| 序号 | 标准号 | 标准名称 |
 1 | ISO 12739-1997 | 硫化锌浓度锌含量的测定离子交换/EDTA滴定法 Zinc sulfide concentrates -- Determination of zinc content -- Ion-exchange/EDTA titrimetric method |
| 2 | ISO 12740-1998 | 硫化铅浓缩物银和金含量的测定使用铅析法和灰皿试金法的火焰试金和火焰原子吸收分光光度法 Lead sulfide concentrates -- Determination of silver and gold contents -- Fire assay and flame atomic absorption spectrometric method using scorification or cupellation |
| 3 | ISO 12742-2000 | 铜、铅和锌硫化物浓缩物可传送的湿度范围的测定流度台法 Copper lead and zinc sulfide concentrates -- Determination of transportable moisture limits -- Flow table method |
| 4 | ISO 12743-1998 | 铜铅和锌硫化浓缩物金属和湿度含量测定的抽样程序 Copper lead and zinc sulfide concentrates -- Sampling procedures for determination of metal and moisture content |
| 5 | ISO 12744-1997 | 铜铅和锌硫化浓缩物取样精确性检验用实验性方法 Copper lead and zinc sulfide concentrates -- Experimental methods for checking the precision of sampling |
| 6 | ISO 12745-1996 | 铜、铅和锌矿石及浓缩物质量测量技术的精度和偏差 Copper lead and zinc ores and concentrates -- Precision and bias of mass measurement techniques |
| 7 | ISO 1275-1995 | 传动和输送机用双节距的精密辊链和链轮 Double-pitch precision roller chains and sprockets for transmission and conveyors |
| 8 | ISO 12756-1998 | 绘图与书写仪器圆珠笔和签字笔词汇 Drawing and writing instruments -- Ball point pens and roller ball pens -- Vocabulary |
| 9 | ISO 12757.1-1998 | 园珠笔及其笔芯第1部分:一般应用 Ball point pens and refills -- Part 1: General use |
| 10 | ISO 12757.2-1998 | 圆珠笔和笔芯第2部分:文件用途 Ball point pens and refills -- Part 2: Documentary use (DOC) |
| 11 | ISO 12771-1997 | 塑料实验室器皿可处置血清移液管 Plastics laboratory ware -- Disposable serological pipettes |
| 12 | ISO 12772-1997 | 实验室玻璃器皿可处置微血球容量计毛细管 Laboratory glassware -- Disposable microhaematocrit capillary tubes |
| 13 | ISO 12775-1997 | 额定散装玻璃产品的复合材料及其试验方法导则 Guidelines on types of glass of normal bulk-production composition and their test methods |
| 14 | ISO 12777.1-1994 | 托盘连接件的检验方法第1部分:托盘用钉子其它榫钉型紧固件和U形钉的抗弯曲的测定 Methods of test for pallet joints -- Part 1: Determination of bending resistance of pallet nails other dowel-type fasteners and staples |
| 15 | ISO 12777.2-2000 | 托盘连接件的试验方法第2部分:托盘用钉子和U形钉的抗拉力的测定 Methods of test for pallet joints -- Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples |
| 16 | ISO 12789-2000 | 标准中子射线模拟工作地点中子场产生的特性和方法 Reference neutron radiations -- Characteristics and methods of production of simulated workplace neutron fields |
| 17 | ISO 12777.3-2002 | 托盘连接件的检验方法第3部分:托盘连接件的强度测定 Methods of test for pallet joints -- Part 3: Determination of strength of pallet joints |
| 18 | ISO 12790.1-2001 | 辐射防护放射生物测定的性能标准第1部分:一般原则 Radiation protection -- Performance criteria for radiobioassay -- Part 1: General principles |
| 19 | ISO 1279-1996 | 香精油利用氯化羟铵电势法对羰基值的测定 Essential oils -- Determination of carbonyl value -- Potentiometric methods using hydroxylammonium chloride |
| 20 | ISO 12794-2000 | 核能辐射防护四肢和眼用单独热致发光剂量计 Nuclear energy -- Radiation protection -- Individual thermoluminescence dosemeters for extremities and eyes |
| 21 | ISO 12803-1997 | 测定钚浓缩物用硝酸钚溶液样品表示方法 Representative sampling of plutonium nitrate solutions for determination of plutonium concentration |
| 22 | ISO 12807-1996 | 放射性材料的安全运输包装件的泄漏试验 Safe transport of radioactive materials -- Leakage testing on packages |
| 23 | ISO 12819-1999 | 电池动力表电池寿命的评估方法 Methods of evaluation of the battery life of a battery-powered watch |
| 24 | ISO 12819 Technical Corrigendum 1-1999 | 电池动力表电池寿命的评估方法技术勘误1 Method of evaluation of the battery life of a battery-powered watch; Technical Corrigendum 1 |
| 25 | ISO 128.1-2003 | 技术图纸图形表示的一般原则第一部分:前言和索引 Technical Drawings - General Principles of Presentation - Part 1: Introduction and Index First Edition |
| 26 | ISO 12800-2003 | 核燃料技术 用BET方法测量氧化铀粉末比表面积的导则 Nuclear fuel technology -- Guide to the measurement of the specific surface area of uranium oxide powders by the BET method |
| 27 | ISO 12795-2004 | 核燃料技术 二氧化铀粉和丸 用杂质修正重力法测定铀和氧化铀比例 Nuclear fuel technology -- Uranium dioxide powder and pellets -- Determination of uranium and oxygen/uranium ratio by gravimetric method with impurity correction |
| 28 | ISO 128.20-1996 | 技术制图画法的一般原则第20部分:图线的基本规定 Technical drawings -- General principles of presentation -- Part 20: Basic conventions for lines |
| 29 | ISO 128.21-1997 | 技术制图画法的一般原则第21部分:计算机辅助设计(CAD)系统用图线的表示 Technical drawings -- General principles of presentation -- Part 21: Preparation of lines by CAD systems |
| 30 | ISO 128.22-1999 | 技术制图展示的一般规则第22部分:标题线和参考线的惯例和应用 Technical drawings -- General principles of presentation -- Part 22: Basic conventions and applications for leader lines and reference lines |
| 31 | ISO 128.23-1999 | 技术制图绘制的一般原理第23部分:结构绘图线 Technical drawings -- General principles of presentation -- Part 23: Lines on construction drawings |
| 32 | ISO 128.24-1999 | 技术制图展示的一般规则第24部分:机械工程制图线 Technical Drawings - General Principles of Presentation - Part 24: Lines on Mechanical Engineering Drawings First Edition |
| 33 | ISO 128.25-1999 | 技术制图表示的一般原则第25部分:造船绘图线 Technical drawings -- General principles of presentation -- Part 25: Lines on shipbuilding drawings |
| 34 | ISO 128.30-2001 | 技术制图画法的一般原则第30部分:视图的基本惯例 Technical drawings -- General principles of presentation -- Part 30: Basic conventions for views |
| 35 | ISO 128.34-2001 | 技术制图画法的一般原则第34部分:机械工程图的视图 Technical drawings -- General principles of presentation -- Part 34: Views on mechanical engineering drawings |
| 36 | ISO 128.40-2001 | 技术制图画法的一般原则第40部分:切面和截面的一般换算 Technical drawings -- General principles of presentation -- Part 40: Basic conventions for cuts and sections |
| 37 | ISO 12844-1999 | 未加工的光学玻璃金刚石薄片的可磨性试验方法和分类 Raw optical glass -- Grindability with diamond pellets -- Test method and classification |
| 38 | ISO 128.44-2001 | 技术制图画法的一般原则第44部分:机械工程绘图部分 Technical drawings -- General principles of presentation -- Part 44: Sections on mechanical engineering drawings |
| 39 | ISO 128.50-2001 | 技术制图画法的一般原则第50部分:切图和分图的表示区域的基本惯例 Technical Drawings - General Principles of Presentation - Part 50: Basic Conventions for Representing Areas on Cuts and Sections First Edition; Cancels and Replaces ISO 128:1982 |
| 40 | ISO 12853-1997 | 光学和光学仪器显微镜用户信息提供 Optics and optical instruments -- Microscopes -- Information provided to the user |
| 41 | ISO 12858.1-1999 | 光学和光学设备大地测量设备的辅助装置第1部分:不便钢水平支柱 Optics and optical instruments -- Ancillary devices for geodetic instruments -- Part 1: Invar levelling staffs |
| 42 | ISO 12858.2-1999 | 光学和光学设备大地测量设备的辅助装置第2部分:三角架 Optics and optical instruments -- Ancillary devices for geodetic instruments -- Part 2: Tripods |
| 43 | ISO 12864-1997 | 眼科光学接触透镜散光的测定 Ophthalmic optics -- Contact lenses -- Determination of scattered light |
| 44 | ISO 12865-1998 | 眼科仪器检眼镜 Ophthalmic instruments -- Retinoscopes |
| 45 | ISO 12866-1999 | 眼科设备视野镜 Ophthalmic instruments -- Perimeters |
| 46 | ISO 12857.1-1997 | Optics and Optical Instruments - Geodetic Instruments - Field Procedures for Determining Accuracy - Part 1: Levels First Edition |
| 47 | ISO 12858.3-2005 | 光学和光学仪器 大地测量仪器辅助装置 第3部分：三脚台 Optics and optical instruments -- Ancillary devices for geodetic instruments -- Part 3: Tribrachs |
| 48 | ISO 12867-1998 | 眼科仪器试验框架 Ophthalmic instruments -- Trial frames |
| 49 | ISO 12884-2000 | 环境空气总(气相和粒子相)多环芳香烃的测定用气相色谱法或质谱分析法收集过滤器背上的吸附剂 Ambient air -- Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons -- Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses |
| 50 | ISO 12890-1999 | 水质对淡水鱼的胚胎和幼体毒性的测定 Water quality -- Determination of toxicity to embryos and larvae of freshwater fish -- Semi-static method |
| 51 | ISO 12891.1-1998 | 外科植入物的分析和修补第1部分:修补和处理 Retrieval and analysis of surgical implants -- Part 1: Retrieval and handling |
| 52 | ISO 12891.2-2000 | 外科植入物的分析和收回第2部分:收回的金属外科植入物的分析 Retrieval and analysis of surgical implants -- Part 2: Analysis of retrieved metallic surgical implants |
| 53 | ISO 12891.3-2000 | 外科植入物的分析和收回第3部分:收回的聚合的外科植入物的分析 Retrieval and analysis of surgical implants -- Part 3: Analysis of retrieved polymeric surgical implants |
| 54 | ISO 12891.4-2000 | 外科植入物的分析和收回第3部分:收回的陶瓷的外科植入物的分析 Retrieval and analysis of surgical implants -- Part 4: Analysis of retrieved ceramic surgical implants |
| 55 | ISO 12894-2001 | 热环境人类工效学暴露于极热和冷环境中的人的医学检验 Ergonomics of the thermal environment -- Medical supervision of individuals exposed to extreme hot or cold environments |
| 56 | ISO 12900-1997 | 硬度煤磨损性的测定 Hard coal - Determination of abrasiveness |
| 57 | ISO 12870-2004 | 眼镜科学眼镜镜一般要求和试验方法 Ophthalmic optics -- Spectacle frames -- Requirements and test methods |
| 58 | ISO 12917.1-2002 | 石油和液化石油产品卧式圆形油罐的校正第1部分:手工法 Petroleum and liquid petroleum products -- Calibration of horizontal cylindrical tanks -- Part 1: Manual methods |
| 59 | ISO 12922-1999 | 润滑油、工业油及有关产品(L级)H系列(液压系统)HFAE、HFAS、HFB、HFC、HFDR和HFDU类别规范 Lubricants industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for categories HFAE HFAS HFB HFC HFDR and HFDU |
| 60 | ISO 12925.1-1996 | 润滑剂、工业用油及有关(L类)产品(齿轮)C种第1部分:密封齿轮系统用润滑剂规范 Lubricants industrial oils and related products (class L) -- Family C (Gears) -- Part 1: Specifications for lubricants for enclosed gear systems |
| 61 | ISO 12937-2000 | 石油产品水含量测定库仑卡耳费歇尔滴定法 Petroleum products -- Determination of water -- Coulometric Karl Fischer titration method |
| 62 | ISO 12922 Technical Corrigendum 1-2001 | 润滑剂、工业用油和有关产品(L级)H系列(液压系统)HFAE、HFAS、HFB、HFC、HFDR和HFDU类规范技术勘误1 Lubricants industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE HFAS HFB HFC HFDR and HFDU; Technical Corrigendum 1 |
| 63 | ISO 12925.1 Technical Corrigendum 1-2002 | 润滑剂、工业用油和相关产品(L类)(齿轮)C种第1部分:密封齿轮系统用润滑剂技术勘误1 Lubricants industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems; Technical Corrigendum 1 |
| 64 | ISO 12917.2-2002 | 石油和液态石油产品卧式圆筒状油罐的标定第2部分:光电内测距法 Petroleum and liquid petroleum products -- Calibration of horizontal cylindrical tanks -- Part 2: Internal electro-optical distance-ranging method |
| 65 | ISO 129.1-2004 | 技术绘图尺寸和公差的表示第1部分:一般准则 Technical drawings -- Indication of dimensions and tolerances -- Part 1: General principles |
| 66 | ISO 12944.1-1998 | 涂料和清漆防护漆系统对钢结构的腐蚀防护第1部分:一般性介绍 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 1: General introduction |
| 67 | ISO 12944.2-1998 | 涂料和清漆防护漆系统对钢结构的腐蚀防护第2部分:环境分类 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 2: Classification of environments |
| 68 | ISO 12944.3-1998 | 涂料和清漆防护漆系统对钢结构的腐蚀防护第3部分:设计上的考虑 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 3: Design considerations |
| 69 | ISO 12944.4-1998 | 涂料和清漆防护漆系统对钢结构的腐蚀防护第4部分:表面类型和表面处理 Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 4: Types of Surface and Surface Preparation First Edition |
| 70 | ISO 12944.5-1998 | 涂料和清漆防护漆系统对钢结构的腐蚀防护第5部分:防护漆系统 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective paint systems |
| 71 | ISO 12944.6-1998 | 涂料和清漆防护漆系统对钢结构的腐蚀防护第6部分:实验室性能试验方法 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 6: Laboratory performance test methods |
| 72 | ISO 12944.7-1998 | 涂料和清漆防护漆系统对钢结构的腐蚀防护第7部分:涂漆工艺的实施和管理 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 7: Execution and supervision of paint work |
| 73 | ISO 12944.8-1998 | 涂料和清漆防护漆系统对钢结构的腐蚀防护第8部分:新工艺和维修规范的开发 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 8: Development of specifications for new work and maintenance |
| 74 | ISO 12945.1-2000 | 纺织品测定织物表面起毛和起球的倾向第1部分:起球箱法 Textiles -- Determination of fabric propensity to surface fuzzing and to pilling -- Part 1: Pilling box method |
| 75 | ISO 12945.2-2000 | 纺织材料测定织物表面起毛和起球的特性第2部分:改良的起毛起球试验法 Textiles -- Determination of fabric propensity to surface fuzzing and to pilling -- Part 2: Modified Martindale method |
| 76 | ISO 12947.1-1998 | 织物Martinadale法对纤维磨损抗性的测定第1部分:磨损试验装置 Textiles -- Determination of the abrasion resistance of fabrics by the Martindale method -- Part 1: Martindale abrasion testing apparatus |
| 77 | ISO 12947.2-1998 | 纺织品马丁代尔法测定织物耐磨性第2部分:样品破损的测定 Textiles -- Determination of the abrasion resistance of fabrics by the Martindale method -- Part 2: Determination of specimen breakdown |
| 78 | ISO 12947.1 Technical Corrigendum 1-2002 | 纺织品用马丁代尔(Martinadale)法对织物抗磨损性的测定第1部分:马丁代尔耐磨试验仪技术勘误1 Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus; Technical Corrigendum 1 |
| 79 | ISO 12947.3-1998 | 织物Martinadale法对纤维磨损抗性的测定第3部分:重量损失的测定 Textiles -- Determination of the abrasion resistance of fabrics by the Martindale method -- Part 3: Determination of mass loss |
| 80 | ISO 12947.2 Technical Corrigendum 1-2002 | 纺织品用马丁代尔(Martinadale)法对织物抗磨损性的测定第2部分:试样破损的测定技术勘误1 Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown; Technical Corrigendum 1 |
| 81 | ISO 12947.3 Technical Corrigendum 1-2002 | 纺织品用马丁代尔(Martinadale)法对织物抗磨损性的测定第3部分:质量损失的测定技术勘误1 Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss; Technical Corrigendum 1 |
| 82 | ISO 12947.4 Technical Corrigendum 1-2002 | 纺织品用马丁代尔(Martinadale)法对织物抗磨损性的测定第4部分:外观变化的评定技术勘误1 Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change; Technical Corrigendum 1 |
| 83 | ISO 12947.4-1998 | 织物Martinadale法对纤维磨损抗性的测定第4部分:表面变化的评估 Textiles -- Determination of the abrasion resistance of fabrics by the Martindale method -- Part 4: Assessment of appearance change |
| 84 | ISO 12951-1999 | 铺地织物用Lisson试验对质量损失的测定 Textile floor coverings -- Determination of mass loss using the Lisson test |
| 85 | ISO 12952.1-1998 | 纺织品床上用品的燃烧性能第1部分:由隐燃香烟引起的可燃性的一般试验方法 Textiles -- Burning behaviour of bedding items -- Part 1: General test methods for the ignitability by a smouldering cigarette |
| 86 | ISO 12952.2-1998 | 织物床上用品的燃烧性能第2部分:由隐燃香烟引起的可燃性的特殊试验方法 Textiles -- Burning behaviour of bedding items -- Part 2: Specific test methods for the ignitability by a smouldering cigarette |
| 87 | ISO 12952.3-1998 | 织物床上用品的燃烧性能第3部分:由一小团明火引起的可燃性的一般试验方法 Textiles -- Burning behaviour of bedding items -- Part 3: General test methods fot the ignitability by a small open flame |
| 88 | ISO 12952.4-1998 | 织物床上用品的燃烧性能第4部分:由一小团明火引起的可燃性的特殊试验方法 Textiles -- Burning behaviour of bedding items -- Part 4: Specific test methods for the ignitability by a small open flame |
| 89 | ISO 12956-1999 | 土工和土工相关产品特性化开口尺寸的测定 Geotextiles and geotextile-related products -- Determination of the characteristic opening size |
| 90 | ISO 12957.1-2005 | 土工合成材料 摩擦性能的测定 第1部分：直接剪切试验 Geosynthetics -- Determination of friction characteristics -- Part 1: Direct shear test |
| 91 | ISO 12957.2-2005 | 土工合成材料 摩擦性能的测定 第2部分：倾斜面试验 Geosynthetics -- Determination of friction characteristics -- Part 2: Inclined plane test |
| 92 | ISO 12958-1999 | 土工和土工相关产品水平水流容量的测定 Geotextiles and geotextile-related products -- Determination of water flow capacity in their plane |
| 93 | ISO 12965-2000 | 丁二烯橡胶用红外线光谱法测定微观结构 Butadiene rubber -- Determination of microstructure by infra-red spectrometry |
| 94 | ISO 12977-1999 | 铝制品用含碳物质电极用沥青挥发物含量的测定 Carbonaceous materials for use in the production of aluminium -- Pitch for electrodes -- Determination of volatile matter content |
| 95 | ISO 12979-1999 | 铝制品用含碳物质电极用沥青喹啉不溶物中C/H比率的测定 Carbonaceous materials for use in the production of aluminium -- Pitch for electrodes -- Determination of C/H ratio in the quinoline-insoluble fraction |
| 96 | ISO 12980-2000 | 用于铝生产的碳素物电极用未煅烧焦炭和煅烧焦炭用X射线荧光光谱法分析 Carbonaceous materials used in the production of aluminium -- Green coke and calcined coke for electrodes -- Analysis using an X-ray fluorescence method |
| 97 | ISO 12981.1-2000 | 铝生产中使用的含碳材料煅烧焦炭二氧化碳的活性测定第1部分:质量损失法 Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of the reactivity to carbon dioxide -- Part 1: Loss in mass method |
| 98 | ISO 12982.1-2000 | 生产铝用含碳材料煅烧焦炭对空气活性的测定第1部分:点火温度法 Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of the reactivity to air -- Part 1: Ignition temperature method |
| 99 | ISO 12984-2000 | 用于生产铝的碳素材料煅烧焦炭粒度分布的测定 Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of particle size distribution |
| 100 | ISO 12985.1-2000 | 用于生产铝的碳素材料焙烧阳极和阴极块第1部分:用尺寸法测定表观密度 Carbonaceous materials used in the production of aluminium -- Baked anodes and cathode blocks -- Part 1: Determination of apparent density using a dimensions method |