和动力性能的评定导则 Ships and marine technology -- Guidelines for the assessment of speed and power performance by analysis of speed trial data |
| 96 | ISO 150-1980 | 色漆和清漆用生、精制和熟亚麻子油规范和试验方法 Raw refined and boiled linseed oil for paints and varnishes -- Specifications and methods of test |
| 97 | ISO 1502-1996 | ISO一般用途米制螺纹量规和量规检验 ISO general-purpose metric screw threads -- Gauges and gauging |
| 98 | ISO 15009-2002 | 土壤质量气相测谱法测定挥发性芳烃、萘和挥发性卤化烃含量热解析的净化和收集法 Soil quality -- Gas chromatographic determination of the content of volatile aromatic hydrocarbons naphthalene and volatile halogenated hydrocarbons -- Purge-and-trap method with thermal desorption |
| 99 | ISO 15011.3-2002 | 焊接和相关工艺的卫生和安全电弧焊产生的烟和气体取样的实验室法第3部分:用固定点测量法测定臭氧浓度 Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases generated by arc welding -- Part 3: Determination of ozone concentration using fixed point measurements |
| 100 | ISO 15011.2-2003 | 焊接和相关工艺的卫生与安全 通过弧焊的取样烟尘和产生气体的实验室方法 第2部分：除臭氧外气体排放速率的测定 Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases generated by arc welding -- Part 2: Determination of emission rates of gases except ozone |