| 序号 | 标准号 | 标准名称 |
 1 | ISO 11568.5-1998 | 银行业务键控管理(零售)第5部分:使用公共键控密码的键盘寿命周期 Banking -- Key management (retail) -- Part 5: Key life cycle for public key cryptosystems |
| 2 | ISO 11568.6-1998 | 银行业务键控管理(零售)第6部分:键控管理计划 Banking - Key management (retail) - Part 6: Key management schemes |
| 3 | ISO 11570-1992 | 信息技术系统间电信和信息交换开放系统互连传输协议识别机制 Information Technology - Telecommunications and Information Exchange Between Systems - Open Systems Interconnection - Transport Protocol Identification Mechanism First Edition; AS/NZS 4245: 1994 |
| 4 | ISO 11571-1998 | 信息技术系统间电信和信息交换专业集成服务网寻址 Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Networks - Addressing Second Edition |
| 5 | ISO 11569-1993 | Information Technology - Telecommunications and Information Exchange Between Systems - 26-Pole Interface Connector Mateability Dimensions and Contact Number Assignments First Edition; AS/NZS 4244: 1994 |
| 6 | ISO 11568.1-2005 | 银行业务键控管理(零售)第1部分:键控管理的介绍 Banking -- Key management (retail) -- Part 1: Principles |
| 7 | ISO 11572-2000 | 信息技术系统间远程通信和信息交换专用综合业务网电路方式承载服务交换间信令规程和协议 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Circuit Mode Bearer Services - Inter-Exchange Signalling Procedures and Protocol Third Edition |
| 8 | ISO 11574-2000 | 信息技术电信和系统间信息交换 私人综合业务网电路模型64 kbit/s 承载业务业务描述、功能容量和信息流 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Circuit-Mode 64 kbit/s Bearer Services - Service Description Functional Capabilities and Information Flows Second Edition |
| 9 | ISO 11577-1995 | 信息技术开式系统互连网络层安全协议 Information Technology - Open Systems Interconnection - Network Layer Security Protocol First Edition |
| 10 | ISO 11578-1996 | 信息技术开放系统互连远程方法呼叫(PRC) Information Technology - Open Systems Interconnection - Remote Procedure Call (RPC) First Edition |
| 11 | ISO 11579.1-1994 | 信息技术系统间电信和信息交换专业集成服务网第1部分:PISN交换用参考配置 Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Part 1: Reference Configuration for PISN Exchanges (PINX) First Edition; (ETSI ETS 300 475-1: 1995) (Corrigendum 1-1996) |
| 12 | ISO 11573-1994 | Information Technology - Telecommunications and Information Exchange Between Systems - Synchronization Methods and Technical Requirements for Private Integrated Services Networks First Edition; AS/NZS 4138: 1995 |
| 13 | ISO 11575-1995 | Information Technology - Telecommunications and Information Exchange Between Systems - Protocol Mappings for the OSI Data Link Service First Edition |
| 14 | ISO 11576-1994 | Information Technology - Procedure for the Registration of Algorithms for the Lossless Compression of Data First Edition |
| 15 | ISO 11579.2-1999 | Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Part 2: Reference Configuration for HS-PISN Exchanges (HS-PINX) First Edition |
| 16 | ISO 11579.3-1999 | Information Technology - Private Integrated Services Network - Part 3: Reference Configuration for PINX Extension Lines First Edition |
| 17 | ISO 1158-1998 | 塑料氯乙烯均聚物和共聚物氯含量的测定 Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content |
| 18 | ISO 11584-1996 | 信息技术系统间电信和信息交换专业集成服务网电路式多速率承载服务服务说明、功能特性和信息流 Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Circuit-Mode Multi-Rate Bearer Services - Service Description Functional Capabilities and Information Flows First Edition |
| 19 | ISO 11581.1-2000 | Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 1: Icons - General First Edition |
| 20 | ISO 11581.2-2000 | Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 2: Object Icons Fisrt Edition |
| 21 | ISO 11581.3-2000 | Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 3: Pointer First Edition |
| 22 | ISO 11581.6-1999 | Information Technology - User System Interfaces and Symbols - Icon Symbols and Functions - Part 6: Action Icons First Edition |
| 23 | ISO 11586.1-1996 | Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Overview Models and Notation First Edition |
| 24 | ISO 11586.2-1996 | Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Security Exchange Service Element (SESE) Service Definition First Edition |
| 25 | ISO 11586.3-1996 | Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Security Exchange Service Element (SESE) Protocol Specification First Edition |
| 26 | ISO 11581.5-2004 | Information technology User system interfaces and symbols Icon symbols and functions Part 5: Tool icons First Edition |
| 27 | ISO 11587-1996 | 信息技术开放系统互连带事物处理过程的系统管理的使用背景 Information Technology - Open Systems Interconnection - Application Context for Systems Management with Transaction Processing First Edition |
| 28 | ISO 11591-2000 | 发动机驱动的小型船舶驾驶位置的视野 Small craft engine-driven -- Field of vision from helm position |
| 29 | ISO 11592-2001 | 小于8米长外壳的小艇最大推动力测定 Small craft less than 8 m length of hull -- Determination of maximum propulsion power rating |
| 30 | ISO 11593-1996 | 工业操作机器人自动终端操纵交换系统特性描述的词汇和说明 Manipulating industrial robots -- Automatic end effector exchange systems -- Vocabulary and presentation of characteristics |
| 31 | ISO 11586.4-1996 | Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Protecting Transfer Syntax Specification First Edition |
| 32 | ISO 11586.5-1997 | Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Security Exchange Service Element (SESE) Protocol Implementation Conformance Statement (PICS) Proforma First Edition |
| 33 | ISO 11586.6-1997 | Information Technology - Open Systems Interconnection - Generic Upper Layers Security: Protecting Transfer Syntax Protocol Implementation Conformance Statement (PICS) Proforma First Edition |
| 34 | ISO 11588.1-1996 | Information Technology - Message Handling Systems (MHS) Management - Part 1: Model and Architecture First Edition |
| 35 | ISO 11588.3-1997 | Information Technology - Message Handling Systems (MHS) Management: Logging Information First Edition |
| 36 | ISO 11588.8-1997 | Information Technology - Message Handling Systems (MHS) Management: Message Transfer Agent Management First Edition |
| 37 | ISO 11599-1997 | 含有包埋放射废物的液压粘合剂的气体泄漏和气体孔隙度的测定 Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste |
| 38 | ISO 11601-1999 | 移动式灭火器性能和结构 Wheeled fire extinguishers -- Performance and construction |
| 39 | ISO 11602.1-2000 | 灭火便携式和轮式灭火器第1部分:选择和安装 Fire protection -- Portable and wheeled fire extinguishers -- Part 1: Selection and installation |
| 40 | ISO 11602.2-2000 | 灭火便携式和轮式灭火器第2部分:检查和维修 Fire protection -- Portable and wheeled fire extinguishers -- Part 2: Inspection and maintenance |
| 41 | ISO 11605-1995 | 纸和纸板变积式流量计的校验 Paper and board -- Calibration of variable-area flowmeters |
| 42 | ISO 11606-2000 | 船舶和航海技术航海用电磁罗盘 Ships and marine technology - Marine electromagnetic compasses |
| 43 | ISO 11608.1-2000 | 医用笔式注射器第1部分:笔式注射器要求和试验方法 Pen-injectors for medical use -- Part 1: Pen-injectors -- Requirements and test methods |
| 44 | ISO 11600-2002 | 房屋建筑连接件密封胶的分类和要求 Building construction -- Jointing products -- Classification and requirements for sealants |
| 45 | ISO 11607-2003 | 终端无菌医学设备的包装 Packaging for terminally sterilized medical devices |
| 46 | ISO 11608.2-2000 | 医用笔式注射器第2部分:针头要求和试验方法 Pen-injectors for medical use -- Part 2: Needles -- Requirements and test methods |
| 47 | ISO 11608.3-2000 | 医用笔式注射器第3部分:成品容器要求和试验方法 Pen-injectors for medical use -- Part 3: Finished cartridges -- Requirements and test methods |
| 48 | ISO 11609-1995 | 牙科学牙膏的要求试验方法和标志 Dentistry -- Toothpastes -- Requirements test methods and marking |
| 49 | ISO 1161-1984 | 货运集装箱系列1角配件规范 Series 1 freight containers -- Corner fittings -- Specification |
| 50 | ISO 11612-1998 | 耐热和防火服装高温防护服装的试验方法和性能要求 Clothing for protection against heat and flame -- Test methods and performance requirements for heat-protective clothing |
| 51 | ISO 11613-1999 | 消防员防护服装实验室试验方法和性能要求 Protective clothing for firefighters -- Laboratory test methods and performance requirements |
| 52 | ISO 11614-1999 | 往复式内燃压燃式发动机不透明度测量仪器和废气吸光系数测定仪器 Reciprocating internal combustion compression-ignition engines -- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas |
| 53 | ISO 11620-1998 | 信息和文献程序库性能指示器 Information and documentation -- Library performance indicators |
| 54 | ISO 1161 Technical Corrigendum 1-1990 | 货运集装箱系列1角配件规范技术勘误表1 Series 1 freight containers; corner fittings; specification; technical corrigendum 1 |
| 55 | ISO 11621-1997 | 储气瓶供气变换程序 Gas cylinders -- Procedures for change of gas service |
| 56 | ISO 11623-2002 | 可运输储气瓶复合储气瓶的定期检测和测试 Transportable gas cylinders -- Periodic inspection and testing of composite gas cylinders |
| 57 | ISO 11625-1998 | 储气瓶安全搬运 Gas cylinders -- Safe handling |
| 58 | ISO 11630-1997 | 起重机轮位对准测量 Cranes -- Measurement of wheel alignment |
| 59 | ISO 1163.1-1995 | 塑料未增塑聚氯乙烯模制和挤制材料第1部分:名称与符号系统及规范 Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 1: Designation system and basis for specifications |
| 60 | ISO 11631-1998 | 流体流量测量流量计性能的表示方法 Measurement of fluid flow -- Methods of specifying flowmeter performance |
| 61 | ISO 1163.2-1995 | 塑料未增塑聚氯乙烯(PVC-U)模塑和挤制材料第2部分:试样制备和性能测定 Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties |
| 62 | ISO 11632-1998 | 固定源排放物二氧化硫质量浓厚的测定离子色谱法 Stationary source emissions -- Determination of mass concentration of sulfur dioxide -- Ion chromatography method |
| 63 | ISO 11634-1996 | 挡雪板-鞋靴有滑雪板装配的接口 Snowboard-boots -- Interface with ski-binding |
| 64 | ISO 11629-2004 | 起重机 起重机及其零件质量的测量 Cranes -- Measurement of the mass of a crane and its components |
| 65 | ISO 11640-1993 | 皮革的色牢度试验耐周期性往复磨擦色牢度 Leather -- Tests for colour fastness -- Colour fastness to cycles of to-and-fro rubbing |
| 66 | ISO 11641-1993 | 皮革色牢度试验耐汗渍的色牢度 Leather -- Tests for colour fastness -- Colour fastness to perspiration |
| 67 | ISO 11642-1993 | 皮革的色牢度试验耐水洗的色牢度 Leather -- Tests for colour fastness -- Colour fastness to water |
| 68 | ISO 11643-1993 | 皮革的色牢度试验小样品耐干洗液的色牢度 Leather -- Tests for colour fastness -- Colour fastness of small samples to dry-cleaning solutions |
| 69 | ISO 11644-1993 | 皮革涂层的附着试验 Leather -- Test for adhesion of finish |
| 70 | ISO 11646-1993 | 皮革面积的测量 Leather -- Measurement of area |
| 71 | ISO 11648.2-2001 | 从散装物料中抽样的统计方法第2部分:颗粒状物料的抽样 Statistical aspects of sampling from bulk materials -- Part 2: Sampling of particulate materials |
| 72 | ISO 11650-1999 | 制冷的回收和/或再循环设备的性能 Performance of refrigerant recovery and/or recycling equipment |
| 73 | ISO 11652-1997 | 钢和铁钴含量测定原子吸收分光光度测定法 Steel and iron -- Determination of cobalt content -- Flame atomic absorption spectrometric method |
| 74 | ISO 11648.1-2003 | 散装材料抽样的统计观点 第1部分：一般原则 Statistical Aspects of Sampling from Bulk Materials - Part 1: General Principles First Edition |
| 75 | ISO 11653-1997 | 钢高钴含量的测定用离子交换分离法分离后的电势滴定法 Steel -- Determination of high cobalt content -- Potentiometric titration method after separation by ion exchange |
| 76 | ISO 11654-1997 | 声学建筑物用声音吸收装置吸声率 Acoustics -- Sound absorbers for use in buildings -- Rating of sound absorption |
| 77 | ISO 11655-1995 | 明渠液体流量测量水文设备性能的规定方法 Measurement of liquid flow in open channels -- Method of specifying performance of hydrometric equipment |
| 78 | ISO 11659.1-1995 | 纺织机械及其配件与纺织加工油接触的机器部件第1部分:钢防腐效果的测定 Textile machinery and accessories -- Machine parts in contact with textile processing oils -- Part 1: Determination of anticorrosive effect upon steel |
| 79 | ISO 11660.1-1999 | 起重机检修保护和限制第1部分:一般 Cranes -- Access guards and restraints -- Part 1: General |
| 80 | ISO 11660.2-1994 | 起重机进入口防护装置限制器移动起重机 Cranes -- Access guards and restraints -- Part 2: Mobile cranes |
| 81 | ISO 11660.3-1999 | 起重机检修保护和限制第1部分:塔式起重机 Cranes -- Access guards and restraints -- Part 3: Tower cranes |
| 82 | ISO 11660.5-2001 | 起重机检修、保护和限制第5部分:桥式和龙门起重机 Cranes -- Access guards and restraints -- Part 5: Bridge and gantry cranes |
| 83 | ISO 11659.2-2004 | 纺织机械与附件 与纺织加工油剂接触的机械零部件 第2部分：对聚合材料影响的测定 Textile machinery and accessories -- Machine parts in contact with textile processing oils -- Part 2: Determination of the impact on polymeric materials |
| 84 | ISO 11659.3-2004 | 纺织机械与附件 与纺织加工油剂接触的机械零部件 第3部分：对油漆影响的测定 Textile machinery and accessories -- Machine parts in contact with textile processing oils -- Part 3: Determination of the impact on lacquers |
| 85 | ISO 11661-1998 | 移动式起重机额定荷载能力图解表示 Mobile cranes -- Presentation of rated capacity charts |
| 86 | ISO 11662.1-1995 | 汽车起重机起重机实验工作性能的测定第1部分:卸载和工作半径 Mobile cranes -- Experimental determination of crane performance -- Part 1: Tipping loads and radii |
| 87 | ISO 11667-1997 | 纤维增强塑料模压化合物和聚酯胶片树脂纤维增强和矿物填料含量的测定溶解方法 Fibre-reinforced plastics -- Moulding compounds and prepregs -- Determination of resin reinforced-fibre and mineral-filler content -- Dissolution methods |
| 88 | ISO 11668-1997 | 涂料和清漆用粘结剂含氯聚合树脂通用试验方法 Binders for paints and varnishes -- Chlorinated polymerization resins -- General methods of test |
| 89 | ISO 1167-1996 | 输送流体用热塑性塑料管耐内压性试验方法 Thermoplastics pipes for the conveyance of fluids -- Resistance to internal pressure -- Test method |
| 90 | ISO 1167 Technical Corrigendum 1-1997 | 输送流体用塑料管耐内压的试验方法技术勘误表1 Thermoplastics pipes for the conveyance of fluids - Resistance to internal pressure - Test method; Technical Corrigendum 1 |
| 91 | ISO 11670-2003 | 激光和激光相关设备激光束参数的试验方法束定位稳定性 Lasers and laser-related equipment -- Test methods for laser beam parameters -- Beam positional stability |
| 92 | ISO 11673-2005 | 硬聚氯乙烯压力管道 断裂韧性的测定 Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes -- Determination of the fracture toughness properties |
| 93 | ISO 11676-1994 | 纺织机器及附件经编机用链环词汇及符号 Textile machinery and accessories -- Chain links for warp knitting machines -- Vocabulary and symbols |
| 94 | ISO 11677.1-1994 | 纺织机械和辅助装置有自由端线圈的扁钢柄的主要尺寸第1部分:C形综耳 Textile machinery and accessories -- Main dimensions of flat steel healds with open end loops -- Part 1: C-shaped end loops |
| 95 | ISO 11677.2-1994 | 纺织机械和辅助装置有自由端线圈的扁钢柄的主要尺寸第2部分:J形综耳 Textile machinery and accessories -- Main dimensions of flat steel healds with open end loops -- Part 2: J-shaped end loops |
| 96 | ISO 11677.3-1995 | 纺织机械和辅助装置有自由端线圈的扁钢柄的主要尺寸第3部分:有C形和J形综耳的综片用导杆 Textile Machinery and Accessories - Main Dimensions of Open End Loop Flat Steel Healds and Their Corresponding Heald- Carrying Rods - Part 3: Carrying Rods for Healds with C- and J-Shaped End Loops First Edition |
| 97 | ISO 11678-1996 | 农业排灌机械铝制灌溉管 Agricultural Irrigation Equipment - Aluminium Irrigation Tubes First Edition |
| 98 | ISO 11680.1-2000 | 林业机械动力杆式修枝锯的安全要求和试验第1部分:侧挂式杆式修枝锯 Machinery for forestry -- Safety requirements and testing for pole-mounted powered pruners -- Part 1: Units fitted with an integral combustion engine |
| 99 | ISO 11680.2-2000 | 林业机械动力杆式修枝锯的安全要求和试验第2部分:携背负式杆式修枝锯 Machinery for forestry -- Safety requirements and testing for pole-mounted powered pruners -- Part 2: Units for use with a back-pack power source |
| 100 | ISO 11674 Technical Corrigendum 1-2001 | 船只和船舶技术航向控制系统技术勘误1 Ships and marine technology - Heading control systems; Technical Corrigendum 1 |