| 序号 | 标准号 | 标准名称 |
 1 | ISO 12543.3-1998 | 建筑物用玻璃夹层玻璃和夹层安全玻璃第3部分:夹层玻璃 Glass in building -- Laminated glass and laminated safety glass -- Part 3: Laminated glass |
| 2 | ISO 12543.4-1998 | 建筑物用玻璃夹层玻璃和夹层安全玻璃第4部分:耐久性试验方法 Glass in building -- Laminated glass and laminated safety glass -- Part 4: Test methods for durability |
| 3 | ISO 12543.5-1998 | 建筑物用玻璃夹层玻璃和夹层安全玻璃第5部分:尺寸和边缘整理 Glass in building -- Laminated glass and laminated safety glass -- Part 5: Dimensions and edge finishing |
| 4 | ISO 12500-6 | (Pending)Filters for Compressed Air - Methods of Test - Part 6: Viable Microbiological Contaminants First Edition |
| 5 | ISO 125-2003 | 天然橡胶胶乳浓缩物含碱量的测定 Natural rubber latex concentrate -- Determination of alkalinity |
| 6 | ISO 12510-2004 | 土方机械 操作和维护 维护性能导则 Earth-moving machinery -- Operation and maintenance -- Maintainability guidelines |
| 7 | ISO 12509-2004 | 土方机械 照明、信号和标志灯及反射镜装置 Earth-moving machinery -- Lighting signalling and marking lights and reflex-reflector devices |
| 8 | ISO 12543.2-2004 | 建筑物用玻璃夹层玻璃和夹层安全玻璃第2部分:夹层安全玻璃。 Glass in building -- Laminated glass and laminated safety glass -- Part 2: Laminated safety glass |
| 9 | ISO 12543.6-1998 | 建筑物用玻璃夹层玻璃和夹层安全玻璃第6部分:外观 Glass in building -- Laminated glass and laminated safety glass -- Part 6: Appearance |
| 10 | ISO 12567.1-2000 | 窗和门的热性能用隔热箱法测定热传递系数第1部分:成套窗和门 Thermal performance of windows and doors -- Determination of thermal transmittance by hot box method -- Part 1: Complete windows and doors |
| 11 | ISO 12569-2000 | 建筑物的热性能建筑物中空气变化的测定示踪气体稀释法 Thermal performance of buildings -- Determination of air change in buildings -- Tracer gas dilution method |
| 12 | ISO 12570-2000 | 建筑材料和产品热液性能用高温干燥法测定含水量 Hygrothermal performance of building materials and products -- Determination of moisture content by drying at elevated temperature |
| 13 | ISO 12571-2000 | 建筑材料和产品热液性能吸湿特性的测定 Hygrothermal performance of building materials and products -- Determination of hygroscopic sorption properties |
| 14 | ISO 12572-2001 | 建筑材料和产品的冷热性能水蒸气传输性能的测定 Hygrothermal performance of building materials and products -- Determination of water vapour transmission properties |
| 15 | ISO 12576.1-2001 | 热绝缘建筑物用绝缘材料和产品合格控制系统第1部分:工厂制产品 Thermal insulation -- Insulating materials and products for buildings -- Conformity control systems -- Part 1: Factory-made products |
| 16 | ISO 12606-1997 | 电影摄影电影和电视磁声频录音的保护和保存 Cinematography -- Care and preservation of magnetic audio recordings for motion pictures and television |
| 17 | ISO 12608-1996 | 电影摄影术再现电视显示电视节目评定用放映室和环境条件 Cinematography -- Room and surround conditions for evaluating television display from telecine reproduction |
| 18 | ISO 12611-2004 | 电影摄影35mm磁胶片主片的国际交换用拾音头音调规格及安装 Cinematography -- Audio head tones for use in international exchange of 35 mm analogue magnetic film masters -- Specifications and location |
| 19 | ISO 12612-1997 | 电影摄影接线柱生产材料的交换 Cinematography -- Interchange of post-production materials |
| 20 | ISO 12616-2002 | 与翻译有关的术语 Translation-oriented terminography |
| 21 | ISO 12620-1999 | 术语中的计算机应用数据目录 Computer applications in terminology -- Data categories |
| 22 | ISO 12625.6-2005 | Tissue paper and tissue products -- Part 6: Determination of grammage |
| 23 | ISO 126-2005 | 胶乳橡胶天然胶乳浓缩物干胶含量的测定 Natural rubber latex concentrate -- Determination of dry rubber content |
| 24 | ISO 12625.3-2005 | Tissue paper and tissue products -- Part 3: Determination of thickness bulking thickness and apparent bulk density |
| 25 | ISO 12625.4-2005 | Tissue paper and tissue products -- Part 4: Determination of tensile strength stretch at break and tensile energy absorption |
| 26 | ISO 12625.5-2005 | Tissue paper and tissue products -- Part 5: Determination of wet tensile strength |
| 27 | ISO 12615-2004 | 术语工作的文后参考文献和源文献标识符 Bibliographic references and source identifiers for terminology work |
| 28 | ISO 12625.1-2005 | Tissue paper and tissue products -- Part 1: General guidance on terms |
| 29 | ISO 12634-1996 | 制图技术用旋转粘度剂测定糊状油墨和载色剂的粘着性 Graphic technology -- Determination of tack of paste inks and vehicles by a rotary tackmeter |
| 30 | ISO 12635-1996 | 绘图技术胶印板尺寸 Graphic technology -- Plates for offset printing -- Dimensions |
| 31 | ISO 12636-1998 | 图形技术胶板印刷用橡皮 Graphic technology -- Blankets for offset printing |
| 32 | ISO 12637.5-2001 | 印刷技术印刷艺术的多语种术语第5部分:屏幕印刷术语 Graphic technology -- Multilingual terminology of printing arts -- Part 5: Screen printing terms |
| 33 | ISO 12641-1997 | 制图技术预处理数字数据交换输入扫描校验刻度的彩色目标 Graphic technology -- Prepress digital data exchange -- Colour targets for input scanner calibration |
| 34 | ISO 12639-2004 | 图形技术预压数字数据交换成像技术的标识符图像文件格式(TIFF/IT) Graphic technology -- Prepress digital data exchange -- Tag image file format for image technology (TIFF/IT) |
| 35 | ISO 12625.9-2005 | Tissue paper and tissue products -- Part 9: Determination of ball burst strength |
| 36 | ISO 12640.1-1997 | Graphic technology -- Prepress digital data exchange -- Part 1: CMYK standard colour image data (CMYK/SCID) |
| 37 | ISO 12640.2-2004 | 图形技术 预压数字数据交换 第2部分：XYZ/sRGB码标准颜色图形数据(XYZ/SCID) Graphic technology -- Prepress digital data exchange -- Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID) |
| 38 | ISO 1264-1980 | 塑料氯乙烯的均聚物和共聚物树脂水萃物的pH值测定 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of pH of aqueous extract |
| 39 | ISO 12642-1996 | 印刷技术预先的数字数据交换四色印刷的特性记述用输入数据 Graphic technology -- Prepress digital data exchange -- Input data for characterization of 4-colour process printing |
| 40 | ISO 12644-1996 | 制图技术用降落竿粘度计测定糊状油墨和展色剂的流动性 Graphic technology -- Determination of rheological properties of paste inks and vehicles by the falling rod viscometer |
| 41 | ISO 12645-1998 | 图形技术过程控制透射密度计不透明区校正用检定标准物质 Graphic technology -- Process control -- Certified reference material for opaque area calibration of transmission densitometers |
| 42 | ISO 12647.3-1998 | 制图技术中性颜色分离、试验和印刷品的生产的过程控制第3部分:新闻纸上的烫金排版胶版印刷法和活字印刷 Graphic technology -- Process control for the manufacture of half-tone colour separations proofs and production prints -- Part 3: Coldset offset lithography and letterpress on newsprint |
| 43 | ISO 12647.5-2001 | 印刷技术网目调分色片、样张及印刷成品的加工过程控制第5部分:丝网印刷 Graphic technology -- Process control for the manufacture of half-tone colour separations proof and production prints -- Part 5: Screen printing |
| 44 | ISO 12648-2003 | 印刷技术 印刷机系统的安全要求 Graphic technology -- Safety requirements for printing press systems |
| 45 | ISO 12646-2004 | 印刷技术 彩色打样显示 特性和观察条件 Graphic technology -- Displays for colour proofing -- Characteristics and viewing conditions |
| 46 | ISO 12647.1-2004 | 制图技术中间色调分离、校对和印刷品制作过程控制第1部分:媒介变数和测量法 Graphic technology -- Process control for the production of half-tone colour separations proof and production prints -- Part 1: Parameters and measurement methods |
| 47 | ISO 12647.2-2004 | 制图技术中性颜色分离、试验和印刷品的生产控制方法第2部分:平石版印刷法 raphic technology -- Process control for the production of half-tone colour separations proof and production prints -- Part 2: Offset lithographic processes |
| 48 | ISO 12650-1999 | 文件图形应用35mm缩微胶片上的消色差的缩微胶片 Document imaging applications -- Microfilming of achromatic maps on 35 mm microfilm |
| 49 | ISO 12651-1999 | 电子成像词汇 Electronic Imaging - Vocabulary First Edition |
| 50 | ISO 1265-1979 | 塑料聚氯乙烯树脂杂质和外来杂质数的测定 Plastics -- Polyvinyl chloride resins -- Determination of number of impurities and foreign particles |
| 51 | ISO 12653.1-2000 | 电子成像办公文件黑白扫描用测试标板第1部分:特性 Electronic imaging -- Test target for the black-and-white scanning of office documents -- Part 1: Characteristics |
| 52 | ISO 12653.2-2000 | 电子成像办公文件黑白扫描用测试标板第2部分:使用方法 Electronic imaging -- Test target for the black-and-white scanning of office documents -- Part 2: Method of use |
| 53 | ISO 12656-2001 | 缩微照相穿孔卡片上条形码的使用 Micrographics -- Use of bar codes on aperture cards |
| 54 | ISO 12667-1993 | 商用车辆和公交车T型交叉啮合万向轴法兰 Commercial vehicles and buses -- Cross-tooth propeller shaft flanges type T |
| 55 | ISO 12653.2 Technical Corrigendum 1-2002 | 电子成像办公文件黑白扫描用测试标板第2部分:使用方法技术勘误1 Electronic imaging - Test target for the black-and-white scanning of office documents - Part 2: Method of use; Technical Corrigendum 1 |
| 56 | ISO 12649-2004 | 印刷技术 装订和精整系统与设备的安全要求 Graphic technology -- Safety requirements for binding and finishing systems and equipment |
| 57 | ISO 12676-2000 | 耐熔制品耐一氧化碳的测定 Refractory products -- Determination of resistance to carbon monoxide |
| 58 | ISO 12678.1-1996 | 耐火制品耐火砖的尺寸测量与外部缺陷第1部分:绘图尺寸与一致性 Refractory products -- Measurement of dimensions and external defects of refractory bricks -- Part 1: Dimensions and conformity to drawings |
| 59 | ISO 12678.2-1996 | 耐火制品耐火砖的尺寸测量与外部缺陷第2部分:转角和边缘存在的缺陷及其它表面不完备性 Refractory products -- Measurement of dimensions and external defects of refractory bricks -- Part 2: Corner and edge defects and other surface imperfections |
| 60 | ISO 1268.1-2001 | 纤维增强塑料试验板的制备方法第1部分:通用条件 Fibre-reinforced plastics -- Methods of producing test plates -- Part 1: General conditions |
| 61 | ISO 1268.2-2001 | 纤维增强塑料试验用板材的生产方法第2部分:接触模压法和喷射成形法 Fibre-reinforced plastics -- Methods of producing test plates -- Part 2: Contact and spray-up moulding |
| 62 | ISO 1268-1974 | 塑料试验用强化的树脂粘合和低压层压的板材或板条的玻璃纤维制备 Plastics; Preparation of glass fibre reinforced resin bonded low-pressure laminated plates or panels for test purposes |
| 63 | ISO 12677-2003 | 耐火制品的XRF化学分析 熔铸珠法 Chemical analysis of refractory products by XRF -- Fused cast bead method |
| 64 | ISO 1268.10-2005 | Fibre-reinforced plastics -- Methods of producing test plates -- Part 10: Injection moulding of BMC and other long-fibre moulding compounds -- General principles and moulding of multipurpose test specimens |
| 65 | ISO 1268.11-2005 | 塑料试验用强化的树脂粘合和低压层压的板材或板条的玻璃纤维制备 Fibre-reinforced plastics -- Methods of producing test plates -- Part 11: Injection moulding of BMC and other long-fibre moulding compounds -- Small plates |
| 66 | ISO 12680.1-2005 | Methods of test for refractory products -- Part 1: Determination of dynamic Youngs modulus (MOE) by impulse excitation of vibration |
| 67 | ISO 1268.3-2000 | 纤维增强塑料试验板的生产方法第3部分:湿压缩模塑法 Fibre-reinforced plastics -- Methods of producing test plates -- Part 3: Wet compression moulding |
| 68 | ISO 1268.5-2001 | 纤维增强塑料试验用板材的生产方法第5部分:长纤维卷绕法 Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 5: Filament Winding First Edition; Cancels and Replaces ISO 9291:1996 |
| 69 | ISO 12686-1999 | 金属和其他无机覆层镍、自催化镍或铬镀敷或精整加工前用金属物质的自动控制喷丸处理 Metallic and other inorganic coatings -- Automated controlled shot-peening of metallic articles prior to nickel autocatalytic nickel or chromium plating or as a final finish |
| 70 | ISO 1268.6-2002 | 纤维增强塑料试验用板材的生产方法第6部分:Pultrusion 铸造品 Fibre-reinforced plastics -- Methods of producing test plates -- Part 6: Pultrusion moulding |
| 71 | ISO 12687-1996 | 金属覆层孔隙率试验湿硫(硫华)试验 Metallic coatings -- Porosity tests -- Humid sulfur (flowers of sulfur) test |
| 72 | ISO 1268.7-2001 | 纤维增强塑料试验用板材的生产方法第7部分:树脂压铸法 Fibre-reinforced plastics -- Methods of producing test plates -- Part 7: Resin transfer moulding |
| 73 | ISO 1268.9-2003 | 纤维增强塑料试验板的制备方法第9部分:GMT\STC的压缩模制 Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 9: Moulding of GMT/STC First Edition |
| 74 | ISO 1268.8-2004 | 纤维增强塑料试验板的制备方法第8部分:SMC和BMC的压缩模制 Fibre-reinforced plastics -- Methods of producing test plates -- Part 8: Compression moulding of SMC and BMC |
| 75 | ISO 1268.4-2005 | 玻璃增强塑料膜袋模塑单向增强板的制备 Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs |
| 76 | ISO 12683-2004 | 机械锌电镀层 规范和试验方法 Mechanically deposited coatings of zinc -- Specification and test methods |
| 77 | ISO 1269-1980 | 塑料氯乙烯的均聚物和共聚物树脂挥发性物质(包括水)的测定 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of volatile matter (including water) |
| 78 | ISO 12706-2000 | 无损检验术语用于渗透试验的术语 Non-destructive testing -- Terminology - Terms used in penetrant testing |
| 79 | ISO 1271-1983 | 香精油羰基值的测定 Essential oils -- Determination of carbonyl value -- Free hydroxylamine method |
| 80 | ISO 12713-1998 | 无损检验声音传播检查传感器的第一次校正 Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers |
| 81 | ISO 12714-1999 | 非损试验声音发散的检验声音发散敏感器的二级校正 Non-destructive testing -- Acoustic emission inspection -- Secondary calibration of acoustic emission sensors |
| 82 | ISO 12715-1999 | 超声非损试验接触搜索超声束截面特性的试验过程和参考信息组 Ultrasonic non-destructive testing -- Reference blocks and test procedures for the characterization of contact search unit beam profiles |
| 83 | ISO 12716-2001 | 无损检验声音发散检验词汇 Non-Destructive Testing - Acoustic Emission Inspection - Vocabulary First Edition |
| 84 | ISO 12721-2000 | 无损试验热中子放射性试验射线束L/D比率的测定 Non-destructive testing -- Thermal neutron radiographic testing -- Determination of beam L/D ratio |
| 85 | ISO 12710-2002 | 无损检验超声检测评估超声试验仪器的电子特性 Non-destructive testing -- Ultrasonic inspection -- Evaluating electronic characteristics of ultrasonic test instruments |
| 86 | ISO 127-2005 | 橡胶天然胶乳浓缩物氢氧化钾值的测定 Rubber natural latex concentrate -- Determination of KOH number |
| 87 | ISO 1272-2000 | 香精油酚类含量的测定 Essential oils -- Determination of content of phenols |
| 88 | ISO 12725-1997 | 镍和镍合金铸件 Nickel and nickel alloy castings |
| 89 | ISO 12737-1996 | 金属材料平面变形断裂韧性的测定 Metallic materials -- Determination of plane-strain fracture toughness |
| 90 | ISO 12739-1997 | 硫化锌浓度锌含量的测定离子交换/EDTA滴定法 Zinc sulfide concentrates -- Determination of zinc content -- Ion-exchange/EDTA titrimetric method |
| 91 | ISO 12740-1998 | 硫化铅浓缩物银和金含量的测定使用铅析法和灰皿试金法的火焰试金和火焰原子吸收分光光度法 Lead sulfide concentrates -- Determination of silver and gold contents -- Fire assay and flame atomic absorption spectrometric method using scorification or cupellation |
| 92 | ISO 12742-2000 | 铜、铅和锌硫化物浓缩物可传送的湿度范围的测定流度台法 Copper lead and zinc sulfide concentrates -- Determination of transportable moisture limits -- Flow table method |
| 93 | ISO 12743-1998 | 铜铅和锌硫化浓缩物金属和湿度含量测定的抽样程序 Copper lead and zinc sulfide concentrates -- Sampling procedures for determination of metal and moisture content |
| 94 | ISO 12744-1997 | 铜铅和锌硫化浓缩物取样精确性检验用实验性方法 Copper lead and zinc sulfide concentrates -- Experimental methods for checking the precision of sampling |
| 95 | ISO 12745-1996 | 铜、铅和锌矿石及浓缩物质量测量技术的精度和偏差 Copper lead and zinc ores and concentrates -- Precision and bias of mass measurement techniques |
| 96 | ISO 1275-1995 | 传动和输送机用双节距的精密辊链和链轮 Double-pitch precision roller chains and sprockets for transmission and conveyors |
| 97 | ISO 12756-1998 | 绘图与书写仪器圆珠笔和签字笔词汇 Drawing and writing instruments -- Ball point pens and roller ball pens -- Vocabulary |
| 98 | ISO 12757.1-1998 | 园珠笔及其笔芯第1部分:一般应用 Ball point pens and refills -- Part 1: General use |
| 99 | ISO 12757.2-1998 | 圆珠笔和笔芯第2部分:文件用途 Ball point pens and refills -- Part 2: Documentary use (DOC) |
| 100 | ISO 12771-1997 | 塑料实验室器皿可处置血清移液管 Plastics laboratory ware -- Disposable serological pipettes |