| 序号 | 标准号 | 标准名称 |
 1 | ISO 2005-1992 | 天然橡胶胶乳浓缩物污泥含量的测定 Rubber latex natural concentrate -- Determination of sludge content |
| 2 | ISO 2004-1997 | 天然橡胶胶乳浓缩物离心分离或搅拌成乳状的加氨保存型规范 Natural rubber latex concentrate -- Centrifuged or creamed ammonia-preserved types -- Specification |
| 3 | ISO 20127-2005 | 齿科 电动牙刷 一般要求和试验方法 Dentistry -- Powered toothbrushes -- General requirements and test methods |
| 4 | ISO 20117-2004 | Information technology Telecommunications and information exchange between systems Private Integrated Services Network Interexchange signalling protocol Message centre monitoring and mailbox identification supplementary services First Edition |
| 5 | ISO 20116-2004 | Information technology Telecommunications and information exchange between systems Private Integrated Services Network Specification functional model and information flows Message centre monitoring and mailbox identification supplementary services F |
| 6 | ISO 20115-2004 | Information technology Telecommunications and information exchange between systems Private Integrated Services Network Use of QSIG for Message Centre Access (MCA) profile standard First Edition |
| 7 | ISO 20113-2004 | Information technology Telecommunications and information exchange between systems Private Integrated Services Network Specification functional model and information flows Make call request supplementary service First Edition |
| 8 | ISO 20162-2001 | 信息技术用不可逆效应在写一次读多次(WORM)的300mm光盘上的数据交换容量:3兆字节/盒 Information Technology - Data Interchange on 300 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using Irreversible Effects - Capacity: 30 Gbytes Per Cartridge First Edition |
| 9 | ISO 2016-1981 | 铜管用毛细管焊接接头组装尺寸和试验 Capillary solder fittings for copper tubes -- Assembly dimensions and tests |
| 10 | ISO 20161-2001 | 信息技术系统间的电信和信息交换专业综合业务网在PINX和互连网间的C参考点的QSIG的使用 Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Use of QSIG at the C Reference Point between a PINX and an Interconnecting Network First Edition |
| 11 | ISO 2012-1976 | 纺织机械和附件锥形分条整经机最大有效宽度 Textile machinery and accessories -- Cone sectional warping machines -- Maximum usable width |
| 12 | ISO 20202-2004 | 铝生产用碳素材料 冷压与微热压糊料 焙烤试样的制备和焙烤损失的测定 Carbonaceous materials used in the production of aluminium -- Cold and tepid ramming pastes -- Preparation of baked test pieces and determination of loss on baking |
| 13 | ISO 20200-2004 | 塑料 实验室规模试验模拟混合条件下塑料蜕变度的测定 Plastics -- Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test |
| 14 | ISO 2023-1994 | 橡胶鞋靴业用的有衬里硫化橡胶长靴 Rubber footwear -- Lined industrial vulcanized-rubber boots -- Specification |
| 15 | ISO 2023 Technical Corrigendum 1-2001 | 橡胶鞋靴有衬里的工业硫化橡胶靴规范技术勘误1 Rubber footwear - Lined industrial vulcanized-rubber boots - Specification; Technical Corrigendum 1 |
| 16 | ISO 2026-1974 | 飞机发动机空气起动连接装置 Aircraft -- Connections for starting engines by air |
| 17 | ISO 2022-1994 | 信息技术字符码结构和扩展技术 Information Technology - Character Code Structure and Extension Techniques Fourth Edition; Technical Corrigendum 1: 04/15/1999 |
| 18 | ISO 2020.2-1997 | 航空航天飞机控制装置的预成形可弯曲钢丝绳第2部分:技术规范 Aerospace -- Preformed flexible steel wire rope for aircraft controls -- Part 2: Technical specification |
| 19 | ISO 2020-1-1997 | 航空航天飞机控制装置的预成形可弯曲钢丝绳第1部分:尺寸和负载能力 Aerospace -- Preformed flexible steel wire rope for aircraft controls -- Part 1: Dimensions and loads |
| 20 | ISO 2017-1982 | 振动和冲击隔振器特性规定的方法 Vibration and shock -- Isolators -- Procedure for specifying characteristics |
| 21 | ISO 20344-2004 | 个人防护器具 鞋类试验方法 Personal protective equipment -- Test methods for footwear |
| 22 | ISO 20279-2005 | 土质 铊的萃取和电热原子吸收光谱法的测定 Soil quality -- Extraction of thallium and determination by electrothermal atomic absorption spectrometry |
| 23 | ISO 20340-2003 | 色漆和清漆 海上和有关结构防护漆系的性能要求 Paints and varnishes -- Performance requirements for protective paint systems for offshore and related structures |
| 24 | ISO 20341-2003 | 表面化学分析 次级离子质谱法 用多Δ层参考物质估算深度分辨参数的方法 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for estimating depth resolution parameters with multiple delta-layer reference materials |
| 25 | ISO 2033-1983 | 信息处理机读字符的编码(MICR和OCR) Information processing -- Coding of machine readable characters (MICR and OCR) |
| 26 | ISO 2032-1973 | 飞机的耐热设备金属丝 Heat-resisting equipment wires for aircraft |
| 27 | ISO 2031-1991 | 碎粒软木塞体积密度的测定 Granulated cork -- Determination of bulk density |
| 28 | ISO 2030-1990 | 粒状软木用机械筛分法的粒度分析 Granulated cork -- Size analysis by mechanical sieving |
| 29 | ISO 2028-1999 | 合成橡胶胶乳干聚合物的制备 Synthetic rubber latex -- Preparation of dry polymer |
| 30 | ISO 2027-1990 | 天然胶乳的蒸发浓缩和防老化规范 Natural rubber latex concentrate evaporated preserved -- Specification |
| 31 | ISO 20347-2004 | 个人防护用品 劳动防护靴 Personal protective equipment -- Occupational footwear |
| 32 | ISO 20346-2004 | 个人防护用品 防护靴 Personal protective equipment -- Protective footwear |
| 33 | ISO 20345-2004 | 个人防护器具 安全靴 Personal protective equipment -- Safety footwear |
| 34 | ISO 20401-2005 | 气压传动系统 方向控制阀 直径8 mm和12 mm电气圆插头的针脚位置规范 Pneumatic fluid power systems -- Directional control valves -- Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm |
| 35 | ISO 20361 | (Pending)Liquid Pumps and Pumps Units - Noise Test Code - Grades 2 and 3 of Accuracy First Edition |
| 36 | ISO 2039-2-1987 | 塑料硬度的测定第2部分:洛氏硬度 Plastics -- Determination of hardness -- Part 2: Rockwell hardness |
| 37 | ISO 2039-1-2001 | 塑料硬度测定第1部分:压球法 Plastics -- Determination of hardness -- Part 1: Ball indentation method |
| 38 | ISO 2037-1992 | 工业用不锈钢管 Stainless steel tubes for the food industry |
| 39 | ISO 2036-1976 | 木地板用木材材种标号 Wood for manufacture of wood flooring -- Symbols for marking according to species |
| 40 | ISO 2035-1974 | 压力管用有弹性密封圈型接头的未增塑聚氯乙烯(PVC)模塑配件耐压试验 Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure -- Pressure-resistance test |
| 41 | ISO 20433-2005 | Leather -- Tests for colour fastness -- Colour fastness to crocking |
| 42 | ISO 20421-2-2005 | 低温容器 大型便携式真空保温容器 第2部分：操作要求 Cryogenic vessels -- Large transportable vacuum-insulated vessels -- Part 2: Operational requirements |
| 43 | ISO 2047-1975 | 信息处理7位编码字符集的控制字符的图形表示法 Information processing -- Graphical representations for the control characters of the 7- bit coded character set |
| 44 | ISO 2046-1973 | 飞机上呼吸用气态氧的供应 Gaseous breathing oxygen supplies for aircraft |
| 45 | ISO 2045-1988 | 有弹性密封环型连接的非增塑聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C)压力管的单头接口最小接合深度 Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints -- Minimum depths of engagement |
| 46 | ISO 2044-1974 | 压力管用注塑溶剂粘接的未增塑聚氯乙烯(PVC)套接口配件管内液压试验 Unplasticized polyvinyl chloride (PVC) injection-moulded solvent-welded socket fittings for use with pressure pipe -- Hydraulic internal pressure test |
| 47 | ISO 2042-1973 | 飞机电路图 Aircraft electrical circuit diagrams |
| 48 | ISO 204-1997 | 金属材料拉力试验中的连续单轴蠕变试验方法 Metallic materials -- Uninterrupted uniaxial creep testing in tension -- Method of test |
| 49 | ISO 2041-1990 | 振动和冲击词汇 Vibration and shock -- Vocabulary |
| 50 | ISO 2040-1972 | 色漆用铬酸锶颜料 Strontium chromate pigments for paints |
| 51 | ISO 20566-2005 | 色漆和清漆 用实验室车车辆清洗设备对涂层系耐刮性能的测定 Paints and varnishes -- Determination of the scratch resistance of a coating system using a laboratory car-wash |
| 52 | ISO 20509-2003 | 精细陶瓷(高级陶瓷、高技术陶瓷) 无氧化物单片陶瓷耐氧化性能的测定 Fine ceramics (advanced ceramics advanced technical ceramics) -- Determination of oxidation resistance of non-oxide monolithic ceramics |
| 53 | ISO 20508-2003 | 精细陶瓷(高级陶瓷、高技术陶瓷) 透明基质瓷膜透光率的测定 Fine ceramics (advanced ceramics advanced technical ceramics) -- Determination of light transmittance of ceramic films with transparent substrate |
| 54 | ISO 20507-2003 | 精细陶瓷 (先进陶瓷、高技术陶瓷) 词汇 Fine ceramics (advanced ceramics advanced technical ceramics) -- Vocabulary |
| 55 | ISO 20501-2003 | 精细陶瓷 (高级陶瓷、高技术陶瓷） 威布尔强度数据统计 Fine ceramics (advanced ceramics advanced technical ceramics) -- Weibull statistics for strength data |
| 56 | ISO 20482-2003 | 金属材料 板材和带材 杯突试验 Metallic materials -- Sheet and strip -- Erichsen cupping test |
| 57 | ISO 20563-2001 | 信息技术80MM(123比特每边)和120MMDVD可记录光盘 Information Technology - 80 mm (123 Gbytes Per Side) and 120 mm (395 Gbytes Per Side) DVD-Recordable Disk (DVD-R) First Edition |
| 58 | ISO 2049-1996 | 石油产品颜色的测定(ASTM尺度) Petroleum products -- Determination of colour (ASTM scale) |
| 59 | ISO 2048-1990 | 有弹性密封圈型接头的未增塑聚氯乙烯(PVC)压力管的双头套接口最小接合深度 Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints -- Minimum depths of engagement |
| 60 | ISO 2063-2005 | 金属涂层和其它无机物涂层热喷镀锌、铝、及其合金 Thermal spraying -- Metallic and other inorganic coatings -- Zinc aluminium and their alloys |
| 61 | ISO 20567-2-2005 | 色漆和清漆 涂层耐石屑性能的测定 第2部分：用导向冲击体的单次冲击试验 Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 2: Single-impact test with a guided impact body |
| 62 | ISO 20567-1-2005 | 色漆和清漆 涂层耐石屑性能的测定 第1部分：多次冲击试验 Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 1: Multi-impact testing |
| 63 | ISO 20623-200 | 石油和有关产品 流体极限压力和抗磨性能的测定 四球法(欧洲条件） Petroleum and related products -- Determination of the extreme-pressure and anti-wear properties of fluids -- Four ball method (European conditions) |
| 64 | ISO 20643 | (Pending)Hand-Transmitted Vibration from Hand-Held or Hand-Guided Machinery - Testing of Vibration at the Grip Surface First Edition |
| 65 | ISO 2062-1993 | 纺织品纱线卷装件单纱断裂力和断裂伸长 Textiles -- Yarns from packages -- Determination of single-end breaking force and elongation at break |
| 66 | ISO 2064-1996 | 金属镀层和其它无机物涂层有关厚度测量的定义和协定 Metallic and other inorganic coatings -- Definitions and conventions concerning the measurement of thickness |
| 67 | ISO 2061-1995 | 纺织品纱线捻度的测定直接计数法 Textiles -- Determination of twist in yarns -- Direct counting method |
| 68 | ISO 2060-1994 | 纺织品筒子纱线密度(单位长度的质量)的测定绞纱法 Textiles -- Yarn from packages -- Determination of linear density (mass per unit length) by the skein method |
| 69 | ISO 2057-1981 | 农业拖拉机拖挂农具的遥控液压缸 Agricultural tractors -- Remote control hydraulic cylinders for trailed implements |
| 70 | ISO 20683-2-2004 | 航空地面设备 接有对面起落装置的无拖杆拖车的设计、试验和维护 第2部分：区域飞机 Aircraft ground equipment -- Design test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear -- Part 2: Regional aircraft |
| 71 | ISO 20645-2004 | 纺织织物 抗菌能力的测定 琼脂扩散板试验 Textile fabrics -- Determination of antibacterial activity -- Agar diffusion plate test |
| 72 | ISO 20683-1-2005 | 称： 航空地面设备 接有对面起落装置的无拖杆拖车的设计、试验和维护 第1部分：主干线飞机 Aircraft ground equipment -- Design test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear -- Part 1: Main-line aircraft |
| 73 | ISO 2066-2004 | Resilient floor coverings -- Determination of moisture content of agglomerated composition cork |
| 74 | ISO 2071-1976 | 金属铝生产用氧化铝锌含量的测定火焰原子吸收法 Aluminium oxide primarily used for the production of aluminium -- Determination of zinc content -- Flame atomic absorption method |
| 75 | ISO 2070-1997 | 金属铝生产用原生氧化铝钙含量的测定 Aluminium oxide primarily used for the production of aluminium -- Determination of calcium content |
| 76 | ISO 2069-1976 | 金属铝生产用氧化铝钙含量的测定火焰原子吸收法 Aluminium oxide primarily used for the production of aluminium -- Determination of calcium content -- Flame atomic absorption method |
| 77 | ISO 2067-1998 | 粒状软木取样 Granulated cork -- Sampling |
| 78 | ISO 2068-1972 | 色漆用铬酸钡颜料 Barium chromate pigments for paints |
| 79 | ISO 2066-1986 | 纯粘结膨胀软木含水量的测定 Expanded Pure Agglomerated Cork - Determination of Moisture Content Second Edition |
| 80 | ISO 20763-2004 | 石油和有关产品 液压油耐磨性能的测定 叶轮泵法 Petroleum and related products -- Determination of anti-wear properties of hydraulic fluids -- Vane pump method |
| 81 | ISO 20727-2004 | 纺织机械 棉纺混棉开棉机 词汇和制造原则 Textile machinery -- Mixing bale openers for cotton spinning -- Vocabulary and principles of construction |
| 82 | ISO 20726-2004 | 纺织机械 棉纺给棉器 词汇和制造原则 Textile machinery -- Hopper feeders for cotton spinning -- Vocabulary and principles of construction |
| 83 | ISO 20725-2004 | 纺织机械 棉纺冷凝器 词汇和制造原则 Textile machinery -- Condensers for cotton spinning -- Vocabulary and principles of construction |
| 84 | ISO 20723-2004 | 结构钢 热轧型材表面条件 交货要求 Structural steels -- Surface condition of hot-rolled sections -- Delivery requirements |
| 85 | ISO 20764-2003 | 石油和有关产品 测定水含量用高沸液体试验馏分的制备 氮气冲洗法 Petroleum and related products -- Preparation of a test portion of high-boiling liquids for the determination of water content -- Nitrogen purge method |
| 86 | ISO 2076-1999 | 纺织品人造纤维属名 Textiles -- Man-made fibres -- Generic names |
| 87 | ISO 2074-1972 | 胶合板词汇两种语言版 Plywood -- Vocabulary |
| 88 | ISO 2073-1976 | 金属铝生产用氧化铝分析用溶液的制备加压下的盐酸反应法 Aluminium oxide primarily used for the production of aluminium -- Preparation of solution for analysis -- Method by hydrochloric acid attack under pressure |
| 89 | ISO 2072-1981 | 金属铝生产用氧化铝锌含量的测定过氧硝酸乙酰酯(PAN)光度法 Aluminium oxide primarily used for the production of aluminium -- Determination of zinc content -- PAN photometric method |
| 90 | ISO 20806-2004 | 机械振动 中等和大型转子现场平衡的准则和护板 Mechanical vibration -- Criteria and safeguards for the in-situ balancing of medium and large rotors |
| 91 | ISO 20805-2005 | 冷成型用高屈服强度、改性成型性能和大厚度成卷热轧钢板 Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming |
| 92 | ISO 20808-2004 | 精细陶瓷(高级陶瓷、高技术陶瓷) 用盘球法测定单片陶瓷的摩擦和磨损性能 Fine ceramics (advanced ceramics advanced technical ceramics) -- Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method |
| 93 | ISO 20807-2004 | 无损检测 无损检测限用人员的资格鉴定 Non-destructive testing -- Qualification of personnel for limited application of non-destructive testing |
| 94 | ISO 20783-2-2003 | 石油和相关产品 阻燃液乳剂稳定性的测定 第2部分：HFB液 Petroleum and related products -- Determination of emulsion stability of fire-resistant fluids -- Part 2: Fluids in category HFB |
| 95 | ISO 20783-1-2003 | 石油和相关产品 阻燃液乳剂稳定性的测定 第1部分：HFAE液 Petroleum and related products -- Determination of emulsion stability of fire-resistant fluids -- Part 1: Fluids in category HFAE |
| 96 | ISO 2080-1981 | 电镀和有关工艺词汇 Electroplating and related processes -- Vocabulary |
| 97 | ISO 2079-1981 | 表面处理和金属镀层术语的一般分类 Surface treatment and metallic coatings -- General classification of terms |
| 98 | ISO 2078-1993 | 纺织玻璃纤维纱线名称与符号 Textile glass -- Yarns -- Designation |
| 99 | ISO 2077-1979 | 纯膨胀软木板弯曲断裂模数的测定 Pure expanded corkboard -- Determination of the modulus of rupture by bending |
| 100 | ISO 20863-2004 | 鞋靴 插中板和港宝化学片的试验方法 粘结性能 Footwear -- Test methods for stiffeners and toepuffs -- Bondability |