| 序号 | 标准号 | 标准名称 |
 1 | ISO 13012 Technical Corrigendum 1-1999 | 滚动轴承线性运动循环球套管型附件技术勘误1 Rolling bearings linear motion recirculating ball sleeve type - Accessories; Technical corrigendum 1 |
| 2 | ISO 13003-2003 | 纤维增强塑料 循环负荷条件下疲劳性能的测定 Fibre-reinforced plastics -- Determination of fatigue properties under cyclic loading conditions |
| 3 | ISO 13041.1-2004 | 数控车床和加工中心的试验条件 第1部分：工件夹持卧式主轴机械的几何试验 Test conditions for numerically controlled turning machines and turning centres -- Part 1: Geometric tests for machines with a horizontal workholding spindle |
| 4 | ISO .1-2004 | 瓷砖 灰浆和胶粘剂 第1部分：胶粘剂术语、定义和规范 Ceramic tiles -- Grouts and adhesives -- Part 1: Terms definitions and specifications for adhesives |
| 5 | ISO 13007.3-2004 | 瓷砖 灰浆和胶粘剂 第3部分：灰浆术语、定义和规范 Ceramic tiles -- Grouts and adhesives -- Part 3: Terms definitions and specifications for grouts |
| 6 | ISO 1304-1999 | 橡胶配方配合剂炭黑碘吸收值的测定滴定法 Rubber compounding ingredients -- Carbon black -- Determination of iodine adsorption number -- Titrimetric method |
| 7 | ISO 13050-1999 | 曲线齿状同步皮带传动系统 Curvilinear toothed synchronous belt drive systems |
| 8 | ISO 1306-1995 | 橡胶配方配合剂炭黑(粒状)浇铸密度的测定 Rubber compounding ingredients -- Carbon black (pelletized) -- Determination of pour density |
| 9 | ISO 13041.8-2004 | 数控车床和加工中心的试验条件 第8部分：热变形评估 Test conditions for numerically controlled turning machines and turning centres -- Part 8: Evaluation of thermal distortions |
| 10 | ISO 13041.7-2004 | 数控车床和加工中收的试验条件 第7部分：坐标平面仿形性能的评估 Test conditions for numerically controlled turning machines and turning centres -- Part 7: Evaluation of contouring performance in the coordinate planes |
| 11 | ISO 13041.4-2004 | 数控车床和加工中心的试验条件 第4部分：线性轴和旋转轴定位精度和可重复性 Test conditions for numerically controlled turning machines and turning centres -- Part 4: Accuracy and repeatability of positioning of linear and rotary axes |
| 12 | ISO 13091.1-2001 | 机械振动神经机能障碍评定的振动触感阈第1部分:指尖上的测量方法 Mechanical vibration -- Vibrotactile perception thresholds for the assessment of nerve dysfunction -- Part 1: Methods of measurement at the fingertips |
| 13 | ISO 13041.6-2005 | 数控车床和加工中心的试验条件 第6部分：加工试件的精度 Test conditions for numerically controlled turning machines and turning centres -- Part 6: Accuracy of a finished test piece |
| 14 | ISO 1307-1992 | 工业通用橡胶和塑料软管孔直径和公差长度公差 Rubber and plastics hoses for general-purpose industrial applications -- Bore diameters and tolerances and tolerances on length |
| 15 | ISO 13090.1-1998 | 机械振动和冲击试验及与人有关的实验安全方面指南第1部分:机械振动和反复冲击下的试验 Mechanical vibration and shock -- Guidance on safety aspects of tests and experiments with people -- Part 1: Exposure to whole-body mechanical vibration and repeated shock |
| 16 | ISO 13281.2-2000 | 工业自动化系统和集成制造自动化编程环境(MAPLE)第2部分:服务设施和接口 Industrial automation systems and integration -- Manufacturing Automation Programming Environment (MAPLE) -- Part 2: Services and interfaces |
| 17 | ISO 1328.2-1997 | 圆柱齿轮ISO 体系的准确度第2部分:有关放射要素偏差度和输出信息的相应偏差的容许值和定义 Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
| 18 | ISO 13291-1997 | 硫化锌浓度锌含量的测定溶解淬取法和EDTA滴定法 Zinc sulfide concentrates -- Determination of zinc content -- Solvent extraction and EDTA titrimetric method |
| 19 | ISO 13292-1997 | 铜铅和锌硫化物浓度抽样偏差的检查和试验方法 Copper lead and zinc sulfide concentrates -- Experimental methods for checking the bias of sampling |
| 20 | ISO 13294-1997 | 牙钻手柄牙钻气动机 Dental handpieces -- Dental air-motors |
| 21 | ISO 13295-1994 | 牙科旋切器心轴 Dental rotary instruments -- Mandrels |
| 22 | ISO 13297-2000 | 小型船舶电气系统交流电设备 Small craft -- Electrical systems -- Alternating current installations |
| 23 | ISO 13296 Technical Corrigendum 1-2000 | 柴油发动机高压燃料喷射管组件一般要求和尺寸技术勘误1 Diesel engines - High-pressure fuel injection pipe assemblies - General requirements and dimensions; Technical Corrigendum 1 |
| 24 | ISO 13284-2003 | 叉车 货叉伸长件和遥控货叉臂 技术性能和强度要求 Fork-lift trucks -- Fork-arm extensions and telescopic fork arms -- Technical characteristics and strength requirements |
| 25 | ISO 13296-2005 | 柴油发动机高压燃料喷射管组件一般要求和尺寸 Diesel engines -- High-pressure fuel injection pipe assemblies -- General requirements and dimensions |
| 26 | ISO 13310-1997 | 铁矿石用燃烧原子吸收光谱测定法测定锌含量 Iron ores -- Determination of zinc content -- Flame atomic absorption spectrometric method |
| 27 | ISO 13311-1997 | 铁矿石用燃烧原子吸收光谱测定法测定铅含量 Iron ores -- Determination of lead content -- Flame atomic absorption spectrometric method |
| 28 | ISO 13312-1997 | 铁矿石钾含量的测定火焰原子吸收分光光度法 Iron ores -- Determination of potassium content -- Flame atomic absorption spectrometric method |
| 29 | ISO 13313-1997 | 铁矿石钠含量的测定火焰原子吸收分光光度法 Iron ores -- Determination of sodium content -- Flame atomic absorption spectrometric method |
| 30 | ISO 13317.1-2001 | 用重力液体沉淀法测定粒度分布第1部分:通则和导则 Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 1: General principles and guidelines |
| 31 | ISO 13317.2-2001 | 用重力液体沉淀法测定粒度分布第2部分:固定移液管法 Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 2: Fixed pipette method |
| 32 | ISO 13317.3-2001 | 用重力液体沉淀法测定粒度分布第3部分:X射线重力技术 Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 3: X-ray gravitational technique |
| 33 | ISO 13301-2002 | 感官分析方法学用三点选配(3-AFC)法测定气味、香味和味觉探测阈值的通用指南 Sensory analysis -- Methodology -- General guidance for measuring odour flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure |
| 34 | ISO 13299-2003 | 感官分析 方法学 建立感官分析的一般导则 Sensory analysis -- Methodology -- General guidance for establishing a sensory profile |
| 35 | ISO 13302-2003 | 感观分析 对包装材料引起食品气味变化的评定方法 Sensory analysis -- Methods for assessing modifications to the flavour of foodstuffs due to packaging |
| 36 | ISO 13318.1-2001 | 用离心液体沉淀法测定粒度分布第1部分:通用原则和导则 Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 1: General principles and guidelines |
| 37 | ISO 13318.2-2001 | 用离心液体沉淀法测定粒度分布第2部分:光照离心法 Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 2: Photocentrifuge method |
| 38 | ISO 13319-2000 | 粒度分部的测定电感应区方法 Determination of particle size distributions -- Electrical sensing zone method |
| 39 | ISO 13320.1-1999 | 粒度分析激光衍射方法第1部分:一般规则 Particle size analysis -- Laser diffraction methods -- Part 1: General principles |
| 40 | ISO 13321-1996 | 粒度分析相关光量子光谱学 Particle size analysis -- Photon correlation spectroscopy |
| 41 | ISO 13323.1-2000 | 粒度分布的测定单粒子光干扰法第1部分:光干扰问题 Determination of particle size distribution -- Single-particle light interaction methods -- Part 1: Light interaction considerations |
| 42 | ISO 13326-1998 | 测量轮胎均匀度的试验方法 Test methods for measuring tyre uniformity |
| 43 | ISO 13325-2003 | 轮胎 轮胎对路面发出噪声测量的滑动法 Tyres -- Coast-by methods for measurement of tyre-to-road sound emission |
| 44 | ISO 13318.3-2004 | 通过离心液沉淀法对颗度分布的测定 第3部分：离心X射线法 Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 3: Centrifugal X-ray method |
| 45 | ISO 13322.1-2004 | Particle size analysis -- Image analysis methods -- Part 1: Static image analysis methods |
| 46 | ISO 13328-2000 | 摩托车轮胎轮胎滚动圆周的测量载重新轮胎 Motorcycle tyres -- Measurement of tyre rolling circumference -- Loaded new tyres |
| 47 | ISO 13331-1995 | 道路车辆摩托车燃料箱的开口和注油管蒸气回收系统 Road vehicles -- Filler pipes and openings of motor vehicle fuel tanks -- Vapour recovery system |
| 48 | ISO 13332-2000 | 往复式内燃机在发动机底部测量的发自高速和中速往复式内燃机的结构噪声的试验规范 Reciprocating internal combustion engines -- Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet |
| 49 | ISO 13333-1994 | 地面移动机械翻斗车身支架和操作舱翻转支架装置 Earth-moving machinery -- Dumper body support and operators cab tilt support devices |
| 50 | ISO 13337-1997 | 弹簧型直销轻型有槽的 Spring-type straight pins -- Slotted light duty |
| 51 | ISO 13338-1995 | 气体和气体混合物组织腐蚀性的测定 Determination of tissue corrosiveness of a gas or gas mixture |
| 52 | ISO 13340-2001 | 可运输气瓶不可再充填的气瓶用钢瓶阀门规范和原型试验 Transportable gas cylinders -- Cylinders valves for non-refillable cylinders -- Specification and prototype testing |
| 53 | ISO 13341-1997 | 可运输储气瓶储气瓶阀配件 Transportable gas cylinders -- Fitting of valves to gas cylinders |
| 54 | ISO 13341 Technical Corrigendum 1-1998 | 可运输储气瓶储气瓶阀的装配技术勘误1 Transportable gas cylinders - Fitting of valves to gas cylinders; Technical Corrigendum 1 |
| 55 | ISO 13342-1995 | 小型船舶舷外发动机静推力的测量 Small craft -- Static thrust measurement for outboard motors |
| 56 | ISO 13346.1-1995 | 信息技术信息交换用非时序录制只写和可再写介质的容量和文档结构第1部分:总则 Information Technology - Volume and File Structure of Write-Once and Rewritable Media Using Non-Sequential Recording for Information Interchange - Part 1: General First Edition |
| 57 | ISO 13346.2-1999 | Information Technology - Volume and File Structure of Write-Once and Rewritable Media Using Non-Sequential Recording for Information Interchange - Part 2: Volume and Boot Block Recognition First Edition |
| 58 | ISO 13346.3-1999 | Information Technology - Volume and File Structure of Write-Once and Rewritable Media Using Non-Sequential Recording for Information Interchange - Part 3: Volume Structure Second Edition |
| 59 | ISO 13346.4-1999 | Information Technology - Volume and File Structure of Write-Once and Rewritable Media Using Non-Sequential Recording for Information Interchange - Part 4: File Structure Second Edition |
| 60 | ISO 13346.5-1995 | Information Technology - Volume and File Structure of Write-Once and Rewritable Media Using Non-Sequential Recording for Information Interchange - Part 5: Record Structure First Edition |
| 61 | ISO 13344-2004 | 燃烧流出物致死毒性的测定 Estimation of the lethal toxic potency of fire effluents |
| 62 | ISO 13347.1-2004 | 工业风机 标准实验室条件下风机声功率级的测定 第1部分：综览 Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 1: General overview |
| 63 | ISO 13347.2-2004 | 工业风机 标准实验室条件下风机声功率级的测定 第2部分：混响室法。 Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 2: Reverberant room method |
| 64 | ISO 13347.3-2004 | 工业风机 标准实验室条件下风机声功率级的测定 第3部分：包络面法 Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 3: Enveloping surface methods |
| 65 | ISO 13349-1999 | 工业电扇类别的定义和词汇 Industrial fans -- Vocabulary and definitions of categories |
| 66 | ISO 13350-1999 | 工业电扇射流风扇的性能试验 Industrial fans -- Performance testing of jet fans |
| 67 | ISO 13351-1996 | 工业用通风机尺寸 Industrial fans -- Dimensions |
| 68 | ISO 13355-2001 | 包装完整满装的运输包装件和成组装运垂直随机振动试验 Packaging -- Complete filled transport packages and unit loads -- Vertical random vibration test |
| 69 | ISO 13356-1997 | 外科植入物钇-稳定处理的四方形锆基陶瓷材料 Implants for surgery -- Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) |
| 70 | ISO 13357.1-2002 | 石油产品润滑油可过滤性测定第2部分:水中过滤油的程序 Petroleum products -- Determination of the filterability of lubricating oils -- Part 1: Procedure for oils in the presence of water |
| 71 | ISO 13357.2-1998 | 石油产品润滑油可过滤性测定第2部分:干油程序 Petroleum products -- Determination of the filterability of lubricating oils -- Part 2: Procedure for dry oils |
| 72 | ISO 13358-1997 | 水质易释放硫化物的测定 Water quality -- Determination of easily released sulfide |
| 73 | ISO 13359-1998 | 封闭管道中导电液体流量的测量法兰电磁流量计全长 Measurement of conductive liquid flow in closed conduits -- Flanged electromagnetic flowmeters -- Overall length |
| 74 | ISO 13347,4-2004 | 工业风机 标准实验室条件下风机声功率级的测定 第3部分：包络面法 Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 4: Sound intensity method |
| 75 | ISO 13362-2000 | 柔性多孔聚合材料潮湿条件下压缩永久变形的测定 Flexible cellular polymeric materials -- Determination of compression set under humid conditions |
| 76 | ISO 13366.1-1997 | 乳体细胞的计数第1部分:显微法 Milk -- Enumeration of somatic cells -- Part 1: Microscopic method |
| 77 | ISO 13366.2-1997 | 乳体细胞的计数第2部分:电子粒子计数法 Milk -- Enumeration of somatic cells -- Part 2: Electronic particle counter method |
| 78 | ISO 13366.3-1997 | 乳体细胞的计数第3部分:荧光光电法 Milk -- Enumeration of somatic cells -- Part 3: Fluoro-opto-electronic method |
| 79 | ISO 13370-1998 | 建筑物的热性能经由地面的热传递计算方法 Thermal performance of buildings -- Heat transfer via the ground -- Calculation methods |
| 80 | ISO 13373.1-2002 | 条件监测和机械诊断振动条件监测第1部分:一般程序 Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 1: General procedures |
| 81 | ISO 13374.1-2003 | 机械状态监视和诊断 数据处理、交换和表示方法 第1部分：一般导则 Condition monitoring and diagnostics of machines -- Data processing communication and presentation -- Part 1: General guidelines |
| 82 | ISO 13379-2003 | 机械监视和诊断条件 对数据解释和诊断技术的一般导则 Condition monitoring and diagnostics of machines -- General guidelines on data interpretation and diagnostics techniques |
| 83 | ISO 13363-2004 | 海上工程潮气排放系统用橡胶和塑料管 Rubber and plastics hoses for marine-engine wet-exhaust systems -- Specification |
| 84 | ISO 13372-2004 | 机械的状态监视与诊断 词汇 Condition monitoring and diagnostics of machines -- Vocabulary |
| 85 | ISO 13380-2002 | 机器的条件监控和诊断对使用性能参数的一般导则 Condition monitoring and diagnostics of machines -- General guidelines on using performance parameters |
| 86 | ISO 13395-1996 | 水质用流量分析法和光谱检出法测定亚硝酸氮和硝酸氮及两者的总含量(CFA和FIA) Water quality -- Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection |
| 87 | ISO 13397.1-1995 | 牙周刮匙牙刮除器和牙钻孔器第1部分:一般要求 Periodontal curettes dental scalers and excavators -- Part 1: General requirements |
| 88 | ISO 13397.4-1997 | 牙周刮匙牙科刮除器和牙钻孔器第4部分:牙钻孔器盘形 Periodontal curettes dental scalers and excavators -- Part 4: Dental excavators -- Discoid-type |
| 89 | ISO 13397.3-1996 | 牙周刮匙牙科刮除器和牙钻孔器第3部分:牙科用刮除器H型 Periodontal curettes dental scalers and excavators -- Part 3: Dental scalers -- H-type |
| 90 | ISO 13398-1997 | 冷却的烃液液化天然气船上密闭输送程序 Refrigerated light hydrocarbon fluids -- Liquefied natural gas -- Procedure for custody transfer on board ship |
| 91 | ISO 1340-1976 | 圆柱齿轮向制造工业提供的买方要求的资料 Cylindrical gears -- Information to be given to the manufacturer by the purchaser in order to obtain the gear required |
| 92 | ISO 13397.2 Technical Corrigendum 1-1997 | 牙周刮匙、牙刮除器和牙钻孔器第2部分:牙周刮匙Gr型技术勘误1 Periodontal curettes dental scalers and excavators - Part 2: Periodontal curettes - Gr-type; Technical Corrigendum 1 |
| 93 | ISO 13381.1-2004 | 机械的状态监视与诊断 预报 第1部分：通则 Condition monitoring and diagnostics of machines -- Prognostics -- Part 1: General guidelines |
| 94 | ISO 13397.2-2005 | 牙周刮匙、牙刮除器和牙钻孔器第2部分:牙周刮匙Gr型 Dentistry -- Periodontal curettes dental scalers and excavators -- Part 2: Periodontal curettes of Gr-type |
| 95 | ISO 13402-1995 | 手术器械和牙科手动器械耐高压釜、耐腐蚀性、耐曝热等性能的测定 Surgical and dental hand instruments -- Determination of resistance against autoclaving corrosion and thermal exposure |
| 96 | ISO 13405.1-1996 | 修复和矫形外科学修复部件的分类和描述第1部分:修复部件的分类 Prosthetics and orthotics -- Classification and description of prosthetic components -- Part 1: Classification of prosthetic components |
| 97 | ISO 13405.2-1996 | 修复和矫形外科学修复部件的分类和描述第2部分:下降手足修复部件的描述 Prosthetics and orthotics -- Classification and description of prosthetic components -- Part 2: Description of lower-limb prosthetic components |
| 98 | ISO 13405.3-1996 | 修复和矫形外科学修复部件的分类和描述第3部分:上位手足修复部件的描述 Prosthetics and orthotics -- Classification and description of prosthetic components -- Part 3: Description of upper-limb prosthetic components |
| 99 | ISO 13406.1-1999 | 基于平坦面板的视觉显示的人类工效学要求第1部分:介绍 Ergonomic requirements for work with visual displays based on flat panels -- Part 1: Introduction |
| 100 | ISO 13406.2-2001 | 平板视觉显示工作的人类工效学要求第2部分:平板显示人类工效学要求 Ergonomic requirements for work with visual displays based on flat panels -- Part 2: Ergonomic requirements for flat panel displays |