序号  标准号 标准名称
1 GB/T 11318.7-1996电视和声音信号的电缆分配系统设备与部件 第7部分:放大器通用规范
Equipments and components used in cabled distribution systems primarily intended for television and sound signals. Part 7: Grneric specifications for amplifier
2 GB/T 11318.8-1996电视和声音信号的电缆分配系统设备与部件 第8部分:干线放大器通用规范
Equipments and components used in cabled distribution systems primarily intended for television and sound signals. Part 8: Generic specifications for trunk amplifiers
3 GB/T 11318.9-1996电视和声音信号的电缆分配系统设备与部件 第9部分:电源设备通用规范
Equipments and components used in cabled distribution systems primarily intended for television and television signals. Part 9: Generic specifications of equipments for power supply
4 GB/T 11320-1989压电陶瓷材料性能测试方法低机械品质因数压电陶瓷材料性能的测试
Test methods for the properties of piezoelectric ceramics material with the low mechanical quality factor
5 GB/T 11321-1989波导元件模数尺寸选择指南
Guide for choosing modular dimensions for waveguide components
6 GB/T 1132-1984直柄机用铰刀
Machine reamers with parallel shanks
7 GB/T 11322.1-1997射频电缆 第0部分:详细规范设计指南 第一篇 同轴电缆
Radio-frequency cables--Part 0: Guide to the design of detail specifications--Section 1--Coaxial cables
8 GB/T 1132-2004直柄和莫氏锥柄机用绞刀
Machine chucking reamers with parallel shanks or morse taper shanks(ISO 521:1975.MOD)
9 GB/T 11323-1989电缆分配系统用单向轴电缆 一般要求和试验
General requirements and tests for single-unit coaxial cables for use in cabled distribution systems
10 GB/T 11324-1995139264kbit/s正码速调整四次群数字复用设备技术要求和测试方法
Performance and test methods of the fourth order digital multiplex equimpent operating at 139264 kbit/s and using positive justification
11 GB/T 11326.1-1989聚烯烃绝缘铝-聚烯烃粘结护套高频农村通信电缆 一般规定
High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath--General
12 GB/T 11326.2-1989聚烯烃绝缘铝-聚烯烃粘结护套高频农村通信电缆 铜芯非填充电缆
High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath--Unfilled cables with copper conductors
13 GB/T 11326.4-1989聚烯烃绝缘铝-聚烯烃粘结护套高频农村通信电缆 铜芯填充电缆
High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath--Filled cables with copper conductors
14 GB/T 11327.1-1999聚氯乙烯绝缘聚氯乙烯护套低频通信电缆电线 第1部分:一般试验和测量方法
Low-frequency telecommunication cables and wires with PVC insulation and PVC sheath--Part 1: General test and measuring methods
15 GB/T 11327.2-1999聚氯乙烯绝缘聚氯乙烯护套低频通信电缆电线 第2部分:局用电缆(对线组或三线组或四线组或五线组的)
Low-frequency telecommunication cable and wires with PVC insulation and PVC sheath--Part 2: Cables in pairs.triples.quads and quintuples for inside installation
16 GB/T 11327.3-1999聚氯乙烯绝缘聚氯乙烯护套低频通信电缆电线 第3部分:终端电缆(对线组的)
Low-frequency telecommunication cables and wires with PVC insulation and PVC sheath--Part 3: Terminating cables in pairs
17 GB/T 1133-1984锥柄机用铰刀
Machine reamers with Morse taper shanks
18 GB/T 11334-1989圆锥公差
Cone tolerance
19 GB/T 11336-1989直线度误差检测
Measurement of departures from straightness
20 GB/T 11336-2004直线度误差检测
Measurement of departures from straightness
21 GB/T 11337-1989平面度误差检测
Measurement of departures from flatness
22 GB/T 11337-2004平面度误差检测
Measurement of departures from flatness
23 GB/T 11338-1989水中钾--40的分析方法
Analytical methods of potassium-40 in water
24 GB/T 1134-1984带刃倾角锥柄机用铰刀
Machine reamers with edge inclination Morse taper shanks
25 GB/T 1134-2004带刃倾角莫氏锥柄机用绞刀
Machine reamers with edge inclination with morse taper shanks
26 GB/T 11343-1989接触式超声斜射探伤方法
Ultrasonic angle beam examination by the contact method
27 GB/T 11344-1989接触式超声波脉冲回波法测厚
Measuring thickness by ultrasonic pulse-echo contact method
28 GB/T 11345-1989钢焊缝手工超声波探伤方法和探伤结果分级
Method for manual ultrasonic testing and classification of testing results for ferritic steel welds
29 GB/T 11346-1989铝合金铸件Χ射线照相检验 针孔(圆形)分级
Standard radiographs for inspection grading of gas porosity(round) in aluminum alloy casting
30 GB/T 11348.1-1999旋转机械转轴径向振动的测量和评定 第1部分:总则
Mechanical vibration of non-reciprocating machines--Measurements on rotating shafts and evaluation criteria--Part 1: General guidelines
31 GB/T 11348.2-1997旋转机械转轴径向振动的测量和评定 第2部分:陆地安装的大型汽轮发电机组
Mechanical vibration of non-reciprocating machines--Measurements on rotating shafts and evaluation criteria--Part 2: Large land-based steam turbine generator sets
32 GB/T 11348.3-1999旋转机械转轴径向振动的测量和评定 第3部分:耦合的工业机器
Mechanical vibration of non-reciprocating machines--Measurements on rotating shafts and evaluation criteria-- Part 3: Coupled industrial machines
33 GB/T 11348.4-1999旋转机械转轴径向振动的测量和评定 第4部分:燃气轮机组
Mechanical vibration of non-reciprocating machines--Measurements on rotating shafts and evaluation criteria--Part 4: Gas turbine sets
34 GB/T 11348.5-2002旋转机械转轴径向振动的测量和评定 第5部分：水力发电厂和泵站机组
Mechanical vibration of non-reciprocating machines--Measurements on rotating shafts and evaluation criteria--Part 5:Machine sets in hydraulic power generating and pumping plants
35 GB/T 11349.1-1989机械导纳的试验确定 基本定义与传感器
Experimental determination of mechanical mobility--Basic definitions and transducers
36 GB/T 11349.2-1989机械导钠的试验确定 用激振器作单点激励测量
Experimental determination of mechanical mobility--Measurements using single-point translation excitation with an attached vibration exciter
37 GB/T 11349.3-1992机械导纳的试验确定 冲击激励法
Experimental determination of mechanical mobility--Measurements using impact excitation
38 GB/T 11351-1989铸件重量公差
Mass tolerances for castings
39 GB/T 1135-1984套式机用铰刀
Shell machine reamers
40 GB/T 1135-2004套式机用绞刀和芯轴
Shell machine reamers and arbors
41 GB/T 11352-1989一般工程用铸造碳钢件
Carbon steel castings for general engineering purposes
42 GB/T 11354-1989钢铁零件 渗氮层深度测定和金相组织检验
Steel-iron parts--Determination of nitrided case depth and metallographic examination of nitriding structure
43 GB/T 11355-1989V带传动 额定功率的计算
V-belt drives--Calculation of power ratings
44 GB/T 11356.1-1997带传动 普通及窄V带传动用带轮(基准宽度制) 槽形检验
Belt drives--Pulleys for classical and narrow V-belts drives(system based on datum width)--Geometrical inspection of grooves
45 GB/T 11356.2-1997带传动 普通及窄V带传动用带轮(有效宽度制) 槽形检验
Belt drives--Pulleys for classical and narrow V-belts drives(system based effective width)--Geometrical inspection of grooves
46 GB/T 11357-1989带轮的材质、表面粗糙度及平衡
Quality.Surface roughness and balance of transmission pulleys
47 GB/T 11358-1999带传动 平带和带轮 尺寸和公差
Flat belt drive pulleys--Diameters
48 GB/T 11361-1989同步带传动 带轮
Synchronous belt drives--Pulleys
49 GB/T 11362-1989同步带传动 额定功率和传动中心距的计算
Synchronous belt drives--Calculation of power rating and drive centre distance
50 GB/T 11363-1989钎焊接头强度试验方法
Methods of the strength tests for brazed and soldered joint
51 GB/T 11364-1989钎料铺展性及填缝性试验方法
Test method of spreadability and clearance filling ability for filler metal
52 GB/T 11365-1989锥齿轮和准双曲面齿轮精度
Accuracy of bevel and hypoid gears
53 GB/T 11366-1989行星传动基本术语
Basic terminology of planetary drives
54 GB/T 11367-1989锥齿轮胶合承载能力计算方法
Methods for the calculation of scuffing load capacity for bevel gears
55 GB/T 11369-1989轻型燃气轮机排气冒烟测量
Light weight gas turbine exhaust smoke measurement
56 GB/T 11370-1989轻型燃气轮机气态污染物测量
Gas emissions measurement of light weight gas turbines
57 GB/T 11371-1989轻型燃气轮机使用与维护
Light weight gas turbine operation and maintenance
58 GB/T 11372-1989防锈术语
Rust prevention terminology
59 GB/T 11373-1989热喷涂金属件表面预处理通则
The general principle of surface preparation of metallic substrate for thermal spraying
60 GB/T 11374-1989热喷涂涂层厚度的无损测量方法
Thermal spraying coating--Nondestructive methods for measurement of thickness
61 GB/T 11376-1997金属的磷酸盐转化膜
Phosphate conversion coatings for metals
62 GB/T 11377-1989金属和其它无机覆盖层储存条件下腐蚀试验的一般规则
Metallic and other non-organic coatings--General rules for corrosion tests applicable for storage conditions
63 GB/T 11378-1989金属覆盖层厚度 轮廓尺寸测量方法
Metallic coatings--Measurement of coating thickness-profilometric method
64 GB/T 11379-1989金属覆盖层 工程用铬电镀层
Metallic coatings--Electroplated coatings of chromium for engineering purposes
65 GB/T 11381-1989客车顶部静载试验方法
Method of static load test for bus top
66 GB/T 11383-1989信息处理 信息交换用八位代码结构和编码规则
Information processing--8-bit code for information interchange--Structure and rules for implementation
67 GB/T 11384-1989信息处理 数据交换用200mm改进调频制记录的位密度为13262磁通翻转/弧度、道密度为1.9道/毫米的双面软磁盘 第一部分:尺寸、物理性能和磁性能
Information processing--Data interchange on 200mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad.1.9 tpmm. on both sides--Part 1:Dimensional.physical and magnetic characteri
68 GB/T 11387-1989压电陶瓷材料静态弯曲强度试验方法
Testing methods for static flexural strength of piezoelectric ceramics
69 GB/T 1139-1984直柄莫氏圆锥和公制圆锥铰刀
Morse and metric taper reamers with parallel shanks
70 GB/T 1139-2004莫氏圆锥和米制圆锥绞刀
morse and metric taper reamers
71 GB/T 1140-1984锥柄莫氏圆锥和公制圆锥铰刀
Morse and metric taper reamers with Morse taper shanks
72 GB/T 11405-1989工业邻苯二甲酸二丁酯
Dibutylphthalate for industrial use
73 GB/T 11406-2001工业邻苯二甲酸二辛酯
Di-(2-ethylhexyl)phthalate for industrial use
74 GB/T 11407-2003硫化促进剂 M
75 GB/T 11408-2003硫化促进剂 DM
76 GB/T 11409.1-1995橡胶防老剂、硫化促进剂熔点测定方法
Test method of fusion point for rubber antiagers and vulcanizing accelerators
77 GB/T 11409.2-1995橡胶防老剂、硫化促进剂 结晶点测定方法
Test method of crystallizing point for rubber antiagers and vulcanizing accelerators
78 GB/T 11409.3-2003橡胶防老剂、硫化促进剂 软化点的测定
Test method of softening point for rubber antiagers and vulcanizing accelerators
79 GB/T 11409.4-1989橡胶防老剂、硫化促进剂加热减量的测定方法
Test method of weight loss on heating for rubber antiager and vulcanizing accelerators
80 GB/T 11409.5-1989橡胶防老剂、硫化促进剂筛余物的测定方法
Test method of residue on sieve for rubber anriager and vulcanizing accelerators
81 GB/T 11409.6-2003橡胶防老剂、硫化促进剂 表观密度的测定
Test method of apparent density for rubber antiagers and vulcanizing accelerators
82 GB/T 11409.7-1989橡胶防老剂、硫化促进剂灰分的测定方法
Test method of ash for rubber antiager and vulcanizing accelerators
83 GB/T 11409.8-1989橡胶防老剂、硫化促进剂粘度的测定方法(旋转粘度计法)
Test method of viscosity for rubber antiager and vulcanizing accelerators (Rotational viscometer method)
84 GB/T 11409.9-2003橡胶防老剂、硫化促进剂 盐酸不溶物含量的测定
Test method of insoluble matter in hydrochloric acid for rubber antiagers and vulcanizing accelerators
85 GB/T 1141-1984锥柄扩孔钻
Core drills with Morse taper shanks
86 GB/T 11412.1-1989海上运输船舶安全开航技术要求 总则
Technical requirements for safety of commencing a sea voyage of sea going transport ships--General rules
87 GB/T 11412.2-1989海上运输船舶安全开航技术要求 甲板部
Technical requirements for safety of commencing a sea voyage of sea going transport ships--Deck department
88 GB/T 11412.3-1989海上运输船舶安全开航技术要求 轮机部
Technical requirements for safety of commencing a sea voyage of sea going transport ships--Engineering department
89 GB/T 11413-1989皮鞋后跟结合强度试验方法
Test method for bond strength of leather shoe heels
90 GB/T 11414-1989实验室玻璃仪器 瓶
Laboratory glassware bottles
91 GB/T 11415-1989实验室烧结(多孔)过滤器 孔径、分级和牌号
Laboratory sintered(fritted) filters--Porosity grading. classification and designation
92 GB/T 11416-2002日用保温容器
Domestic insulated containers
93 GB/T 11418-1989搪瓷耐热性测试方法
Determination of resistance to heat of vitreous and porcelain enamels
94 GB/T 11419-1989搪瓷耐温急变性测试方法
Determination of resistance to thermal shock of vitreous and porcelain enamels
95 GB/T 11420-1989搪瓷光泽测试方法
Measurement of specular gloss of vitreous and porcelain enamels
96 GB/T 1142-1984套式扩孔钻
Shell drills
97 GB/T 1142-2004套式扩孔钻
Shell drills
98 GB/T 11425-1989肉桂油
Oil of cassia
99 GB/T 1143-198460°.90°.120°锥柄锥面锪钻
Countersinks with Morse taper shanks for angles 60. 90 and 120 degree inclusive
100 GB/T 1143-200460°、90°、120° 莫氏锥柄锥面锪钻
Morse taper shank countersinks for angles 60°、90°、120°inclusive
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223