| 序号 | 标准号 | 标准名称 |
 1 | ISO 13885.1-1998 | 涂料和清漆用胶粘剂凝胶渗透色谱法(GPC)第1部分:用四氢呋喃作洗脱溶剂 Binders for paints and varnishes -- Gel permeation chromatography (GPC) -- Part 1: Tetrahydrofuran (THF) as eluent |
| 2 | ISO 1388.5-1981 | 工业用乙醇试验方法第5部分:醛类含量的测定目测比色法 Ethanol for industrial use -- Methods of test -- Part 5: Determination of aldehydes content -- Visual colorimetric method |
| 3 | ISO 1388.6-1981 | 工业用乙醇试验方法第6部分:与水混溶性试验 Ethanol for industrial use -- Methods of test -- Part 6: Test for miscibility with water |
| 4 | ISO 1388.7-1981 | 工业用乙醇试验方法第7部分:甲醇含量(001-002%(v/v)的测甲醇含量)的测定光度法 Ethanol for industrial use -- Methods of test -- Part 7: Determination of methanol content (methanol contents between 001 and 020 % (V/V)) -- Photometric method |
| 5 | ISO 13886-1996 | Information Technology - Language-Independent Procedure Calling (LIPC) First Edition |
| 6 | ISO 13884-2003 | 动植物油脂 用红外分光计测定单个反式异构体 Animal and vegetable fats and oils -- Determination of isolated trans isomers by infrared spectrometry |
| 7 | ISO 13888.1-1997 | 信息技术安全性技术非拒绝第1部分:总则 Information Technology - Security Techniques - Non-Repudiation - Part 1: General First Edition |
| 8 | ISO 1388.8-1981 | 工业用乙醇试验方法第8部分:甲醇含量的测定(001-0150%(v/v)的甲醇含量)目测比色法 Ethanol for industrial use -- Methods of test -- Part 8: Determination of methanol content (methanol contents between 010 and 150 % (V/V)) -- Visual colorimetric method |
| 9 | ISO 13888.2-1998 | 信息技术安全性技术非拒绝第2部分:使用对称性技术的机械结构 Information Technology - Security Techniques - Non-Repudiation - Part 2: Mechanisms Using Symmetric Techniques First Edition |
| 10 | ISO 13888.3-1997 | 信息技术安全性技术非拒绝第3部分:使用不对称性技术的机械结构 Information Technology - Security Techniques - Non-Repudiation - Part 3: Mechanisms Using Asymmetric Techniques First Edition |
| 11 | ISO 1388.9-1981 | 工业用乙醇试验方法第9部分:酯含量的测定皂化后滴定法 Ethanol for industrial use -- Methods of test -- Part 9: Determination of esters content -- Titrimetric method after saponification |
| 12 | ISO 13894.1-2000 | 高压装饰性叠层板材复合成份第1部分:试验方法 High-pressure decorative laminates -- Composite elements -- Part 1: Test methods |
| 13 | ISO 13895-1996 | 胶粘剂塑料的安全制备用导则 Adhesives - Guidelines for the Surface Preparation of Plastics First Edition |
| 14 | ISO 13897-2003 | 齿科学 银汞合金膜盒 Dentistry -- Amalgam capsules |
| 15 | ISO 13887-2004 | 有改进可成型性较高强度的冷轧薄钢板 Cold-reduced steel sheet of higher yield strength with improved formability |
| 16 | ISO 13898.1-1997 | 钢和铁镍铜和钴含量的测定电感耦合等离子体原子发射光谱分析法第1部分:一般要求和试样溶解 Steel and iron -- Determination of nickel copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 1: General requirements and sample dissolution |
| 17 | ISO 13898.2-1997 | 钢和铁镍铜和钴含量的测定电感耦合等离子体原子发射光谱分析法第2部分:镍含量的测定 Steel and iron -- Determination of nickel copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 2: Determination of nickel content |
| 18 | ISO 13898.3-1997 | 钢和铁镍铜和钴含量的测定电感耦合等离子体原子发射光谱分析法第3部分:铜含量的测定 Steel and iron -- Determination of nickel copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 3: Determination of copper content |
| 19 | ISO 13898.4-1997 | 钢和铁镍铜和钴含量的测定电感耦合等离子体原子发射光谱分析法第4部分:钴含量的测定 Steel and iron -- Determination of nickel copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 4: Determination of cobalt content |
| 20 | ISO 13900-1997 | 钢硼含量测定蒸馏后姜黄素光谱测定法 Steel -- Determination of boron content -- Curcumin spectrophotometric method after distillation |
| 21 | ISO 13902-1997 | 钢和铁高硫含量的测定感应炉燃烧后的红外线吸收法 Steel and iron -- Determination of high sulfur content -- Infrared absorption method after combustion in an induction furnace |
| 22 | ISO 13909.1-2001 | 硬煤和焦炭机械取样第1部分:一般介绍 Hard coal and coke -- Mechanical sampling -- Part 1: General introduction |
| 23 | ISO 13904-2005 | 动物饲料 色氨酸含量的测定 Animal feeding stuffs -- Determination of tryptophan content |
| 24 | ISO 13899.2-2005 | Steel -- Determination of Mo Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 2: Determination of Nb content |
| 25 | ISO 13903-2005 | Animal feeding stuffs -- Determination of amino acids content |
| 26 | ISO 13909.2-2001 | 硬煤和焦炭机械取样第2部分:煤流动取样 Hard coal and coke -- Mechanical sampling -- Part 2: Coal -- Sampling from moving streams |
| 27 | ISO 13909.3-2001 | 硬煤和焦炭机械取样第2部分:煤静止批中取样 Hard coal and coke -- Mechanical sampling -- Part 3: Coal -- Sampling from stationary lots |
| 28 | ISO 13909.4-2001 | 硬煤和焦炭机械取样第4部分:煤试验样品的制备 Hard coal and coke -- Mechanical sampling -- Part 4: Coal -- Preparation of test samples |
| 29 | ISO 13909.5-2001 | 硬煤和焦炭机械取样第5部分:焦炭流动取样 Hard coal and coke -- Mechanical sampling -- Part 5: Coke -- Sampling from moving streams |
| 30 | ISO 13909.6-2001 | 硬煤和焦炭机械取样第6部分:焦炭试验样品的制备 Hard coal and coke -- Mechanical sampling -- Part 6: Coke -- Preparation of test samples |
| 31 | ISO 13909.7-2001 | 硬煤和焦炭机械取样第7部分:取样精度测定方法、样品制备方法及试验方法 Hard coal and coke -- Mechanical sampling -- Part 7: Methods for determining the precision of sampling sample preparation and testing |
| 32 | ISO 13909.8-2001 | 硬煤和焦炭机械取样第8部分:偏差试验方法 Hard coal and coke -- Mechanical sampling -- Part 8: Methods of testing for bias |
| 33 | ISO 13916-1996 | 焊接预热温度、层间温度和预加热的维持温度测量的导则 Welding -- Guidance on the measurement of preheating temperature interpass temperature and preheat maintenance temperature |
| 34 | ISO 13918-1998 | 焊接弧螺栓焊接用螺栓和水泥箍 Welding -- Studs and ceramic ferrules for arc stud welding |
| 35 | ISO 13910-2005 | 建筑木材 强度分级木材的特性值 抽样、全规格试验和评定 Structural timber -- Characteristic values of strength-graded timber -- Sampling full-size testing and evaluation |
| 36 | ISO 13919.1-1996 | 焊接电子和激光射线焊接接头缺陷的质量级别导则第1部分:钢 Welding -- Electron and laser-beam welded joints -- Guidance on quality levels for imperfections -- Part 1: Steel |
| 37 | ISO 13919.2-2001 | 焊接电子和激光束焊接接头缺陷的质量级别导则第1部分:铝及其可焊合金 Welding -- Electron and laser beam welded joints -- Guidance on quality levels for imperfections -- Part 2: Aluminium and its weldable alloys |
| 38 | ISO 13920-1996 | 焊接焊接结构的通用公差长度和角度尺寸形状和位置 Welding -- General tolerances for welded constructions -- Dimensions for lengths and angles -- Shape and position |
| 39 | ISO 13921-1996 | 航空内部偏颈十字形带螺纹或不带螺纹的、标准的、短的或中等长度MJ螺纹、金属材料涂覆或没有涂覆的、强度级别小于或等于1100MPa、100℃轧制沉头螺钉尺寸 Aerospace - Screws 100 Degrees Reduced Countersunk Head Internal Offset Cruciform Ribbed or Unribbed Drive Normal Shank Short or Medium Length MJ Threads Metallic Material Coated or Uncoated Strength Classes Less Than or Equal to 1 100 MPa - Dimen |
| 40 | ISO 1392-1977 | 结晶点的测定一般方法 Determination of crystallizing point -- General method |
| 41 | ISO 13923-1996 | 信息技术信息交换用381mm宽盒式磁带螺旋扫描记录用120m长带的DDS-2格式 Information Technology - 381 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DDS-2 Format Using 120 m Length Tape First Edition |
| 42 | ISO 13924-2000 | 塑料管和配件聚乙烯/金属过渡配件、聚乙烯攻丝三通管和聚乙烯支管管托的弯曲拉力循环试验 Plastics pipes and fittings -- Bending-tensile cycle test for PE/metal transition fittings PE tapping tees and PE branch saddles |
| 43 | ISO 13926.2-1999 | 针头系列第2部分:医用注射器针头用圆盘和柱基 Pen systems -- Part 2: Plungers and discs for pen-injectors for medical use |
| 44 | ISO 139-2005 | 纺织品调湿和试验用标准大气 Textiles -- Standard atmospheres for conditioning and testing |
| 45 | ISO 13926.1-2004 | 笔系统 第1部分：医用注射笔用玻璃套筒 Pen systems -- Part 1: Glass cylinders for pen-injectors for medical use |
| 46 | ISO 13927-2001 | 塑料用锥形辐射加热器和热电堆探测器进行简单热释放试验 Plastics -- Simple heat release test using a conical radiant heater and a thermopile detector |
| 47 | ISO 13929-2001 | 小型船舶操舵装置一般链接系统 Small craft -- Steering gear -- Geared link systems |
| 48 | ISO 13930-1998 | 铁矿石低温还原分解的动态试验 Iron ores -- Dynamic test for low-temperature reduction-disintegration |
| 49 | ISO 13934.1-1999 | 纺织材料织物拉伸特性第1部分:用条形方法对最大作用力和在最大作用力下延伸的测定 Textiles -- Tensile properties of fabrics -- Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| 50 | ISO 13934.2-1999 | 纺织材料织物拉伸特性第2部分:用夹钳方法对最大作用力的测定 Textiles -- Tensile properties of fabrics -- Part 2: Determination of maximum force using the grab method |
| 51 | ISO 13935.1-1999 | 纺织材料织物和成衣接缝拉伸特性用剥离方法对接缝裂开最大拉力的测定 Textiles -- Seam tensile properties of fabrics and made-up textile articles -- Part 1: Determination of maximum force to seam rupture using the strip method |
| 52 | ISO 13935.2-1999 | 纺织材料织物和成衣接缝拉伸特性用夹钳方法对接缝裂开最大拉力的测定 Textiles -- Seam tensile properties of fabrics and made-up textile articles -- Part 2: Determination of maximum force to seam rupture using the grab method |
| 53 | ISO 13936.1-2004 | 纺织品 机织物缝线耐滑动性能的测定 第1部分：固定缝开合法 Textiles -- Determination of the slippage resistance of yarns at a seam in woven fabrics -- Part 1: Fixed seam opening method |
| 54 | ISO 13936.2-2004 | 纺织品 机织物缝线耐滑动性能的测定 第2部分：固定载荷法 Textiles -- Determination of the slippage resistance of yarns at a seam in woven fabrics -- Part 2: Fixed load method |
| 55 | ISO 13936.3-2005 | 纺织品 机织物缝线耐滑动性能的测定 第3部分：针箍法 Textiles -- Determination of the slippage resistance of yarns at a seam in woven fabrics -- Part 3: Needle clamp method |
| 56 | ISO 13937.1-2000 | 纺织材料织物撕裂特性第1部分:用冲击摆方法测定撕裂力(埃尔门多夫) Textiles -- Tear properties of fabrics -- Part 1: Determination of tear force using ballistic pendulum method (Elmendorf |
| 57 | ISO 13937.2-2000 | 纺织材料织物撕裂特性第2部分:裤形试样撕裂力的测定(单撕裂法) Textiles -- Tear properties of fabrics -- Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) |
| 58 | ISO 13937.3-2000 | 纺织材料织物撕裂特性第3部分:翼形试样撕裂力的测定(单撕裂法) Textiles -- Tear properties of fabrics -- Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) |
| 59 | ISO 13937.4-2000 | 纺织材料织物撕裂特性第4部分:舌形试样撕裂力的测定(双撕裂法) Textiles -- Tear properties of fabrics -- Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) |
| 60 | ISO 13938.1-1999 | 织物纤维破碎特性第1部分:破碎强度和破碎膨胀测定的液压方法 Textiles -- Bursting properties of fabrics -- Part 1: Hydraulic method for determination of bursting strength and bursting distension |
| 61 | ISO 13938.2-1999 | 织物纤维破碎特性第1部分:破碎强度和破碎膨胀测定的气压方法 Textiles -- Bursting properties of fabrics -- Part 2: Pneumatic method for determination of bursting strength and bursting distension |
| 62 | ISO 13942-2000 | 粘合磨料极限偏差和跳动公差 Bonded abrasive products -- Limit deviations and run-out tolerances |
| 63 | ISO 13943-2000 | 防火安全词汇 Fire safety -- Vocabulary |
| 64 | ISO 13944-1996 | 润滑金属粉末混合物润滑物含量测定改良的索格利特(提取器)萃取法 Lubricated metal-powder mixes -- Determination of lubricant content -- Modified Soxhlet extraction method |
| 65 | ISO 13948.1-2000 | 柴油发动机燃料喷射管和燃料喷射器低压连接第1部分:螺纹连接 Diesel engines -- Fuel injection pumps and fuel injector low-pressure connections -- Part 1: Threaded connections |
| 66 | ISO 13948.2-2000 | 柴油发动机燃料喷射管和燃料喷射器低压连接件第2部分:无螺纹(推动)连接件 Diesel engines -- Fuel injection pumps and fuel injector low-pressure connections -- Part 2: Non-threaded (push-on) connections |
| 67 | ISO 13951-2001 | 塑料管道系统聚烯烃管道及管道配件对拉伸负载耐性的试验方法 Plastics piping systems -- Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading |
| 68 | ISO 13953-2001 | 聚乙烯管和配件从对焊接头测定抗拉强度和试样的断裂形式 Polyethylene (PE) pipes and fittings -- Determination of the tensile strength and failure mode of test pieces from a butt-fused joint |
| 69 | ISO 13954-1997 | 塑料管和配件额定外径大于或等于90mm的聚乙烯(PE)电熔组件的剥离内散试验 Plastics pipes and fittings -- Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm |
| 70 | ISO 13955-1997 | 塑料管和配件聚乙烯(PE)电熔组件的压碎内散试验 Plastics pipes and fittings -- Crushing decohesion test for polyethylene (PE) electrofusion assemblies |
| 71 | ISO 13957-1997 | 塑料管和配件聚乙烯(PE)敲击T抗冲击试验方法 Plastics pipes and fittings -- Polyethylene (PE) tapping tees -- Test method for impact resistance |
| 72 | ISO 1395 AMD 1-1982 | 第1次修改 Short pitch transmission precision bush chains and chain wheels; amendment 1 |
| 73 | ISO 13958-2002 | 血液透析和相关治疗的浓缩物 Concentrates for haemodialysis and related therapies |
| 74 | ISO 13959-2002 | 血液透析用水和有关疗法 Water for haemodialysis and related therapies |
| 75 | ISO 13963-1995 | 信息技术90mm光盘盒式存储器的数据交换容积:一个盒式存储器230兆位 Information Technology - Data Interchange on 90 mm Optical Disk Cartridges - Capacity: 230 Megabytes per Cartridge First Edition |
| 76 | ISO 13964-1998 | 空气质量环境空气中臭氧含量测定紫外线光度计法 Air quality -- Determination of ozone in ambient air -- Ultraviolet photometric method |
| 77 | ISO 13965-1998 | 肉和肉制品淀粉和葡萄糖的测定酶催化方法 Meat and meat products -- Determination of starch and glucose contents -- Enzymatic method |
| 78 | ISO 13966-1998 | 热塑管和配件标准环硬挺度 Thermoplastics pipes and fittings -- Nominal ring stiffnesses |
| 79 | ISO 13967-1998 | 热塑配件环硬挺度的测定 Thermoplastics fittings -- Determination of ring stiffness |
| 80 | ISO 13968-1997 | 塑料管道及导管系统热塑性塑料管环状物揉韧性的测定 Plastics piping and ducting systems -- Thermoplastics pipes -- Determination of ring flexibility |
| 81 | ISO 13961-2000 | Information Technology - Scalable Coherent Interface (SCI) IEEE Std 1596; First Edition |
| 82 | ISO 13962-1995 | Information Technology - Data Interchange on 127 mm 112-Track Magnetic Tape Cartridges - DLT 2 Format First Edition |
| 83 | ISO 13969-2003 | 乳和乳制品 对生物抑制剂试验统一说明的导则 Milk and milk products -- Guidelines for a standardized description of microbial inhibitor tests |
| 84 | ISO 13960-2003 | 心血管植入往返和人造器官 等离子滤器 Cardiovascular implants and artificial organs -- Plasmafilters |
| 85 | ISO 13984-1999 | 液压道路车辆燃油系统界面 Liquid hydrogen -- Land vehicle fuelling system interface |
| 86 | ISO 13990-1996 | 纺织机械及附件针织机用导纱器词汇 Textile machinery and accessories -- Yarn feeders for knitting machines -- Vocabulary |
| 87 | ISO 13992-1997 | 高山滑雪板装配安全要求和试验方法 Alpine touring ski-bindings -- Safety requirements and test methods |
| 88 | ISO 13993-2001 | 滑雪设备租赁商店实施规范租赁设施中完整和不完整高山滑雪装配靴的取样和检验 Rental ski shop practice -- Sampling and inspection of complete and incomplete alpine ski-binding-boot systems in rental applications |
| 89 | ISO 13994-1998 | 对液体化合物的防护服装防护服装材料在压力下防液体渗透的阻力测定 Clothing for protection against liquid chemicals -- Determination of the resistance of protective clothing materials to penetration by liquids under pressure |
| 90 | ISO 13995-2000 | 防护服机械特性材料抗动力撕扯和穿刺性的试验方法 Protective clothing -- Mechanical properties -- Test method for the determination of the resistance to puncture and dynamic tearing of materials |
| 91 | ISO 13976-2005 | 结构级超长厚热热扎钢板卷材 Hot-rolled steel sheet in coils of structural quality and heavy thickness |
| 92 | ISO 13982.2-2004 | 防固体化学粒子用防护服 第2部分：测定细颗粒气溶胶内部泄漏至服装内的试验方法 Protective clothing for use against solid particulates -- Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits |
| 93 | ISO 13982.1-2004 | 防固体化学粒子用防护服 第1部分：全身防空气中固体粒子的化学防护服的性能要求(5型防护服） Protective clothing for use against solid particulates -- Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) |
| 94 | ISO 13996-1999 | 防护服机械性能刺穿阻力的测定 Protective clothing -- Mechanical properties -- Determination of resistance to puncture |
| 95 | ISO 13997-1999 | 防护服机械特性抗尖锐物切割特性的测定 Protective clothing -- Mechanical properties -- Determination of resistance to cutting by sharp objects |
| 96 | ISO 13999.1-1999 | 防护服装防止刀切伤和割伤的手套和胳膊护套第1部分:链邮递手套和胳膊护套 Protective clothing -- Gloves and arm guards protecting against cuts and stabs by hand knives -- Part 1: Chain-mail gloves and arm guards |
| 97 | ISO 13999.3-2002 | 防护服防止被手持刀具割伤和刺伤用的手套和手臂保护物第3部分:编织物皮革和其它编织材料的冲击切割试验 Protective clothing -- Gloves and arm guards protecting against cuts and stabs by hand knives -- Part 3: Impact cut test for fabric leather and other materials |
| 98 | ISO 13998-2003 | 防护服 防小刀切割和穿刺的护裙、裤和上衣 Protective clothing -- Aprons trousers and vests protecting against cuts and stabs by hand knives |
| 99 | ISO 14000 CD-2001 | ISO 14000 SERIES - ENVIRONMENTAL COLLECTION SEE ALSO ISO 9000 AND 14000 CD |
| 100 | ISO 14000 COMPENDIUM-2001 | ISO STANDARDS COMPENDIUM - ISO 14000 - ENVIRONMENTAL MANAGEMENT Second Edition; INCLUDES ISO GUIDE 64 ISO 14001 14004 14010 14011 14012 DIS 14015 14020 14021 14024 TR 14025 14031 TR 14032 14040 14041 14042 14043 TR 14049 14050 AND TR 1 |