| 序号 | 标准号 | 标准名称 |
 1 | ISO 1107-2003 | 渔网网基本术语和定义 Fishing nets Netting Basic terms and definitions Second Edition |
| 2 | ISO 1107-1974 | 渔网网基本术语和定义 Fishing Nets - Netting - Basic Terms and Definitions First Edition |
| 3 | ISO 11074.1-1996 | 土壤质量词汇第1部分:土壤保护和污染的相关术语和定义 Soil quality -- Vocabulary -- Part 1: Terms and definitions relating to the protection and pollution of the soil |
| 4 | ISO 1108-1992 | 香料和调味品非挥发乙醚萃取测定 Spices and condiments -- Determination of non-volatile ether extract |
| 5 | ISO 11082-1992 | 混凝土构件增强用焊接制品的认证方案 Certification scheme for welded fabric for the reinforcement of concrete structures |
| 6 | ISO 11083-1994 | 水质四氯化铬的测定用于15的二苯卡巴肼的光谱法 Water quality -- Determination of chromium(VI) -- Spectrometric method using 15-diphenylcarbazide |
| 7 | ISO 11084.1-1993 | 印刷技术摄影材料、银箔和相纸的记录系统第1部分:3针系统 Graphic technology -- Register systems for photographic materials foils and paper -- Part 1: Three-pin systems |
| 8 | ISO 11086-1996 | 燃气轮机词汇 Gas turbines -- Vocabulary |
| 9 | ISO 11089-1997 | 生合成橡胶用高效液体色谱分析法测定抗退化性 Rubber raw synthetic -- Determination of anti-degradants by high-performance liquid chromatography |
| 10 | ISO 11090.1-1998 | 机床电卸料刻模机的试验条件术语和精度试验第1部分:单柱架式凿岩机(纵横移动台型和固定工作台型) Machine tools -- Test conditions for die sinking electro-discharge machines (EDM) -- Terminology and testing of accuracy -- Part 1: Single column machines (cross slide table type and fixed table type) |
| 11 | ISO 11090.2-1998 | 机床电卸料刻模机的试验条件术语和精度试验第2部分:双柱架式凿岩机(移动头型和纵横移动工作台型) Machine tools -- Test conditions for die sinking electro-discharge machines (EDM) -- Terminology and testing of accuracy -- Part 2: Two column machines (slide-head type and cross-slide table type) |
| 12 | ISO 11087-2004 | 高山滑雪板装配紧固装置安全要求和试验方法 Alpine ski-bindings -- Retention devices -- Requirements and test methods |
| 13 | ISO 11088-2004 | 高山雪橇/联接装置/靴系统装配的调整和检验 Assembly adjustment and inspection of an alpine ski/binding/boot (S-B-B) system |
| 14 | ISO 11091-1994 | 建筑制图园林设计制图实用规程 Construction drawings -- Landscape drawing practice |
| 15 | ISO 11092-1993 | 纺织品生理效应稳态条件下耐热和耐水蒸汽性能的测量 Textiles -- Physiological effects -- Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
| 16 | ISO 11093.1-1994 | 纸和纸板硬纸板锥形圆筒的检验第1部分:取样 Paper and board -- Testing of cores -- Part 1: Sampling |
| 17 | ISO 11093.2-1994 | 纸和纸板硬纸板锥形圆筒的检验第2部分:试样的条件 Paper and board -- Testing of cores -- Part 2: Conditioning of test samples |
| 18 | ISO 11093.3-1994 | 纸和纸板硬纸板锥形圆筒的检验第3部分:利用烘干法对其含水量的测定 Paper and board -- Testing of cores -- Part 3: Determination of moisture content using the oven drying method |
| 19 | ISO 11093.4-1997 | 纸和纸板硬纸板锥形圆筒的检验第1部分:尺寸测量 Paper and board -- Testing of cores -- Part 4: Measurement of dimensions |
| 20 | ISO 11093.5-1994 | 纸和纸板硬纸板锥形圆筒的检验第5部分:同心旋转特性的测定 Paper and board -- Testing of cores -- Part 5: Determination of characteristics of concentric rotation |
| 21 | ISO 11093.7-1997 | 纸和纸板硬纸板圆筒的检验用三点法测定弯曲模量 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method |
| 22 | ISO 11093.8-1997 | 纸和纸板硬纸板锥形圆筒的检验第8部分:试验模型分析法测定自然频率和弯曲模量 Paper and board -- Testing of cores -- Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis |
| 23 | ISO 11093.6-2005 | 纸和纸板硬纸板圆筒的检验用三点法测定抗弯强度 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method |
| 24 | ISO 11093.9-1994 | 纸和纸板硬纸板锥形圆筒的检验第9部分:抗压扁性的测定 Paper and board -- Testing of cores -- Part 9: Determination of flat crush resistance |
| 25 | ISO 11094-1991 | 声学由电动剪草机、草地拖拉机、草地和园艺拖拉机、专用切草机和带有切草附件的草地和园艺拖拉机发出的空气噪声的测量试验规范 Acoustics -- Test code for the measurement of airborne noise emitted by power lawn mowers lawn tractors lawn and garden tractors professional mowers and lawn and garden tractors with mowing attachments |
| 26 | ISO 11095-1996 | 利用标准物质作线性校准 Linear calibration using reference materials |
| 27 | ISO 11096-2002 | 道路车辆行人防护行人的大腿腿和膝盖的冲击试验方法 Road vehicles -- Pedestrian protection -- Impact test method for pedestrian thigh leg and knee |
| 28 | ISO 1110-1995 | 塑料聚酰胺试样的加速调配 Plastics -- Polyamides -- Accelerated conditioning of test specimens |
| 29 | ISO 11102.1-1997 | 内燃机手柄起动装置安全技术要求和检验 Reciprocating internal combustion engines -- Handle starting equipment -- Part 1: Safety requirements and tests |
| 30 | ISO 11102.2-1997 | 内燃机手柄起动装置第2部分:测量脱扣距离和角度的方法 Reciprocating internal combustion engines -- Handle starting equipment -- Part 2: Method of testing the angle of disengagement |
| 31 | ISO 11103-1991 | 空间数据和信息传输系统无线电测量和轨道数据 Space data and information transfer systems -- Radio metric and orbit data |
| 32 | ISO 11105-1997 | 小型船舶汽油发动机和/或汽油罐防水船舱的通风 Small craft -- Ventilation of petrol engine and/or petrol tank compartments |
| 33 | ISO 11104-2003 | 空间数据和信息传输系统时间码格式 Space data and information transfer systems -- Time code formats |
| 34 | ISO 11106.1-1997 | 摄影术放影师冲洗幻灯片用浅盘子第1部分:敞口式直放冲洗幻灯片盘(欧洲设计的) Photography -- Slide trays for projectors -- Part 1: Straight slide tray open type (European design) |
| 35 | ISO 11106.2-1997 | 摄影术放影师冲洗幻灯片用浅盘子第2部分:封闭式直放冲洗幻灯片盘(日本设计的) Photography -- Slide trays for projectors -- Part 2: Straight slide tray closed type (Japanese design) |
| 36 | ISO 11108-1996 | 信息和文献工作档案纸稳定耐久性的要求 Information and documentation -- Archival paper -- Requirements for permanence and durability |
| 37 | ISO 11110-1997 | 冬运设备雪橇功能部件/滑雪靴/雪橇连接装置调节装置用试验设备要求和试验 Winter-sports equipment -- Test devices for the setting of the functional unit ski/boot/binding -- Requirements and tests |
| 38 | ISO 11111.1-2005 | 纺织机器的安全要求 第1部分:一般要求 Textile machinery -- Safety requirements -- Part 1: Common requirements |
| 39 | ISO 11111.2-2005 | 纺织机械 安全要求 第2部分：纺前准备和纺纱机 Textile machinery -- Safety requirements -- Part 2: Spinning preparatory and spinning machines |
| 40 | ISO 11111.3-2005 | 纺织机械 安全要求 第3部分：无纺机械 Textile machinery -- Safety requirements -- Part 3: Nonwoven machinery |
| 41 | ISO 11111.4-2005 | 纺织机械 安全要求 第4部分：纱线加工和并捻机械 Textile machinery -- Safety requirements -- Part 4: Yarn processing cordage and rope manufacturing machinery |
| 42 | ISO 11111.5-2005 | 纺织机械 安全要求 第5部分：机织和针织准备机械 Textile machinery -- Safety requirements -- Part 5: Preparatory machinery to weaving and knitting |
| 43 | ISO 11111.6-2005 | 纺织机械 安全要求 第6部分：织造机械 Textile machinery -- Safety requirements -- Part 6: Fabric manufacturing machinery |
| 44 | ISO 11112-1995 | 土方机械驾驶员座椅的尺寸和要求 Earth-moving machinery -- Operators seat -- Dimensions and requirements |
| 45 | ISO 11113-1995 | 液化气气瓶(乙炔和液化石油气)充气时间的检验 Cylinders for liquefied gases (excluding acetylene and LPG) -- Inspection at time of filling |
| 46 | ISO 11114.1-1997 | 可运输气瓶气瓶和含气阀门材料的可兼容性第1部分:金属材料 Transportable gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 1: Metallic materials |
| 47 | ISO 11114.2-2000 | 可运输气瓶气瓶和含气阀门材料的可兼容性第2部分:非金属材料 Transportable gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 2: Non-metallic materials |
| 48 | ISO 11114.3-1997 | 可运输气瓶气瓶和含气阀门材料的可兼容性第3部分:有氧环境中自燃试验 Transportable gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 3: Autogenous ignition test in oxygen atmosphere |
| 49 | ISO 11116.1-1999 | 气体瓶阀门与气体瓶连接的17E锥型螺纹第1部分:规范 Gas cylinders -- 17E taper thread for connection of valves to gas cylinders -- Part 1: Specifications |
| 50 | ISO 11116.2-1999 | 气体瓶阀门与气体瓶连接的17E锥型螺纹第1部分:检验量规 Gas cylinders -- 17E taper thread for connection of valves to gas cylinders -- Part 2: Inspection gauges |
| 51 | ISO 11112 AMD 1-2001 | 土方机械驾驶员座椅尺寸和要求修改件1 Earth-moving machinery - Operators seat - Dimensions and requirements; Amendment 1 |
| 52 | ISO 11111.7-2005 | 纺织机械 安全要求 第7部分：染整机械 Textile machinery -- Safety requirements -- Part 7: Dyeing and finishing machinery |
| 53 | ISO 11117-1998 | 气瓶工业和医疗气瓶用阀护罩和阀挡设计、制作和试验 Gas cylinders -- Valve protection caps and valve guards for industrial and medical gas cylinders -- Design construction and tests |
| 54 | ISO 11118-1999 | 储气瓶非再填充式金属气瓶规范和试验方法 Gas cylinders -- Non-refillable metallic gas cylinders -- Specification and test methods |
| 55 | ISO 11120-1999 | 气体瓶150升-3000升水容量的可再填充的无缝钢管设计结构和试验 Gas cylinders -- Refillable seamless steel tubes for compressed gas transport of water capacity between 150 l and 3000 l -- Design construction and testing |
| 56 | ISO 1112-1999 | 计时仪器功能和非功能宝石 Horology -- Functional and non-functional jewels |
| 57 | ISO 11124.1-1993 | 涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料规范第1部分:一般说明和分类 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 1: General introduction and classification |
| 58 | ISO 11124.2-1993 | 涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料规范第2部分:冷硬铸铁砂粒 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 2: Chilled-iron grit |
| 59 | ISO 11124.3-1993 | 涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料规范第3部分:高碳铸钢喷丸及砂粒 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 3: High-carbon cast-steel shot and grit |
| 60 | ISO 11119.1-2002 | 复合结构的气瓶规范和试验方法第1部分:箍绕复合气瓶 Gas cylinders of composite construction -- Specification and test methods -- Part 1: Hoop wrapped composite gas cylinders |
| 61 | ISO 11119.2-2002 | 复合结构气瓶规范和试验方法第2部分:完全增加纤维带承载金属内衬的复合气瓶 Gas cylinders of composite construction -- Specification and test methods -- Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners |
| 62 | ISO 11119.3-2002 | 混合结构气瓶规范和试验方法第3部分:无负载共用金属或非金属衬里的全缠绕纤维增强混合气瓶 Gas cylinders of composite construction -- Specification and test methods -- Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners |
| 63 | ISO 11124.4-1993 | 涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料规范第4部分:低碳铸钢喷丸 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 4: Low-carbon cast-steel shot |
| 64 | ISO 11125.1-1993 | 涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料的试验方法第1部分:取样 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 1: Sampling |
| 65 | ISO 11125.2-1993 | 涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料的试验方法第2部分:粒径分布测定 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution |
| 66 | ISO 11125.3-1993 | 涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料的试验方法第3部分:硬度测定 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 3: Determination of hardness |
| 67 | ISO 11125.4-1993 | 涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料的试验方法第4部分:表观密度测定 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 4: Determination of apparent density |
| 68 | ISO 11125.5-1993 | 涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料的试验方法第5部分:有缺陷颗粒百分比和微结构的测定 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 5: Determination of percentage defective particles and of microstructure |
| 69 | ISO 11125.6-1993 | 涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料的试验方法第6部分:杂质的测定 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 6: Determination of foreign matter |
| 70 | ISO 11125.7-1993 | 涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料的试验方法第7部分:湿度的测定 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 7: Determination of moisture |
| 71 | ISO 11126.1 Technical Corrigendum 1-1997 | 清漆及有关产品使用前对钢底衬的制备非金属喷沙清理磨料规范第1部分:总论和分类技术勘误表1 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 1 |
| 72 | ISO 11126.1 Technical Corrigendum 2-1997 | 清漆及有关产品使用前对钢底衬的制备非金属喷沙清理磨料规范第1部分:总论和分类技术勘误表2 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 2 |
| 73 | ISO 11126.10-2000 | 涂料及有关产品使用前对钢底衬的制备非金属喷沙清理磨料规范第10部分:石榴石 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 10: Almandite garnet |
| 74 | ISO 11126.1-1993 | 涂料及有关产品使用前对钢底衬的制备非金属喷沙清理磨料规范第1部分:总论和分类 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 1: General introduction and classification |
| 75 | ISO 11126.3-1993 | 涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料的规范第3部分:炼铜熔渣制喷丸 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 3: Copper refinery slag |
| 76 | ISO 11126.4-1993 | 涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料的规范第4部分:煤炉熔渣 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 4: Coal furnace slag |
| 77 | ISO 11126.5-1993 | 涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料的规范第5部分:炼镍熔渣制喷丸 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 5: Nickel refinery slag |
| 78 | ISO 11126.6-1993 | 涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料的规范第5部分:铁炉熔渣 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag |
| 79 | ISO 11126.7-1995 | 涂料和相关制品使用前钢衬底的制备喷砂清理磨料的规范第7部分:熔融氧化铝 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 7: Fused aluminium oxide |
| 80 | ISO 11126.7 Technical Corrigendum 1-1999 | 清漆及有关产品使用前对钢底衬的制备非金属喷沙清理磨料规范第7部分:熔化氧化铝技术勘误1 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide; Technical Corrigendum 1 |
| 81 | ISO 11126.8-1993 | 涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料的规范第8部分:橄榄石沙 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 8: Olivine sand |
| 82 | ISO 11126.9-1999 | 清漆及有关产品使用前对钢底衬的制备非金属喷沙清理磨料规范第9部分:十字石 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 9: Staurolite |
| 83 | ISO 11127.1-1993 | 涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料的试验方法第1部分:取样 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 1: Sampling |
| 84 | ISO 11127.2-1993 | 涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料的试验方法第2部分:粒径分布测定 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution |
| 85 | ISO 11127.3-1993 | 涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料的试验方法第3部分:表观密度测定 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 3: Determination of apparent density |
| 86 | ISO 11127.4-1993 | 涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料的试验方法第4部分:玻璃划痕试验法评定硬度 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 4: Assessment of hardness by a glass slide |
| 87 | ISO 11127.5-1993 | 涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料的试验方法第5部分:湿度测定 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 5: Determination of moisture |
| 88 | ISO 11127.6-1993 | 涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料的试验方法第6部分:通过测量传导性测定水溶杂质 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 6: Determination of water-soluble contaminants by conductivity measurement |
| 89 | ISO 11127.7-1993 | 涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料的试验方法第7部分:水溶氯化物的测定 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 7: Determination of water-soluble chlorides |
| 90 | ISO 11130-1999 | 金属和合金的腐蚀盐溶液中的交替浸入试验 Corrosion of metals and alloys -- Alternate immersion test in salt solution |
| 91 | ISO 11131-1992 | 银行和有关金融业务签字鉴定 Banking and related financial services -- Sign-on authentication |
| 92 | ISO 1113-1979 | 信息处理穿孔纸带的7位编码字符集表示法 Information processing -- Representation of the 7- bit coded character set on punched tape |
| 93 | ISO 11134-1994 | 卫生防疫用品的消毒批准和控制程序工业湿热的消毒 Sterilization of health care products -- Requirements for validation and routine control -- Industrial moist heat sterilization |
| 94 | ISO 11135-1994 | 医疗设备用环氧乙烷消毒的批准和控制程序工业湿热的消毒 Medical devices -- Validation and routine control of ethylene oxide sterilization |
| 95 | ISO 11137-1995 | 卫生管理制品的灭菌批准和常规控制的要求辐射灭菌 Sterilization of health care products -- Requirements for validation and routine control -- Radiation sterilization |
| 96 | ISO 11135 Technical Corrigendum 1-1994 | 医疗设备用环氧乙烷消毒的批准和控制程序工业湿热的消毒技术勘误表1 Medical devices - Validation and routine control of ethylene oxide sterilization; Technical Corrigendum 1 |
| 97 | ISO 11137 AMD 1-2001 | 医疗保健产品的灭菌确认和常规控制要求辐射灭菌剂量设定条件的选择 Sterilization of health care products - Requirements for validation and routine control - Radiation sterilization; Amendment 1: Selection of terms for dose setting |
| 98 | ISO 11137 Technical Corrigendum 1-1997 | 护理制品的灭菌证实和过程控制要求辐射灭菌技术勘误表1 Sterilization of health care products - Requirements for validation and routine control - Radiation sterilization; Technical Corrigendum 1 |
| 99 | ISO 11138.1-1994 | 保健产品的消毒生物指示剂第1部分:通则 Sterilization of health care products -- Biological indicators -- Part 1: General |
| 100 | ISO 11138.2-1994 | 保健产品的消毒生物指示剂第2部分:环氧乙烷灭菌用生物指示剂 Sterilization of health care products -- Biological indicators -- Part 2: Biological indicators for ethylene oxide sterilization |