| 序号 | 标准号 | 标准名称 |
 1 | ISO 14015-2001 | 环境管理场所和组织机构的环境评定 Environmental management -- Environmental assessment of sites and organizations (EASO) |
| 2 | ISO 140.2 Technical Corrigendum 1-1993 | 声学建筑物和建筑构件的隔音测量第2部分:精度数据的测定检验和应用技术勘误1-9 Acoustics; measurement of sound insulation in buildings and of building elements; part 2: determination verification and application of precision data; technical corrigendum 1 |
| 3 | ISO 140.14-2004 | 声学建筑物和建筑构件的隔声测量第14部分:试验场中特殊情况指南 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 14: Guidelines for special situations in the field |
| 4 | ISO 140.11-2005 | Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors |
| 5 | ISO 14004-2004 | 环境管理系统原理、系统和技术支持通用指南 Environmental management systems -- General guidelines on principles systems and support techniques |
| 6 | ISO 14020-2000 | 环境标签和说明一般原则 Environmental labels and declarations -- General principles |
| 7 | ISO 14021-1999 | 环境标签和声明自声明的环境要求(II型环境标签) Environmental labels and declarations -- Self-declared environmental claims (Type II environmental labelling) |
| 8 | ISO 140.2-1991 | 声学建筑物和建筑构件的隔音测量第2部分:精确数据的确定验证和应用 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 2: Determination verification and application of precision data |
| 9 | ISO 1402-1994 | 橡胶和塑料软管及软管组件液压静力试验 Rubber and plastics hoses and hose assemblies -- Hydrostatic testing |
| 10 | ISO 14024-1999 | 环境标签和声明:I型环境标签规则和过程 Environmental labels and declarations -- Type I environmental labelling -- Principles and procedures |
| 11 | ISO 14031-1999 | 环境管理环境性能评价指南 Environmental management -- Environmental performance evaluation -- Guidelines |
| 12 | ISO 1403-2005 | 一般用途的织物增强的输水橡胶软管规范 Rubber hoses textile-reinforced for general-purpose water applications -- Specification |
| 13 | ISO 14040-1997 | 环境管理生物圈评价原则和框架 Environmental management -- Life cycle assessment -- Principles and framework |
| 14 | ISO 14041-1998 | 环境管理生物圈评价目标和范围的定义及资源分析 Environmental management -- Life cycle assessment -- Goal and scope definition and inventory analysis |
| 15 | ISO 140.4-1998 | 声学建筑物和建筑构件的隔音测量第4部分:房间之间气载声音隔绝的场测量 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 4: Field measurements of airborne sound insulation between rooms |
| 16 | ISO 14042-2000 | 环境管理生物圈评定生物圈影响评定 Environmental management -- Life cycle assessment -- Life cycle impact assessment |
| 17 | ISO 14043-2000 | 环境管理生物圈评定生物圈解释 Environmental management -- Life cycle assessment -- Life cycle interpretation |
| 18 | ISO 14050-2002 | 环境管理词汇 Environmental management -- Vocabulary |
| 19 | ISO 140.5-1998 | 声学建筑物和建筑构件的隔音测量第5部分:正面构件和正面的气载声音隔绝的现场测量 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 5: Field measurements of airborne sound insulation of faade elements and faades |
| 20 | ISO 140.6-1998 | 声学建筑物和建筑构件的隔音测量第6部分:地板冲击声隔绝的实验室测量 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact sound insulation of floors |
| 21 | ISO 1407-1992 | 橡胶溶剂萃液的测定 Rubber -- Determination of solvent extract |
| 22 | ISO 140.7-1998 | 声学建筑物和建筑构件的隔音测量第7部分:地板冲击声隔绝的场测量 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor |
| 23 | ISO 1408-1995 | 橡胶炭黑含量的测定热解的和化学的降解法 Rubber -- Determination of carbon black content -- Pyrolytic and chemical degradation methods |
| 24 | ISO 140.8-1997 | 声学建筑物和建筑构件的隔音测量第8部分:减少对标准地面覆盖层的撞击噪音传播的实验室测量 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor |
| 25 | ISO 140.9-1985 | 声学建筑物和建筑构件的隔音测量第9部分:悬吊式天花板上有压力通风的室对室气载音响隔离的实验室测量 Acoustics -- Measurements of sound insulation in buildings and of building elements -- Part 9: Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it |
| 26 | ISO 1409-1995 | 塑料/橡胶聚合物的含水分散体和橡胶胶乳(天然的和合成的)用环形试验法测定表面张力 Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of surface tension by the ring method |
| 27 | ISO 14102-1995 | 信息技术CASE工具的评估和选择导则 Information Technology - Guideline for the Evaluation and Selection of CASE Tools First Edition |
| 28 | ISO 14111-1997 | 天然气示踪分析用导则 Natural gas -- Guidelines to traceability in analysis |
| 29 | ISO 14112-1996 | 气焊设备气硬焊和气焊用小型设备 Gas welding equipment -- Small kits for gas brazing and welding |
| 30 | ISO 14104-1997 | Gears -- Surface temper etch inspection after grinding |
| 31 | ISO 14096.2-2005 | Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 2: Minimum requirements |
| 32 | ISO 14096.1-2005 | Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 1: Definitions quantitative measurements of image quality parameters standard reference film and qualitative control |
| 33 | ISO 14113-1997 | 气焊设备能承受最大检验设计气压为450巴的压缩和液化气用橡胶和塑料软管组件 Gas welding equipment -- Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar |
| 34 | ISO 14114-1999 | 气焊设备焊接切割和连接过程的乙炔多功能系统一般要求 Gas welding equipment -- Acetylene manifold systems for welding cutting and allied processes -- General requirements |
| 35 | ISO 14118-2000 | 机械安全意外启动的防护 Safety of machinery -- Prevention of unexpected start-up |
| 36 | ISO 14119-1998 | 机械安全有关保护联索紧装置设计和选则原则 Safety of machinery -- Interlocking devices associated with guards -- Principles for design and selection |
| 37 | ISO 141-1976 | 纺织机械和附件卷纬机和交叉卷绕络筒机左、右侧的定义 Textile machinery and accessories -- Pirn winders and cross winders -- Definition of left and right sides |
| 38 | ISO 14120-2002 | 机械安全保护装置固定和可移动保护装置的设计和制造的一般要求 Safety of machinery -- Guards -- General requirements for the design and construction of fixed and movable guards |
| 39 | ISO 14121-1999 | 机械安全风险评估规则 Safety of machinery -- Principles of risk assessment |
| 40 | ISO 14122.1-2001 | 机器安全机器接近的固定方式第1部分:两种水平之间的固定方式的选择 Safety of machinery -- Permanent means of access to machinery -- Part 1: Choice of fixed means of access between two levels |
| 41 | ISO 14122.2-2001 | 机器安全机器接近的固定方式第2部分:工作平台和通路 Safety of machinery -- Permanent means of access to machinery -- Part 2: Working platforms and walkways |
| 42 | ISO 14122.3-2001 | 机器安全机器接近的固定方式第3部分:楼梯梯子和护栏 Safety of machinery -- Permanent means of access to machinery -- Part 3: Stairs stepladders and guard-rails |
| 43 | ISO 14123.1-1998 | 机械安全机械发射有害物质对健康危害的减少第1部分:机械制造的原则和规范 Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 1: Principles and specifications for machinery manufacturers |
| 44 | ISO 14123.2-1998 | 机械安全机械发射有害物质对健康危害的减少第2部分:检定程序的主要工艺 Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 2: Methodology leading to verification procedures |
| 45 | ISO 14125-1998 | 纤维增强塑料复合材料挠性性能的测定 Fibre-reinforced plastic composites -- Determination of flexural properties |
| 46 | ISO 14126-1999 | 纤维增强塑料混合物水平方向压缩能力的测定 Fibre-reinforced plastic composites -- Determination of compressive properties in the in-plane direction |
| 47 | ISO 14129-1997 | 纤维增强塑料复合物用<+->45°拉伸试验方法测定包括平面剪切模数和强度在内的平面剪切应力/剪应变反应 Fibre-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response including the in-plane shear modulus and strength by the plus or minus 45 degree tension test method |
| 48 | ISO 14125 Technical Corrigendum 1-2001 | 纤维增强塑料弯曲性能测定技术勘误1 Fibre-reinforced plastic composites - Determination of flexural properties; Technical Corrigendum 1 |
| 49 | ISO 14126 Technical Corrigendum 1-2001 | 纤维增强塑料组成压缩性能的测定技术勘误1 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction; Technical corrigendum 1 |
| 50 | ISO 14122.4-2004 | 机械安全 接近机械的固定方式 第4部分：固定梯 Safety of machinery -- Permanent means of access to machinery -- Part 4: Fixed ladders |
| 51 | ISO 14130-1997 | 纤维增强塑料合成物短梁层间切变强度法 Fibre-reinforced plastic composites -- Determination of apparent interlaminar shear strength by short-beam method |
| 52 | ISO 1413-1984 | 计时仪器防震表 Horology -- Shock-resistant watches |
| 53 | ISO 14132.3-2002 | 光学和光学仪器望远镜设备词汇第3部分:望远镜视野的术语 Optics and optical instruments -- Vocabulary for telescopic systems -- Part 3: Terms for telescopic sights |
| 54 | ISO 14132.2-2002 | 光学和光学仪器望远镜设备词汇第2部分:双筒望远镜、单筒望远镜和定位观测望远镜的术语 Optics and optical instruments -- Vocabulary for telescopic systems -- Part 2: Terms for binoculars monoculars and spotting scopes |
| 55 | ISO 14132.1-2002 | 光学和光学仪器望远镜设备词汇第1部分:通用术语和ISO 14132中术语的字母索引 Optics and optical instruments - Vocabulary for telescopic systems - Part 1: General terms and alphabetical indexes of terms in ISO 14132 First edition |
| 56 | ISO 14132.4-2002 | 光学和光学仪器望远镜设备词汇第4部分:天文望远镜的术语 Optics and optical instruments - Vocabulary for telescopic systems - Part 4: Terms for astronomical telescopes First edition |
| 57 | ISO 14135.1-2003 | 光学和光学仪器 望远镜规范 第1部分：通用仪器 Optics and optical instruments -- Specifications for telescopic sights -- Part 1: General-purpose instruments |
| 58 | ISO 14135.2-2003 | 光学和光学仪器 望远镜规范 第2部分：高性能仪器 Optics and optical instruments -- Specifications for telescopic sights -- Part 2: High-performance instruments |
| 59 | ISO 14131-2005 | 农用喷雾器 悬臂稳定性 试验方法 Agricultural sprayers -- Boom steadiness -- Test methods |
| 60 | ISO 14137-2000 | 机床金属线放电加工机床的试验条件术语和准确度试验 Machine tools -- Test conditions for wire electrical-discharge machines (wire EDM) -- Terminology and testing of the accuracy |
| 61 | ISO 14139-2000 | 液体比重计的测定使用结构的明渠流量测量真空压力结构 Hydrometric determinations -- Flow measurements in open channels using structures -- Compound gauging structures |
| 62 | ISO 14143.1-1998 | 信息技术软件测量泛函尺寸测量第1部分:概念的定义 Information Technology - Software Measurement - Functional Size Measurement Part 1: Definition of Concepts First Edition |
| 63 | ISO 14145.1-1998 | 园珠笔及其笔芯第1部分:一般用途 Roller ball pens and refills -- Part 1: General use |
| 64 | ISO 14145.2-1998 | 园珠笔及其笔芯第2部分:公文写作用 Roller ball pens and refills -- Part 2: Documentary use (DOC) |
| 65 | ISO 14146-2000 | 辐射保护Χ辐射和γ辐射的个人剂量仪处理器的期间性评价的标准和性能规范 Radiation protection -- Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation |
| 66 | ISO 14152-2001 | 中子辐射防护屏蔽选择适用材料用的设计原则和考虑 Neutron radiation protection shielding -- Design principles and considerations for the choice of appropriate materials |
| 67 | ISO 14136-1995 | Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Specification Functional Model and Information Flows - Identification Supplementary Services First Edition; ETSI PRETS 300173: 1 |
| 68 | ISO 14143.2-2002 | Information Technology - Software Measurement - Functional Size Measurement - Part 2: Conformity Evaluation of Software Size Measurement Methods to ISO/IEC 14143-1:1998 First Edition |
| 69 | ISO 14156-2001 | 奶和奶制品脂类和脂类化合物的萃取法 Milk and milk products -- Extraction methods for lipids and liposoluble compounds |
| 70 | ISO 14159-2002 | 机械安全机械设计的卫生要求 Safety of machinery -- Hygiene requirements for the design of machinery |
| 71 | ISO 14160-1998 | 一次性医用设备混合动物源材料的消毒液体消毒液消毒的确认和常规管理 Sterilization of single-use medical devices incorporating materials of animal origin -- Validation and routine control of sterilization by liquid chemical sterilants |
| 72 | ISO 14161-2000 | 医疗保健产品的消毒生物指示器结果的选择、使用和解释的指南 Sterilization of health care products -- Biological indicators -- Guidance for the selection use and interpretation of results |
| 73 | ISO 14163-1998 | 声学消音器噪声控制指南 Acoustics -- Guidelines for noise control by silencers |
| 74 | ISO 14164-1999 | 稳定源排放管道中气流容积流量比率测定自动配置方法 Stationary source emissions -- Determination of the volume flowrate of gas streams in ducts -- Automated method |
| 75 | ISO 14155.1-2003 | 医疗器械人体临床调查 第1部分：一般要求 Clinical investigation of medical devices for human subjects -- Part 1: General requirements |
| 76 | ISO 14165.131-2000 | 信息技术光纤通道第131部分:交换光纤要求 Information Technology - Fibre Channel - Part 131: Switch Fabric Requirements (FC-SW) First Edition |
| 77 | ISO 14155.2-2003 | 人体用医疗器械的临床调查 第2部分：临床调查计划 Clinical investigation of medical devices for human subjects -- Part 2: Clinical investigation plans |
| 78 | ISO 14154-2005 | 土壤质量 某些选定氯酚的测定 电子俘获检测仪气相色谱法 Soil quality -- Determination of some selected chlorophenols -- Gas-chromatographic method with electron-capture detection |
| 79 | ISO 14165.141-2001 | 信息技术纤维通道第141部分:纤维一般要求(FC-FG) Information Technology - Fibre Channel - Part 141: Fabric Generic Requirements (FC-FG) First Edition |
| 80 | ISO 14169-1995 | 信息技术信息交换用90mm盒式软盘21兆字节格式化容量ISO型305 Information Technology - 90 mm Flexible Disk Cartridges for Information Interchange - 21 MBytes Formatted Capacity - ISO Type 305 First Edition |
| 81 | ISO 14175-1997 | 焊接用料电弧焊接和切割用保护气体 Welding consumables -- Shielding gases for arc welding and cutting |
| 82 | ISO 14171-2002 | 焊料非合金钢和细粒钢埋弧焊用焊丝和焊丝-焊剂混合物分类 Welding consumables -- Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels -- Classification |
| 83 | ISO 14165.211-1999 | Information Technology - Fibre Channel - Part 211: Mapping to HIPPI-FP (FC-FP) First Edition |
| 84 | ISO 14168-2003 | 硬质金属除外的金属粉末 铜基渗透粉末的试验方法 Metallic powders excluding hardmetals -- Method for testing copper-base infiltrating powders |
| 85 | ISO 14172-2003 | 焊接消耗品 镍和镍合金手工电弧焊接用涂敷焊条。分类 Welding consumables -- Covered electrodes for manual metal arc welding of nickel and nickel alloys -- Classification |
| 86 | ISO 14174-2004 | 焊接耗材 埋弧焊熔剂 分类 Welding consumables -- Fluxes for submerged arc welding -- Classification |
| 87 | ISO 14180-1998 | 固体矿物燃料煤层取样指南 Solid mineral fuels -- Guidance on the sampling of coal seams |
| 88 | ISO 14181-2000 | 动物饲料有机氯化物农药残留物的测定气相色谱法 Animal feeding stuffs -- Determination of residues of organochlorine pesticides -- Gas chromatographic method |
| 89 | ISO 14182-1999 | 动物饲料有机磷农药的残留物的测定气相色谱法 Animal feeding stuffs -- Determination of residues of organophosphorus pesticides -- Gas chromatographic method |
| 90 | ISO 14184.1-1998 | 织物甲醛的测定第1部分:自由和水解态甲醛(水抽提法) Textiles -- Determination of formaldehyde -- Part 1: Free and hydrolized formaldehyde (water extraction method) |
| 91 | ISO 14184.2-1998 | 织物甲醛测定第2部分:释放的甲醛(蒸气吸收法) Textiles -- Determination of formaldehyde -- Part 2: Released formaldehyde (vapour absorption method) |
| 92 | ISO 14190-1998 | 航空航天飞机机架用滚动轴承:滚珠滚柱轴承和球面滚柱轴承技术规范 Aerospace -- Airframe rolling bearings: ball and spherical roller bearings -- Technical specification |
| 93 | ISO 14191-1998 | 航空航天飞机机架用直径系列3和4的单列自位球面滚柱轴承米制系列 Aerospace -- Airframe spherical roller bearings single row self-aligning diameter series 3 and 4 -- Metric series |
| 94 | ISO 1419-1995 | 橡胶或塑料涂层织物加速老化试验 Rubber- or plastics-coated fabrics -- Accelerated-ageing tests |
| 95 | ISO 14192-1998 | 航空航天飞机机架用单列自位中等负荷防尘球面滚柱轴承米制系列 Aerospace -- Airframe spherical roller bearings single row self-aligning shielded intermediate duty -- Metric series |
| 96 | ISO 14193-1998 | 航空航天飞机机架用中等负荷扩展内圈单列自位密封球面滚柱轴承英尺系列 Aerospace -- Airframe spherical roller bearings single row self-aligning sealed extended inner ring intermediate duty -- Inch series |
| 97 | ISO 14194-1998 | 航空航天飞机机架用重负荷扩展内圈自位双列密封球面滚柱轴承英尺系列 Aerospace -- Airframe spherical roller bearings double row self-aligning sealed extended inner ring heavy duty -- Inch series |
| 98 | ISO 14195-1998 | 航空航天飞机机架用轻负荷有扭距管设计的自位双列密封球面滚柱轴承英尺系列 Aerospace -- Airframe spherical roller bearings double row self-aligning sealed torque tube design light duty -- Inch series |
| 99 | ISO 14196-1998 | 航空航天飞机机架用重负荷平内圈自位双列密封球面滚柱轴承英尺系列 Aerospace -- Airframe spherical roller bearings double row self-aligning sealed plain inner ring heavy duty -- Inch series |
| 100 | ISO 14197-1998 | 航空航天飞机机架用中等负荷自位单列密封球面滚柱轴承英尺系列 Aerospace -- Airframe spherical roller bearings single row self-aligning sealed intermediate duty -- Inch series |