| 序号 | 标准号 | 标准名称 |
 1 | ISO 14577.3-2002 | 金属材料硬度和材料参数的仪器压痕试验第3部分:硬度标准块的校准 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks |
| 2 | ISO 14576-1999 | 信息技术同步分散传输式系统总线逻辑层 Information technology Synchronous split transfer type system bus (STbus) Logical layer First Edition |
| 3 | ISO 1458-2002 | 金属镀层镍的电镀层 Metallic coatings -- Electrodeposited coatings of nickel |
| 4 | ISO 14584-2001 | 沉头内六角螺钉 Hexalobular socket raised countersunk head screws |
| 5 | ISO 14585-2001 | 平头内六角攻丝螺钉 Hexalobular socket pan head tapping screws |
| 6 | ISO 14586-2001 | 沉头内六角攻丝螺钉 Hexalobular Socket Countersunk Head Tapping Screws First Edition |
| 7 | ISO 14587-2001 | 半沉头(椭圆形)内六角攻丝螺钉 Hexalobular socket raised countersunk (oval) head tapping screws |
| 8 | ISO 14588-2000 | 沉头铆钉术语和定义 Blind rivets -- Terminology and definitions |
| 9 | ISO 14589-2000 | 沉头铆钉机械试验 Blind rivets -- Mechanical testing |
| 10 | ISO 14592.2-2002 | 水质评价低浓度时有机化合物有氧生物降解能力第2部分:附有生物量的连续流动河床模型 Water quality -- Evaluation of the aerobic biodegradability of organic compounds at low concentrations -- Part 2: Continuous flow river model with attached biomass |
| 11 | ISO 14592.1-2002 | 水质评价低浓度时有机化合物有氧生物降解能力第1部分:地表水或地表水/悬浮质泥沙摇瓶试验 Water quality -- Evaluation of the aerobic biodegradability of organic compounds at low concentrations -- Part 1: Shake-flask batch test with surface water or surface water/sediment suspensions |
| 12 | ISO 14590-2005 | 具有高拉伸强度和改善成型低屈服点的冷轧钢片 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability |
| 13 | ISO 14593-1999 | 水质含水介质中有机化合物基本好氧生物降解能力的评定密封容器中无机碳的分析方法(CO2液上气体试验) Water quality -- Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium -- Method by analysis of inorganic carbon in sealed vessels (CO2 headspace test) |
| 14 | ISO 14596-1998 | 石油产品硫含量测定波长色散X射线荧光光谱法 Petroleum products -- Determination of sulfur content -- Wavelength-dispersive X-ray fluorescence spectrometry |
| 15 | ISO 14597-1997 | 液体燃料检验钒和镍含量的测定X射线荧光分析法 Petroleum products -- Determination of vanadium and nickel content -- Wavelength-dispersive X-ray fluorescence spectrometry |
| 16 | ISO 14598.1-1999 | 信息技术软件生产评价第1部分:总览 Information Technology - Software Product Evaluation - Part 1: General Overview First Edition |
| 17 | ISO 14598.2-2000 | 软件工程产品评价第2部分:计划和管理 Software Engineering - Product Evaluation - Part 2: Planning and Management First Edition |
| 18 | ISO 14596 Technical Corrigendum 1-1999 | 石油产品硫含量测定波长色散X射线荧光光谱法技术勘误1 Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry; Technical corrigendum 1 |
| 19 | ISO 14595-2003 | 微束分析 电子探针微量分析 认证标准物质规范(CRMs)的导则 Microbeam analysis -- Electron probe microanalysis -- Guidelines for the specification of certified reference materials (CRMs) |
| 20 | ISO 14594-2003 | 微束分析 电子试样微量分析 波长离散分光计实验参数的测定导则 Microbeam analysis -- Electron probe microanalysis -- Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy |
| 21 | ISO 14598.3-2000 | 软件工程产品评价第3部分:开发者开发过程 Software Engineering - Product Evaluation - Part 3: Process for Developers First Edition |
| 22 | ISO 14598.4-1999 | 软件工程产品评价第4部分:需要者要求的处理 Software Engineering - Product Evaluation - Part 4: Process for Acquirers First Edition |
| 23 | ISO 14598.5-1998 | 信息技术软件生产评价第5部分:评价者要求的处理 Information Technology - Software Product Evaluation - Part 5: Process for Evaluators First Edition |
| 24 | ISO 14598.6-2001 | 软件工程产品评价第6部分:评价模式的文献 Software Engineering - Product Evaluation - Part 6: Documentation of Evaluation Modules First Edition |
| 25 | ISO 1460-1992 | 金属镀层铁类材料的热浸镀锌涂层用重量测定法测定单位面积重量 Metallic coatings -- Hot dip galvanized coatings on ferrous materials -- Gravimetric determination of the mass per unit area |
| 26 | ISO 14602-1998 | 稳定的外科植入物骨接合术用植入物特殊要求 Non-active surgical implants -- Implants for osteosynthesis -- Particular requirements |
| 27 | ISO 14606-2000 | 表面化学分析溅射深度剖面测定作为参考材料的层系统最优化 Surface chemical analysis -- Sputter depth profiling -- Optimization using layered systems as reference materials |
| 28 | ISO 1461-1999 | 加工的钢铁制品的热镀锌层规范和试验方法 Hot dip galvanized coatings on fabricated iron and steel articles -- Specifications and test methods |
| 29 | ISO 14607-2002 | 外科植入物乳房植入物的特殊要求 Implants for surgery -- Specific requirements for mammary implants |
| 30 | ISO 14612-2004 | 船舶与海上技术 驾驶台设计和相关设备 对集中一体化驾驶台功能的要求和指南 Ships and marine technology -- Ships bridge layout and associated equipment -- Additional requirements and guidelines for centralized and integrated bridge functions |
| 31 | ISO 14615-1997 | 粘结剂结构粘结接头的耐久性有荷载并暴露在湿度和温度之下 Adhesives -- Durability of structural adhesive joints -- Exposure to humidity and temperature under load |
| 32 | ISO 14616-1997 | 塑料聚乙烯乙烯共聚物以及它们的混合物的热可缩薄膜收缩应力的测定 Plastics -- Heatshrinkable films of polyethylene ethylene copolymers and their mixtures -- Determination of shrinkage stress and contraction stress |
| 33 | ISO 14617.12-2002 | 图表用图形符号第12部分:分离、净化和混合装置 Graphical symbols for diagrams -- Part 12: Devices for separating purification and mixing |
| 34 | ISO 14617.11-2002 | 图表用图形符号第11部分:热传递装置和热发电机 Graphical symbols for diagrams -- Part 11: Devices for heat transfer and heat engines |
| 35 | ISO 14617.10-2002 | 图表用图形符号第10部分:液压变流器 Graphical symbols for diagrams -- Part 10: Fluid power converters |
| 36 | ISO 14617.2-2002 | 图表用图形符号第2部分:通用符号 Graphical symbols for diagrams -- Part 2: Symbols having general application |
| 37 | ISO 14617.1-2002 | 图表用图形符号第1部分:一般信息和索引 Graphical symbols for diagrams -- Part 1: General information and indexes |
| 38 | ISO 14617.15-2002 | 图表用图形符号第15部分:安装图和网络图 Graphical symbols for diagrams -- Part 15: Installation diagrams and network maps |
| 39 | ISO 14617.13-2004 | 图示用图形符号 第13部分：材料处理设备 Graphical symbols for diagrams -- Part 13: Devices for material processing |
| 40 | ISO 14617.14-2004 | 图示用图形符号 第14部分：材料储运设备 Graphical symbols for diagrams -- Part 14: Devices for transport and handling of material |
| 41 | ISO 14620.2-2000 | 空间系统安全要求第2部分:发射场操作 Space systems -- Safety requirements -- Part 2: Launch site operations |
| 42 | ISO 14617.9-2002 | 图表用图形符号第9部分:泵、压缩机和风扇 Graphical symbols for diagrams -- Part 9: Pumps compressors and fans |
| 43 | ISO 14617.8-2002 | 图表用图形符号第8部分:阀门和气流调节器 Graphical symbols for diagrams -- Part 8: Valves and dampers |
| 44 | ISO 14617.7-2002 | 图表用图形符号第7部分:基本机械组件 Graphical symbols for diagrams -- Part 7: Basic mechanical components |
| 45 | ISO 14617.6-2002 | 图表用图形符号第6部分:测量和控制功能 Graphical symbols for diagrams -- Part 6: Measurement and control functions |
| 46 | ISO 14617.5-2002 | 图表用图形符号第5部分:测量和控制装置 Graphical symbols for diagrams -- Part 5: Measurement and control devices |
| 47 | ISO 14617.4-2002 | 图表用图形符号第4部分:传动装置和相关装置 Graphical symbols for diagrams -- Part 4: Actuators and related devices |
| 48 | ISO 14617.3-2002 | 图表用图形符号第3部分:连接件和相关装置 Graphical symbols for diagrams -- Part 3: Connections and related devices |
| 49 | ISO 14620.1-2002 | 航天系统安全要求第1部分:系统安全 Space systems -- Safety requirements -- Part 1: System safety |
| 50 | ISO 14619-2003 | 航天系统 航天实验 一般要求 Space systems -- Space experiments -- General requirements |
| 51 | ISO 14622-2000 | 航空系统结构设计负载和外界感应因素 Space systems -- Structural design -- Loads and induced environment |
| 52 | ISO 14625-1999 | 空载系统发射、着陆或回收场用地面支持设备一般要求 Space systems -- Ground support equipment for use at launch landing or retrieval sites-- General requirements |
| 53 | ISO 14624.1-2003 | 航天系统 材料的安全与相容性 第1部分：材料向上可燃性的测定 Space systems Safety and compatibility of materials Part 1: Determination of upward flammability of materials First Edition |
| 54 | ISO 14624.2-2003 | 航天系统 材料的安全与相容性 第2部分：电线绝缘和辅料可燃性的测定 Space systems -- Safety and compatibility of materials -- Part 2: Determination of flammability of electrical-wire insulation and accessory materials |
| 55 | ISO 14624.4-2003 | 航天系统 材料的安全与相容性 第4部分：高压气态氧或富氧环境下材料向上可燃性的测定 Space systems -- Safety and compatibility of materials -- Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments |
| 56 | ISO 14621.2-2003 | 航天系统 电气电子和机电(EEE)部件 第2部分：控制程序的要求 Space systems -- Electrical electronic and electromechanical (EEE) parts -- Part 2: Control programme requirements |
| 57 | ISO 14621.1-2003 | 航天系统 电气、电子和机电(EEE)零件 第1部分：零件管理 Space systems -- Electrical electronic and electromechanical (EEE) parts -- Part 1: Parts management |
| 58 | ISO 14623-2003 | 航天系统 压力容器和压力结构 设计和操作 Space systems - Pressure vessels and pressurized structures -- Design and operation |
| 59 | ISO 14624.3-2005 | 航天系统 材料的安全与相容性 第3部分：材料和安装部件排气产物的测定 Space systems -- Safety and compatibility of materials -- Part 3: Determination of offgassed products from materials and assembled articles |
| 60 | ISO 14620.3-2005 | 航天系统 安全要求 第3部分：飞行安全系统 Space systems -- Safety requirements -- Part 3: Flight safety systems |
| 61 | ISO 14631-1999 | 冲击改良的聚苯乙烯(PS-I)的挤压片要求和试验方法 Extruded sheets of impact-modified polystyrene (PS-I) -- Requirements and test methods |
| 62 | ISO 1463-1982 | 金属和氧化物镀层镀层厚度的测定显微镜法 Metallic and Oxide Coatings - Measurement of Coating Thickness - Microscopical Method Second Edition; CEN EN ISO 1463: 1994; PNS 666: 1990 |
| 63 | ISO 14632-1998 | 聚乙烯(PE-HD)的挤压片材要求和试验方法 Extruded sheets of polyethylene (PE-HD) -- Requirements and test methods |
| 64 | ISO 14635.1-2000 | 齿轮FZG试验规程第1部分:有关齿轮咬接油的载重量的FZG试验方法A/83/90 Gears -- FZG test procedures -- Part 1: FZG test method A/83/90 for relative scuffing load-carrying capacity of oils |
| 65 | ISO 1464-1985 | 航空航天三脚千斤顶间隙尺寸 Aerospace -- Tripod jacks -- Clearance dimensions 6 |
| 66 | ISO 14635-2 | (Pending)Gears - FZG Test Procedures - Part 2: FZG Step Load Test A10/16 6R/120 for Relative Scuffing Load Carrying Capacity of High EP Oils First Edition |
| 67 | ISO 1463-2003 | 金属和氧化物镀层镀层厚度的测定显微镜法 Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method |
| 68 | ISO 14635.2-2004 | 齿轮 FZG试验程序 第2部分：高EP油相对咬合承载能力的FZG分步负载试验A10/16、6R/120 Gears -- FZG test procedures -- Part 2: FZG step load test A10/16 6R/120 for relative scuffing load-carrying capacity of high EP oils |
| 69 | ISO 14630-2005 | 非活动外科植入物的一般要求 Non-active surgical implants -- General requirements |
| 70 | ISO 14637-2004 | 牛乳 尿含量的测定 pH差值酶法(标准法) Milk -- Determination of urea content -- Enzymatic method using difference in pH (Reference method) |
| 71 | ISO 14644.1-1999 | 无菌室和相关控制环境第1部分:空气清洁度分级 Cleanrooms and associated controlled environments -- Part 1: Classification of air cleanliness |
| 72 | ISO 14644.2-2000 | 无菌室和相关控制环境第2部分:检测和监控与ISO 14644-1连续相符的规范 Cleanrooms and Associated Controlled Environments - Part 2: Specifications for Testing and Monitoring to Prove Continued Compliance with ISO 14644-1 First Edition |
| 73 | ISO 14644.4-2001 | 无菌室和相关受控环境第4部分:设计、建造和运行 Cleanrooms and associated controlled environments -- Part 4: Design construction and start-up |
| 74 | ISO 14647-2000 | 金属覆层金属基质金覆层孔隙率的测定硝酸蒸发试验 Metallic coatings -- Determination of porosity in gold coatings on metal substrates -- Nitric acid vapour test |
| 75 | ISO 14648.1-2001 | 缩微图形学采用内部显示系统生成图象的COM记录仪的质量控制第1部分:软件试验目标的特性 Micrographics -- Quality control of COM recorders that generate images using a single internal display system -- Part 1: Characteristics of the software test target |
| 76 | ISO 14648.2-2001 | 缩微图形学采用内部显示系统生成图象的COM记录仪的质量控制第2部分:使用方法 Micrographics -- Quality control of COM recorders that generate images using a single internal display system -- Part 2: Method of use |
| 77 | ISO 14644 SET | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS SET INCLUDES: ISO 14644-1 ISO 14644-2 ISO DIS 14644-3 ISO 14644-4 AND ISO DIS 14644-5 |
| 78 | ISO 14644.5-2004 | 洁净室和相关控制环境 第5部分：操作 Cleanrooms and associated controlled environments -- Part 5: Operations |
| 79 | ISO 14644.7-2004 | 洁净室和相关控制环境 第7部分：分离设备(洁净空气罩、手套盒、绝缘子和微环境) Cleanrooms and associated controlled environments -- Part 7: Separative devices (clean air hoods gloveboxes isolators and mini-environments) |
| 80 | ISO 14649.10-2004 | 工业自动化系统和集成 物理设备控制 计算机数字控制器的数据模型 第10部分：一般过程数据 Industrial automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 10: General process data |
| 81 | ISO 14651-2001 | 信息技术国际串命令和比较比较字符串的方法和共同模板特制命令描述 Information Technology - International String Ordering and Comparison - Method for Comparing Character Strings and Description of the Common Template Tailorable Ordering First Edition; Amendment 1 8/1/2003 |
| 82 | ISO 1465-1989 | 飞机液态氧灌充连接器连接尺寸 Aircraft -- Liquid oxygen replenishment couplings -- Mating dimensions |
| 83 | ISO 14654-1999 | 混凝土增强用环氧树脂涂覆钢 Epoxy-coated steel for the reinforcement of concrete |
| 84 | ISO 14655-1999 | 预应力混凝土用环氧树脂涂覆的绞合线 Epoxy-coated strand for the prestressing of concrete |
| 85 | ISO 14656-1999 | 加筋混凝土用钢的涂层的环氧树脂粉末和密封材料 Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete |
| 86 | ISO 14660.1-1999 | 产品几何量技术规范(GPS)几何要素第1部分:基本术语和定义 Geometrical Product Specifications (GPS) -- Geometrical features -- Part 1: General terms and definitions |
| 87 | ISO 14651 FDAM 1-2002 | (Draft)Information Technology - International String Ordering and Comparison - Method for Comparing Character Strings and Description of the Common Template Tailorable Ordering Amendment 1 |
| 88 | ISO 14649.1-2003 | 工业自动化系统和集成 物理设备控制 计算机数字控制器的数据模型 第1部分：总览和基本原理 Industrial automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 1: Overview and fundamental principles |
| 89 | ISO 14657-2005 | 混凝土配筋用镀锌钢 Zinc-coated steel for the reinforcement of concrete |
| 90 | ISO 14649.11-2004 | 工业自动化系统和集成 物理设备控制 计算机数字控制器的数据模型 第11部分：铣削工艺数据 Industrial automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 11: Process data for milling |
| 91 | ISO 14660.2-1999 | 产品几何量技术规范几何要素第2部分:圆柱体和圆锥体的提取中心线、提取中心面和提取要素的局部尺寸 Geometrical Product Specifications (GPS) -- Geometrical features -- Part 2: Extracted median line of a cylinder and a cone extracted median surface local size of an extracted feature |
| 92 | ISO 14661-2000 | 工业用热涡轮机(蒸气涡轮机、气体膨胀式轮机)一般要求 Thermal turbines for industrial applications (steam turbines gas expansion turbines) -- General requirements |
| 93 | ISO 1466-1973 | 飞机的拉杆操纵手控开关性能要求 Lever-operated manual switches for aircraft -- Performance requirements |
| 94 | ISO 14662-1997 | 信息技术开放-EDI参考模式 Information Technology - Open-Edi Reference Model First Edition |
| 95 | ISO 14663.1-1999 | 塑料乙烯/乙烯醇(EVOH)共聚物注模和压模材料第1部分:标识系统和规范基础 Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications |
| 96 | ISO 14663.2-1999 | 塑料乙烯/乙烯醇(EVOH)共聚物注模和压模材料第2部分:试验样品的制备和特性测定 Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties |
| 97 | ISO 14669-1999 | 水质海洋甲壳纲致命毒素的测定 Water quality -- Determination of acute lethal toxicity to marine copepods (Copepoda Crustacea) |
| 98 | ISO 14661 AMD 1-2002 | 工业用热涡轮机(蒸汽涡轮机、气体膨胀式轮机)一般要求修改件A1:工业用热涡轮机数据表 Thermal turbines for industrial applications (steam turbines gas expansion turbines) - General requirements; Amendment A1: Data sheets for thermal turbines for industrial applications |
| 99 | ISO 14662-2004 | Information Technology - Open-Edi Reference Model Second Edition |
| 100 | ISO 1467-1973 | 飞机的一般用途推拉式单极断路器性能要求 General purpose push-pull single-pole circuit-breakers for aircraft -- Performance requirements |